ECLIPSE SL100, Strip Light, 5M - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Megtakarítás: 11%

Garmin

010-04539-00

ECLIPSE SL100, fénypászma, 5 m

Conçue pour l'éclairage d'ambiance, la bande lumineuse Garmin ECLIPSE SL100 de 5 mètres offre une solution flexible et discrète. Avec une protection IP68 et une résistance aux UV, elle est idéale pour les zones humides et extérieures, à l'exception de l'immersion permanente. L'ensemble inclut la bande, des clips de fixation (fournis), un adhésif et du silicone (fourni) pour les extrémités coupées.

Prix publicBénéficier du tarif pro

71.328 HUF

71.328 HUF ~~80.553 HUF~~

ÁFA-val Szállítás kiszámítása a fizetéskor.

Nincs raktáron

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

A termék típusa	Bande lumineuse
Működési feszültség	10-15V DC
Tipikus villamosenergia-fogyasztás	5 W/m par canal
IP védettségi fokozat	IP68
Világítási fokozat szabályozható	Oui
Szalag hossza	5.0
Háton lévő ragasztó	Oui
Bend Restriction Horizontal Axis	Interdit
Current Draw Typical Per Meter	0.41A @ 12V
Anyag	Matériau résistant aux UV
Max Strip Length Per Control Zone	20
Min Bend Radius Vertical	50
Rögzítési típus	Adhésif
Strip Thickness	5.2
Strip Width	10.8
Twist Restriction	Interdit
UV-ellenállás	Oui

Description détaillée

A Garmin ECLIPSE SL100, 5 méteres LED-fénypászma a tengeri dekoratív és közvetett világításra készült. Rugalmas megoldás a fedélzeti hangulat megteremtéséhez. Diszkréten elhelyezhető a fedélzeti korlát, bútorok vagy mennyezeti panelek alá, alternatívát kínálva a direkt fényforrásokkal szemben. Ez a LED-pászma 10–15 V DC feszültségtartományban működik, tipikus fogyasztása kb. 5 watt méterenként és csatornánként, 12 V mellett pedig kb. 0,41 A áramerősség méterenként.

Konstrukció és tartósság

A Garmin ECLIPSE SL100 teljesen beágyazott, UV-álló anyagból készült, biztosítva a tartósságot a tengeri környezetben. IP68-as védettsége teljes víz- és porállóságot garantál. Bár nedves területeken is telepíthető, nem alkalmas folyamatos vízbe merítésre. Méretei kb. 10,8 mm szélesség és 5,2 mm vastagság. A pászma rugalmassága minimális 50 mm-es sugárral a függőleges tengely mentén, de nem hajlítható a vízszintes tengely mentén, és nem csavarható.

Telepítés és vezérlés

Az SL100 pászma telepítése előre felhordott ragasztóval történik. Kültéri, nedves vagy éles ívekben történő telepítés esetén ajánlott a rögzítőklippek (szállítmányban) használata 250–300 mm-enként, a ragasztó kiegészítéseként. A pászma a jelzett vágási pontokon a kívánt hosszra levágható, a szigetelés fenntartásához a mellékelt szilikonnal kell a végeket lezárni. Vezérlése egyszerű kapcsolóval történik monokróm vagy két színű verziók esetén. RGB fénypászmák esetében kötelező az ECLIPSE Command Center és opcionális bővítőmodulok használata a színek és effektusok vezérléséhez. A két színű verzióknál fontos, hogy a kék és fehér csatornákat ne vezéreljük egyszerre.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation pour bande lumineuse ECLIPSE SL100 (5 mètres) (EN)

Avis de l'expert

« ECLIPSE SL100 LED strip: flexibility and IP68 waterproofing for marine ambient lighting »

The Garmin ECLIPSE SL100 LED light strip is positioned as a flexible and discreet ambient lighting solution for boats. Its practical value lies in its ability to create indirect lighting, ideal for highlighting deck lines, illuminating a cockpit under the coamings, or adding an aesthetic touch under steps and in interior compartments. It is perfectly suited to sailboats and cruising yachts where visual integration and soft light diffusion are important criteria, contrasting with more direct and functional lighting.

From an installation perspective, the SL100 offers some versatility. The ability to cut it to the desired length is a major advantage for custom integration. However, it is essential to follow the procedure for sealing cut ends with the provided silicone to maintain the IP68 rating. For sections longer than one meter, installation by two people is recommended to avoid any twisting or horizontal bending that does not comply with the minimum vertical bend radius of 50 mm. In demanding environments such as outdoor areas or wet zones, the systematic use of the provided mounting clips in addition to the adhesive is advised for reliable mechanical retention. It should be noted that RGB versions of the SL100 require an ECLIPSE Command Center, which implies a more complex system integration than simple wiring to a switch.

This strip differs from fixed luminaires by its flexibility and ability to conform to the boat's contours, allowing applications where spotlights or ceiling lights would not be suitable. It offers a clean aesthetic without visible light points. However, its design is not intended for permanent submersion and it must be protected from direct and prolonged exposure to intense sunlight to preserve its materials. Adherence to curvature constraints is also crucial to avoid damaging the strip.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, fénypászma, 5 m

71.328 HUF

71.328 HUF ~~80.553 HUF~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin ECLIPSE SL100 light bar?

The Garmin ECLIPSE SL100 is a flexible 5-meter LED light strip designed specifically for decorative and indirect marine lighting. It allows you to create a pleasant onboard ambiance by discreetly integrating under the gunwales, furniture, or behind ceiling panels, offering an alternative to direct light sources.

