ELHAVATOTT - Contour Matrix 600-GDL

The detector integrates automatic solenoid stop control with pulse and hold circuit technology for low power consumption. It also features dual sensor capability, provision for an external alarm, and provision for automatic bilge fan switching.

The BEP Contour Matrix 600-GDL gas detector requires a 10V to 15V DC power supply.

The maximum total current consumption of the 600-GDL detector is 350 mA.

In case of gas presence, the sensor lights up red and a rapid audible alarm sounds.

The green LED indicates that the sensor is in a safe state, no smoke is detected, and no alarm is sounding.

The orange LED indicates that a sensor failure has been detected and a slow beeping sound is emitted.

Derivation mode disables the sensor. A flashing green light indicates the sensor is disabled and in safe mode. A flashing orange light indicates the sensor is disabled and a failure has been detected.

If the sensor gets wet, it becomes inoperative and must be replaced.

The sensor cable supplied is 5 meters long.

Yes, the 600-GDL model is equipped with an integrated automatic solenoid shut-off control.

Yes, the 600-GDL gas detector has a manual override function that disables the gas detector.

Yes, the detector has a provision for connecting an external alarm.

Yes, the bilge alarm is equipped with a provision for automatic switching of the bilge pump.

The BEP Contour Matrix 600-GDL detector has a dual-sensor capability, meaning it can support two sensors.

During the warm-up phase, all indicators flash orange at a slow average speed.

The maximum current per output of the detector is 800 mA.

Yes, the 600-GDL detector integrates pulse-and-hold circuit technology for solenoid control, enabling low power consumption.

Yes, the BEP Contour Matrix 600-GDL gas detector is a marine safety solution.

The detector uses multiple visual indicators:

Green: Sensor safe, no gases detected.Red: Gas alarm triggered.Orange: Sensor failure detected.Flashing green: Bypass mode active, sensor disabled and safe.Flashing orange: Bypass mode active, sensor disabled and failure detected.