Biztosítékvédő hüvely nyomógombos újraindítással – Átlátszó

The BLUE SEA 4135-BSS transparent circuit breaker boot is designed to protect push-button reset circuit breakers in marine environments. It shields the reset mechanism from water, salt humidity, dust, and UV rays, thereby extending the lifespan and reliability of your electrical equipment.

The transparent design of the 4135-BSS boot allows for quick visual inspection of the circuit breaker's condition without disassembly. This facilitates rapid diagnosis and preventive maintenance of electrical systems while providing physical protection against the elements.

No, this boot is specifically sized for BLUE SEA Systems push-button reset circuit breakers. It ensures optimal compatibility and sealing with these models.

Installing the boot usually involves sliding it over the reset button of the circuit breaker and securing it. For breakers mounted on a panel, the boot is often positioned before tightening the breaker's mounting nut, ensuring a secure fit and effective protection. Make sure the power supply is turned off before handling.

Boot 4135-BSS protects the circuit breaker reset mechanism against water (splashes and spray), salt moisture, dust, and ultraviolet (UV) rays. These protections are essential for electrical equipment used in marine environments.

Yes, the BLUE SEA 4135-BSS clear boot is designed to resist UV rays, which is crucial for equipment exposed to sunlight in a marine environment. This helps prevent material degradation and maintains clarity and protective efficiency over time.

No, the BLUE SEA 4135-BSS boot is specifically designed for push-button reset circuit breakers. Its shape and dimensions are not suitable for lever or rocker circuit breakers.

Installing the boot generally does not require specific tools beyond what may be needed for initial circuit breaker assembly (such as a wrench for the mounting nut). The boot simply slides onto the button and is held in place by the circuit breaker's design and its mounting.

No, the 4135-BSS boot is designed to provide protection against splashes, water spray, and moisture. It is not intended to make the circuit breaker watertight in the event of total immersion.

Yes, by covering the reset button, the boot helps prevent accidental activations or deactivations caused by unintended contact or light impacts, while still allowing intentional manipulation.

For optimal watertightness, ensure the boot is correctly positioned over the button and that the circuit breaker is properly installed and tightened, if applicable, so that the boot forms an effective seal with the panel or the circuit breaker body. The boot is designed to fit precisely on compatible BLUE SEA circuit breakers.

Although the boot is designed to resist UV rays and marine conditions, prolonged and extreme exposure can, over time, slightly alter the transparency of any plastic material. However, its design is optimized to minimize this phenomenon and maintain visibility for as long as possible.

No, although Klixon series circuit breakers may have similar protections, the BLUE SEA 4135-BSS boot is specifically sized for BLUE SEA Systems push-button models, ensuring optimal compatibility and sealing with them.

The boot is designed to be flexible and should not significantly affect the operation or tactile feel of the reset button. It allows normal pressure to activate or reset the circuit breaker while providing protection.

Yes, the boot is designed to be removable if necessary, for example for maintenance or replacement of the circuit breaker. It is not permanently fixed, but it stays securely in place once properly installed.

Yes, the boot is designed for the marine environment, which includes resistance to fresh water and salt moisture. Its composition effectively protects against the corrosive effects of salt.

No, the BLUE SEA 4135-BSS circuit breaker block is a separately sold protection accessory. The push-button reset circuit breaker is not included with the block.

Yes, it is strongly recommended to cut the power supply to the relevant circuit before installing or removing the circuit breaker bundle. This is an essential safety measure during any work on electrical components.