Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Megtakarítás: 17%

Blue Sea Systems

7504-BSS

Deckhand fényszabályzó – 24 V DC 6 A

Q: What is the Deckhand 7504-BSS battery charger from BLUE SEA?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates at a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current that this variable speed drive can handle?

The maximum output current that the Deckhand 7504-BSS autopilot drive can deliver is 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and gradual adjustment of light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the delayed illuminated output function?

To activate the illuminated output function:For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute. For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the inverter stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer integrates a memory function that retains the last used light intensity setting.

Q: What is the operating temperature range of this inverter?

The inverter is designed to operate within a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Feszültség: 24 V

12 V 24 V

Áram: 6 A

6 A 12 A

Prix publicBénéficier du tarif pro

39.243 HUF

39.243 HUF ~~47.689 HUF~~

ÁFA-val Szállítás kiszámítása a fizetéskor.

Nincs raktáron

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Vezérlő felület típusa	Interrupteur momentané (ON)-OFF-(ON)
Vezérlés típusa	Modulation de largeur d'impulsion (PWM)
Kompatibilis világítási rendszerek	LED non régulées, incandescentes, halogènes
Zone Control	Non
Működési feszültség-tartomány	18 à 32
Tipikus villamosenergia-fogyasztás	<0.048
Telepítési típus	Montage sur panneau
Termék méretei	82.55 x 88.9 x 50.8 mm
Világítási fokozat szabályozható	Oui
Csomag tartalma	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Termék vonalkódja	SK-000051475
Tanúsítások	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Maximális kimeneti áram	6 A
Névleges feszültség	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Működési hőmérséklet-tartomány	−40°C à 85°C
A termék SKU-ja	7504-BSS
A termék típusa	Variateur d'intensité

Description détaillée

A fedélzeti világítás optimalizálására tervezett BLUE SEA Deckhand 7504-BSS fényszabályzó digitális, 24 V DC feszültségű rendszerekhez. Segítségével vezérelhetőek a szabályozatlan LED-ek, izzólámpák és halogén lámpák. A kivilágított kimeneti funkció késleltetést biztosít a biztonságos hajóra szálláshoz és partra szálláshoz, 1–5 perces beállítható késleltetéssel. A szabályzó több kapcsolóhelyet is támogat, és emlékezik az utolsó fényerő-beállításra.

Funkciók és teljesítmény

A beépített "izzóvédő" (bulb saver) meghosszabbítja az izzók élettartamát a hajóbateria töltésekor. A kitolódó szerelési fülek lehetővé teszik több szabályzó egymás melletti telepítését, optimalizálva a villamos panelben rendelkezésre álló helyet. A beépített túláramvédelem biztosítja a kör biztonságát, a rendszer pedig a szabályzó kapcsolójának lenyomásával indítható újra, amíg a kör villogni nem kezd.

Műszaki adatok és megfelelőség

A Deckhand 7504 névleges feszültsége 24 V DC, működési tartománya 18 V–32 V. Maximális kimeneti árama 6 A. A készenléti áramfelvétele 2 mA alatt van, működési hőmérsékleti tartománya pedig −40°C–85°C. A fényerő szabályozása impulzusszélesség-modulációval (PWM) történik, amely sima változtatást biztosít. A termék megfelel az E, ISO 8846 és SAE J1171 szabványoknak a külső gyújtás elleni védelem tekintetében, igazolva megbízhatóságát a tengeri környezetben.

A BLUE SEA Deckhand termékcsaládban betöltött szerep

A BLUE SEA Deckhand termékcsaládjában a 7504-es modell a 24 V DC 6 A-es referencia. Kiegészíti a 12 V DC-s változatokat, például a 7506 (6 A), 7507 (12 A) és 7508 (25 A) modelleket, valamint a 24 V DC-s nagyobb teljesítményű modelleket, mint a 7509 (12 A). Ez a szabályzó a korábbi 7501 vagy 7502 modellek cseréjére készült, javított teljesítménnyel és funkciókkal a 24 V DC rendszerek számára.

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Deckhand fényszabályzó – 24 V DC 6 A

39.243 HUF

39.243 HUF ~~47.689 HUF~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Deckhand 7504-BSS battery charger from BLUE SEA?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates at a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current that this variable speed drive can handle?

The maximum output current that the Deckhand 7504-BSS autopilot drive can deliver is 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and gradual adjustment of light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the delayed illuminated output function?

To activate the illuminated output function:

For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.
For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the inverter stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer integrates a memory function that retains the last used light intensity setting.

What is the operating temperature range of this inverter?

The inverter is designed to operate within a wide temperature range, from -40°C to 85°C.

What is the energy consumption of the autopilot in standby (parasitic) mode?

The maximum parasitic consumption of the Deckhand drive is less than 2 mA.

Is it possible to use this variable speed drive with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control the lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points on board.

How do offset mounting tabs facilitate installation?

The offset mounting tabs allow multiple drives to be installed side by side in a compact arrangement, thus optimizing the available space on the electrical panel.

What type of switch is included with the Deckhand 7504-BSS dimmer?

The autopilot drive comes with a momentary switch (ON)-OFF-(ON) (PN 8216 reference).

How to connect the inverter to the boat's electrical system?

The dimmer is connected as follows:

The red wire connects to the +24V DC power supply. The two black wires connect to ground (negative bus bar). The blue wire connects to the lamp. The gray and white wires are the inputs for the switch (Down Input and Up Input). A fuse must be installed on the +24V DC line before the dimmer.

What are the dimensions of the Deckhand 7504-BSS autopilot drive?

The Deckhand 7504-BSS drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS drive compliant with marine standards?

Yes, this inverter is E-rated and compliant with the external ignition protection requirements of ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer with LEDs that already have an integrated driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LED lights as well as incandescent and halogen bulbs. Using it with already regulated LEDs may not work correctly or could damage the dimmer or the lights.

Is it necessary to add a fuse when installing the autopilot drive?

Yes, it is necessary to install a fuse on the +24V DC power line before the variable speed drive to ensure circuit protection, as shown in the installation diagram.