ECLIPSE, 1 zóna bővítőmodul

This is a module designed to extend the capabilities of an existing ECLIPSE marine lighting system, developed by Lumishore. It adds an independent lighting zone to your system.

This module adds an independent lighting zone. A complete system can manage up to six distinct lighting zones when paired with an ECLIPSE control center.

Unlike the main control center which manages the first lighting zones and control functions, this module focuses solely on adding an additional lighting zone, enabling modularity in the lighting system.

The module operates at 12 V, with an operating range of 10 to 15 V DC. It must not be connected to voltages outside this range or directly to AC power.

The maximum consumption of the module alone is 0.04 A, with an average power consumption below 0.5 W.

No, the ECLIPSE extension module is designed to extend an existing ECLIPSE marine lighting system and must be connected to an ECLIPSE control center to operate. It cannot be used standalone.

The ECLIPSE expansion module is compatible with the Garmin ECLIPSE control head. It integrates with this control head to increase the number of available lighting zones.

Yes, the ECLIPSE control unit to which this module connects is compatible with Garmin MFDs, Raymarine (via a Raynet to RJ45 A80151 cable), Simrad/B&G (via a Navico 60-0373 conversion cable) and Furuno (via a standard CAT5e Ethernet cable). This multi-platform compatibility ensures integration flexibility.

The expansion module connects to the ECLIPSE control unit via a specific connection cable. The control unit has dedicated ports for expansion modules (1 zone or 2 zones).

No, the ECLIPSE system, including this extension module, is designed to operate only on boats equipped with a 12V system. The operating voltage range is 10 to 15 VDC.

The expansion module must be mounted in a dry location, on a flat (non-curved) surface, and away from any heat or vibration sources to ensure proper operation and durability.

It is strongly recommended that a qualified professional performs the electrical and mechanical installation of the module to ensure correct and safe installation.

Before any installation, always ensure that the ship's power source and battery are disconnected or isolated to prevent any electrical risk.

Each output zone of the ECLIPSE system can handle a maximum load of 10 amperes. The lights are connected directly to the zone outputs of the control center or extension modules.

Yes, the ECLIPSE control unit to which the expansion module is connected must be wired to a suitable circuit breaker or fuse. The maximum total load for the control unit is 30 amperes (10 amperes per zone).

After physical installation, you must access the ECLIPSE control center user interface. Select the 'Setup' icon, then 'Create zone', choose the corresponding zone output, light type, and color. A summary page will appear where you can edit the zone name and select an icon before saving. A power cycle of the control center is required after zone configuration.

Yes, once the zones have been configured via the ECLIPSE control center interface, you can select the color, effect, and intensity for each lighting zone, including those added by the module, and save them as a "Scene". These scenes can include a single zone or multiple zones, and even a zone set to "off".

The system is controlled via the ECLIPSE control center. This can be done via Wi-Fi from a smart device (phone or tablet) by connecting to the ECLIPSE hotspot or the MFD's Wi-Fi, or directly via a compatible multifunction display (MFD) connected to the Ethernet network.