LUX SL180, Strip Light, Cut-Seal, 1000mm - Garmin image 1

LUX SL180, Strip Light, Cut-Seal, 1000mm - Garmin image 2

LUX SL180, Strip Light, Cut-Seal, 1000mm - Garmin image 3

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Megtakarítás: 12%

Garmin

010-04455-00

LUX SL180, Cut-Seal LED-szalag, 1000 mm

La bande LED Garmin LUX SL180 CRGBW 1000mm offre un éclairage marin personnalisable avec spectre complet et blanc réglable. Classée IP68 et découpable tous les 100mm, elle s'intègre discrètement grâce à son profil de 5 mm et 14,5 mm. Ce modèle de la gamme LUX nécessite un module de pilote Lumishore LUX Strip Light et est fourni avec le nécessaire de coupe et d'étanchéité pour une installation optimisée.

Prix publicBénéficier du tarif pro

23.369 HUF

23.369 HUF ~~26.849 HUF~~

ÁFA-val Szállítás kiszámítása a fizetéskor.

Nincs raktáron

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

A termék típusa	Bande lumineuse LED
Működési feszültség	23-25 V
Tipikus villamosenergia-fogyasztás	5 W
Fény színe	Multicolore (CRGBW)
IP védettségi fokozat	IP68
Világítási fokozat szabályozható	Oui
Szalag hossza	1.0
LED-sűrűség / méter	180.0
Háton lévő ragasztó	Oui
Ragasztó típusa	3M
Cut Interval Mm	100
Depth Mm	5
Driver Compatibility	Lumishore Lux Strip Light Driver Module
Fasteners Recommended	Oui
Magasság	14.5
Telepítési környezet	Intérieur/Extérieur (zones humides)
Min Bend Radius Mm	50
Sealant Included	Oui
UV-ellenállás	Oui

Description détaillée

A Garmin LUX SL180 CRGBW LED-szalag 1000 mm tengeri világításra készült, sokoldalú és testreszabható megoldás. A Garmin/Lumishore LUX termékcsaládjába tartozó modell 100 mm-enként vágható, így pontosan illeszthető a fedélzeti terekhez. A hagyományos LED-szalagokkal szemben a LUX SL180 kifejezetten a tengeri környezetre lett tervezve: teljesen beágyazott kivitelű, UV-álló, IP68-as vízzárási fokozattal rendelkezik.

Világítási teljesítmény és rugalmasság

A LUX SL180 szalag 180 db CRGBW LED-et tartalmaz méterenként, teljes RGB színskálát és 2700 K-től 6500 K-ig hangolható fehér fényt biztosítva. Ez lehetővé teszi a különböző hangulatok kialakítását, a meleg fehér fénytől a hideg fehérig, akár feladatokhoz is. Átlagos fogyasztása 8,7 W/m, névleges teljesítménye 5 watt méterenként. A Lumishore Lux Strip Light vezérlőmodulon keresztül 23–25 V-os bemeneti feszültséggel működik, vagy 10,5–31 VDC feszültségen a LUX vezérlőmodulon keresztül. A szalag áramfogyasztása 0,6 A/m 12 V-on és 0,36 A/m 24 V-on a szalagvezérlőn keresztül. Kompakt méretei (5 mm mélység, 14,5 mm magasság) lehetővé teszik a diszkrét beépítést a fedélzeti korlátok alá, panelek mögé vagy bútorzat alá.

Telepítés és rendszerintegráció

A LUX SL180 szalag telepítése egyszerű a „cut-and-seal” kialakításnak köszönhetően. A kívánt hosszra vágható, és a mellékelt készlettel tömítéssel ellátva IP68-as védettséget biztosít. A szalag rögzítése 3M-ragasztóval történik, külső telepítéshez, nedves területekhez vagy éles ívekhez mechanikai rögzítések ajánlottak. A termék kizárólag Lumishore LUX Strip Light vezérlőmodulokkal használható, mivel harmadik fél vezérlőmodulokkal történő csatlakoztatás a 3 éves garancia elvesztésével jár. A szalag 50 mm-es sugárral csak függőleges irányban hajlítható, vízszintes irányú csavarodás vagy hajlítás tilos. A világítás vezérlése multifunkciós kijelzőn (MFD), Lumishore-kijelzőn, okostelefonon (EOS-LUX vezérlőközpont szükséges) vagy pillanatnyi kapcsolón keresztül (szalagvezérlő szükséges) történhet.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse LUX SL180 (IP68) CRGBW

Avis de l'expert

« Garmin LUX SL180 marine LED lighting: CRGBW flexibility and integration »

The Garmin LUX SL180 LED strip positions itself as a flexible and robust lighting solution for a wide range of marine applications. Its main added value lies in its "cut-and-seal" design and its CRGBW capabilities. This feature allows installers to precisely adapt the strip length to the available space, which is a significant advantage over pre-cut LED strips, reducing waste and optimizing both aesthetic and functional integration. The CRGBW spectrum offers superior lighting versatility, covering not only ambient colors but also tunable white, essential for practical applications such as cockpit or walkway lighting, where color temperature can influence visual comfort.

