LiveScope™ szonda kábel meghosszabbító (0,9 m)

This extension cable has a length of 0.9 meters, which is approximately 3 feet. This dimension is designed to provide additional flexibility when installing your LiveScope™ transducer.

This cable is designed to extend the reach of your LiveScope™ transducer wiring when the standard cable is insufficient. It allows you to optimize the positioning of the transducer and the routing of the cable on your vessel, making installation easier on complex setups.

This LiveScope™ extension cable uses a 21-pin connector. This type of connector is specifically chosen to ensure stable data transmission and adequate power supply between your transducer and the main unit.

Yes, this is an official Garmin extension cable, identified by part number 010-13350-01. It is specifically designed for seamless integration with Garmin LiveScope™ systems.

The reference for this extension cable is 010-13350-01. This is the unique product identification number from Garmin.

Yes, this cable is specifically designed for use with Garmin LiveScope™ transducers, which operate in the marine environment. Its design is robust to ensure reliable performance under these conditions.

No, this cable is specifically designed to maintain signal integrity. Its design ensures stable data transmission and adequate power supply, essential for optimal performance of LiveScope™ transducers.

This cable is designed to provide both stable data transmission and adequate power supply between the LiveScope™ transducer and the main unit. It handles all connectivity requirements of the transducer.

This cable is specifically designed for seamless integration with Garmin LiveScope™ systems. It is intended to work with compatible LiveScope™ transducers.

No, this cable is specifically designed to be compatible with Garmin LiveScope™ range transducers and systems. It is not universally compatible with all Garmin transducers.

No, this cable is specifically designed with a 21-pin connector for Garmin LiveScope™ systems. It is not compatible with transducers from other brands.

This cable is designed for Garmin's LiveScope™ systems. For specific compatibility with LiveScope Plus or LiveScope XR models, consult your transducer's manual or check Garmin's technical specifications for these models, as connectors and requirements may vary.

Installation is straightforward: the extension cable connects between your LiveScope™ transducer's existing cable and your Garmin main unit. It is designed for seamless integration—just plug in the connectors.

You would need this cable when the length of your LiveScope™ transducer's standard cable is insufficient. This can occur with installations on large vessels, complex setups requiring longer routing, or for optimal positioning of the transducer.

No, installing this extension cable usually does not require special tools. It is designed for a simple, direct connection between the transducer and the main unit via its 21-pin connectors.

The product is described as an extension cable. Connecting multiple extension cables in series is not a standard configuration and could potentially affect signal integrity over very long distances. It is recommended to use only a single extension cable if possible, or to consult Garmin's recommendations for longer extensions.

The extension cable must be positioned to connect the LiveScope™ transducer to the main unit (display or module) of your Garmin system. Its purpose is to facilitate routing the cable along your vessel to achieve the desired length and positioning of the transducer.

Yes, although robust, the cable is designed to offer increased flexibility, allowing easier routing on various types of vessels and through cable passages, while maintaining signal integrity.

Garmin cables are generally designed to minimize interference and maintain signal quality, especially in a marine environment where other electronic equipment is present. The 21-pin connector design contributes to stable data transmission.