What is the length of the ECLIPSE SL100 light strip?

The Garmin ECLIPSE SL100 light strip is supplied in a 5-meter length.

Is the ECLIPSE SL100 LED light bar water-resistant?

Yes, the Garmin ECLIPSE SL100 LED strip is fully encapsulated and has an IP68 protection rating, ensuring complete resistance to water and dust. It can be installed in damp areas but is not designed for permanent submersion.

Can the ECLIPSE SL100 LED light strip be installed outdoors?

Yes, the ECLIPSE SL100 LED strip is designed to be installed both indoors and outdoors. It is made from UV-resistant material. However, it is recommended not to install it in areas exposed to direct strong sunlight.

What are the dimensions of the ECLIPSE SL100 light strip?

The Garmin ECLIPSE SL100 light strip has a width of approximately 10.8 mm and a thickness of approximately 5.2 mm.

What is the power consumption of the ECLIPSE SL100 LED strip?

The typical power consumption of the ECLIPSE SL100 LED strip is approximately 5 watts per meter and per channel. The typical current draw is approximately 0.41 amperes at 12V per meter.

What is the required supply voltage for the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light bar is designed to operate with 12V boats only. It can function within a DC voltage range of 10 to 15 volts. It is critical not to connect it to voltages outside this range or directly to an AC voltage.

Is the ECLIPSE SL100 LED light bar UV-resistant?

Yes, the Garmin ECLIPSE SL100 LED strip is made from UV-resistant material, ensuring durability in a marine environment.

How to install the ECLIPSE SL100 LED strip?

The SL100 strip is installed using a pre-applied adhesive. For optimal bonding, thoroughly clean the mounting surface with IPA to remove dust and dirt. Peel off the adhesive backing and press firmly along the edges of the strip (do not apply pressure on the LEDs). Allow the adhesive to cure for 24 hours before powering on the light strip.

Can the ECLIPSE SL100 LED light strip be cut to the desired length?

Yes, the LED strip can be cut to the desired length. It is imperative to cut only at the marked cut points, using a pair of scissors and a single cutting motion centered on the cut marks. After cutting, the end must be prepared and sealed to maintain waterproofing.

What precautions should be taken when handling the LED light strip?

During handling, do not let the light strip drop or twist. Unroll it carefully from the reel. Do not apply pressure on the strip at the LED level, only on the edges. Do not pull, stretch, twist, or bend the strip along the horizontal axis. For lengths over one meter, it is recommended to use two people for installation.

What is the minimum bending radius of the ECLIPSE SL100 light strip?

The ECLIPSE SL100 LED light strip has a flexibility allowing a minimum bending radius of 50 mm on the vertical axis. It is important not to bend it on the horizontal axis or twist it.

Is it necessary to use additional mechanical fastenings?

For outdoor installations in humid areas or with tight bends, it is recommended to use mechanical fastenings (mounting clips) in addition to the adhesive layer. These fastenings should be spaced every 250 to 300 mm and/or on each side of a bend, avoiding positioning them in line with the LEDs.

Can the ECLIPSE SL100 light strip be permanently submerged?

No, although the ECLIPSE SL100 LED strip is fully sealed and can be installed in wet areas thanks to its IP68 rating, it is not designed for continuous submersion in water.

With which types of boats is the ECLIPSE SL100 LED strip compatible?

The ECLIPSE SL100 LED light bar is designed to operate exclusively with boats equipped with a 12V electrical system. It can operate within a voltage range of 10 to 15V DC.

Is it possible to connect the ECLIPSE SL100 LED strip to an AC power supply?

No, the ECLIPSE SL100 LED light strip must never be connected directly to an alternating current (AC) voltage. It is specifically designed for a direct current (DC) power supply between 10 and 15 volts.

Who should install the ECLIPSE SL100 LED strip?

It is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the ECLIPSE SL100 LED strip to ensure the safety and proper operation of the product.

How to seal the cut end of the LED strip?

To seal the cut end, remove 20 mm of the adhesive backing and lightly scrape the adhesive 10 mm from the end to expose the silicone. Fill the end cap halfway with the provided silicone adhesive, then fit the cap and wipe off any excess adhesive. Allow to cure for 24 hours before handling.

Is the ECLIPSE SL100 LED strip compatible with an ECLIPSE Command Center?

Yes, the ECLIPSE SL100 light strip can be used in conjunction with an ECLIPSE Command Center for advanced control. For RGB versions (if applicable), the use of a Command Center and optional extension modules is mandatory. It is important not to mix single-color, dual-color, and RGB lights on the same Command Center zone output.

Does the Garmin ECLIPSE SL100 product come with a warranty?

Yes, like most Garmin products, the ECLIPSE SL100 light bar is covered by a manufacturer's warranty. To know the specific terms and conditions of the warranty, please refer to the documentation provided with the product or consult Garmin's official website.