From an installation perspective, it is imperative to emphasize the necessity of using exclusively Lumishore LUX Strip Light pilot modules. Ignoring this requirement not only voids the warranty but may also compromise the system’s performance and durability. The cutting and sealing process, while simple, must be performed carefully and precisely to maintain the IP68 rating and protection against marine environments. For outdoor installations or areas subject to vibrations, adding mechanical fasteners in addition to the 3M adhesive is a recommended practice to ensure long-term durability. This strip is ideal for recreational boats, sailboats, and yachts seeking discreet or functional accent lighting that is customizable and capable of withstanding marine conditions without being designed for permanent submersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

LUX SL180, Cut-Seal LED-szalag, 1000 mm

23.369 HUF

23.369 HUF ~~26.849 HUF~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Garmin LUX SL180 light bar?

The Garmin LUX SL180 LED light bar is a versatile and customizable LED lighting solution, specifically designed for the marine environment. It is part of Garmin/Lumishore's LUX range and provides CRGBW lighting (cool white, red, green, blue, warm white).

What is the length of the LUX SL180 light strip and can it be cut?

The LUX SL180 LED light strip has a length of 1000 mm. It is designed to be precisely cut every 100 mm, allowing easy adaptation to various spaces on board your boat.

What is the IP rating of the Garmin LUX SL180 LED strip?

The LUX SL180 LED strip has an IP68 waterproof rating. This means it is fully encapsulated and water-resistant, making it suitable for damp areas. However, it is not designed for continuous submersion in water.

What is the power consumption of the LUX SL180 LED strip?

The average power consumption of the LUX SL180 strip is 8.7 W per meter, with a nominal power of 5 watts per meter.

What are the physical dimensions of the LUX SL180 LED strip?

The compact dimensions of the LUX SL180 strip are 5 mm in depth and 14.5 mm in height. These dimensions allow for discreet integration under the gunwales or behind panels.

Is the LUX SL180 light strip UV-resistant?

Yes, the LUX SL180 LED light strip is made from UV-resistant material. However, it is recommended not to install it in areas exposed to strong, prolonged direct sunlight.

How should the light strip be handled during installation?

During installation, handle the strip carefully:

Do not drop or twist it. Do not bend it horizontally or twist it. Do not press on the LED area; only press on the edge of the strip. For lengths over one meter, use two people. Carefully unwind it from the reel and lay it flat in a straight line.

What is the minimum bending radius allowed for the LUX SL180 tape?

The LUX SL180 light strip has a minimum bending radius of 50 mm on the vertical axis. It is imperative not to bend it on the horizontal axis or twist it, as this could damage it and void the warranty.

What are the steps to cut and seal the LED strip?

To cut and seal the tape:

Unroll the tape on a flat surface and identify the cutting point closest to the desired length (every 100 mm). Cut only at the marked cutting points using scissors, in a single motion at the center of the cutting tabs. Remove 20 mm of the adhesive backing at the end to be sealed, then lightly scrape the adhesive 10 mm from the end to expose the silicone. Fill the end cap halfway with the provided silicone adhesive. Attach the end cap, clean off excess adhesive, and allow to cure for 24 hours before handling.

How to install the LUX SL180 LED strip?

The strip can be mounted in several ways:

3M adhesive: Clean the mounting surface thoroughly with IPA, remove the 3M adhesive backing, and press the strip firmly into place. Allow the adhesive to cure for 24 hours before powering on the light.Mechanical fasteners: For outdoor installations, wet areas, or tight bends, mechanical fasteners (mounting clips) should be used in addition to the adhesive. These clips should be spaced 25 to 30 cm apart and/or placed on either side of a bend.Optional mounting clips: For narrow mounting channels, stainless steel metal clips may be provided. They are secured with a countersunk screw.

Is it necessary to disconnect the boat's power supply before installation?

Yes, it is mandatory to always ensure that the boat's power source and battery are disconnected or isolated before installing the LED strip.

Can I install the LUX SL180 strip myself?

It is strongly recommended that a qualified professional perform the electrical and mechanical installation of the LUX SL180 LED strip to ensure proper installation and maintain warranty validity.

What is the drying time of the silicone adhesive after sealing the tape?

After sealing the end of the tape with the supplied silicone adhesive, it is necessary to let the adhesive cure for a full 24 hours before handling the tape or applying tension.

With which autopilot module is the LUX SL180 LED strip compatible?

The LUX SL180 light strip is designed to be used exclusively with Lumishore Lux Strip Light Driver control modules. Using any other third-party lighting control product or driver will void the warranty.

What is the required input voltage range for the LUX SL180 band?

The LUX SL180 light strip operates with an input voltage range of 23-25 V via the Lumishore Lux Strip Light driver module, or 10.5-31 VDC via a LUX control module. It is essential to use only the specified Lumishore driver modules.

Can I connect the LUX SL180 strip to a lighting controller from another brand?

No, the LUX SL180 LED strip must only be connected to Lumishore Lux Strip Light Driver control modules. Using third-party lighting control products or drivers will void the product warranty.

What is the warranty duration for the LUX SL180 light strip?

Lumishore lighting systems and accessories (including the LUX SL180 strip) are warranted against manufacturing defects for a period of three years from the original purchase date.

Which actions can void the warranty of the LUX SL180 LED strip?

The warranty will be void in the following cases:

Misuse, abuse, or incorrect installation.
Negligence, improper handling, or damage caused by disasters (fire, flood, storm, lightning).
Installation by unqualified personnel, unauthorized repair, or unauthorized modification.
Non-approved installations or failure to comply with the installation, maintenance, and use instructions specified in the manual.
Use with third-party drivers other than Lumishore Lux Strip Light Driver modules.

Does cutting and sealing the LUX SL180 LED strip void the warranty?

No, cutting and sealing the LED strip does not void the warranty, provided that all instructions detailed in the installation manual are strictly followed. It is imperative to use only the supplied sealant for sealing.