5-ágas 400 A-es csatlakozóbusz biztosítékhordozóhoz

The 5-way 400A BEP busbar is an electrical component designed to interconnect up to five adjacent DC products, such as fuse holders, in marine installations and recreational vehicles. It is specifically optimized for BEP’s Pro Installer system, enabling organized wiring and space savings.

This jumper bar is made from high-purity tin-plated copper. This material choice ensures maximum electrical conductivity and excellent corrosion resistance, which is essential for marine environments.

The busbar can support a continuous current of 400 amperes across all five of its positions. If two adjacent positions are linked, the continuous current capacity can reach 650 amperes, allowing for handling higher electrical loads.

You can connect up to five adjacent DC products to this busbar, thanks to its five separate channels.

The main advantages include significant wiring optimization, substantial space savings in installation, maximum electrical conductivity thanks to tinned copper, and increased corrosion resistance, extending the installation's lifespan.

The overall dimensions of the tiller extension are 8.8 inches in length by 1 inch in width. These compact dimensions allow for streamlined and optimized installations.

Yes, absolutely. It is made of high-purity tinned copper, a material chosen specifically for its high corrosion resistance, making it ideal for demanding marine environments.

It simplifies wiring by consolidating connections from multiple electrical components, such as fuse holders, into a single point. This reduces the need for long, complex individual cables, minimizing clutter and making wire management easier.

The spacing between the mounting holes or connection studs of this tie bar is 2 inches.

This busbar is primarily designed for DC electrical installations in marine applications and recreational vehicles, where reliability and space optimization are critical.

The busbar is typically installed by securing it directly to the rear of adjacent components, such as fuse holders or battery switches, using 3/8-inch connection studs. Ensure all connections are clean and properly tightened.

For installation, you will need appropriate tools to tighten nuts on 3/8-inch studs, such as a socket wrench or an adjustable spanner of the corresponding size. It is also recommended to use a screwdriver if the components to be connected require additional fastenings.

The tie bar is designed for 3/8-inch studs, which is a standard size for many high-current electrical connections in marine applications.

Yes, the design of the link bar allows for some flexibility in its mounting orientation, provided it can be securely fastened to adjacent components and that access for wiring is maintained. However, it is always preferable to follow the manufacturer's specific recommendations for optimal installation.

Yes, it is very important to tighten all electrical connections to the torque recommended by the manufacturer of the connected components (fuse holders, etc.) to ensure good electrical conductivity and prevent loosening due to vibrations. Excessive or insufficient tightening can lead to performance or safety issues.

This tie bar is specifically designed to integrate with BEP's Pro Installer system. It is therefore compatible with fuse holders and other products in the Pro Installer range that use 3/8-inch studs with a 2-inch spacing.

Although optimized for the BEP Pro Installer system, this busbar can be used as a high-current busbar in various applications. It is compatible with any electrical component featuring 3/8-inch studs and a 2-inch spacing between connection points.

Yes, this tie bar is designed to handle direct current and is compatible with 12V, 24V and other common DC voltages in marine and recreational vehicle applications, provided the current capacity of 400A (or 650A) is not exceeded.

It is not recommended to modify or cut the link bar. Any modification could compromise its structural integrity, electrical conductivity, and rated current capacity, potentially nullifying its performance and safety.

Yes, in addition to marine applications, this busbar is also fully suitable for use in leisure vehicles (motorhomes, caravans) or other automotive applications requiring reliable DC power distribution and space savings, provided that current specifications and stud sizes are respected.