Kraken 75" elektromos Force® motor Garmin, távirányítóval és beépített GT56UHD-TR szondával

The Garmin Force Kraken electric motor is equipped with a 75-inch shaft, which corresponds to approximately 190 centimeters. This length is specifically designed for high-freeboard boats and open-water sailing, ensuring optimal propeller immersion.

The maximum thrust power of the Force Kraken 75 motor varies depending on the battery configuration:

In 36 V configuration, it delivers 45 kg (100 lbs) of thrust. In 24 V configuration, it delivers 36 kg (80 lbs) of thrust. These values comply with ISO 13342.

The Force Kraken 75" motor integrates a brushless motor that offers several significant advantages:

Extended operating time: It is more energy-efficient, thereby extending battery life.Higher torque and consistent power output: It maintains high performance even in challenging conditions.Minimized electromagnetic interference: This ensures clear depth sounder returns for better fish and underwater structure detection.

Yes, the GT56UHD-TR transducer is integrated directly into the Garmin Force Kraken 75" motor. It provides Ultra High Definition (UHD) sonar views of what is below and to the sides of the boat without requiring additional purchase or installation.

The virtual anchoring technology (Anchor Lock) integrated into the Force Kraken engine allows your boat to automatically hold position at a precise location. This function uses GPS to compensate for current or wind effects, freeing the angler from manually maintaining the boat's position.

The Force Kraken 75" outboard motor is specifically designed for high-freeboard boats and offshore navigation. Its 75-inch (190 cm) shaft length is suited to these types of vessels to ensure sufficient propeller immersion and optimal performance.

Yes, the Garmin Force Kraken 75" electric motor is supplied with a remote control. It allows convenient and easy control of the motor's functions, including steering, speed, and virtual anchoring activation.

Yes, the Force Kraken motor can be used in saltwater or brackish water. However, it is imperative to rinse the entire motor with fresh water after each use in these environments and to apply a water-based silicone spray with a soft cloth. Avoid directing high-pressure water jets toward the cap at the top of the shaft during rinsing.

When installing the engine, it is crucial to follow several precautions:

Always disconnect the engine from the battery before any intervention to avoid electric shocks.Make sure the mounting surface on the boat’s deck is strong enough to support the engine’s weight and force. Use a reinforcement plate or reinforce the boat if necessary.Check that there is enough space to secure the bracket from underneath with washers and nuts.The engine must have sufficient clearance to move from the deployed position to the stowed position without obstructions.Use only hand tools for assembly and follow the specified torque values. Using power tools may damage components and void the warranty.

It is not recommended to print the mounting template yourself. It is preferable to use the template provided in the product box. If you must print it, you must strictly follow Garmin's instructions, ensuring that the print scale is set to 100% and that the paper is of sufficient size. Garmin is not responsible for any damage resulting from incorrect cutting due to failure to follow these instructions.

For installing the quick-release mount, you will need the following tools:

Drill and 9 mm (11/32 in) bitPhillips screwdriver #3 and #411 mm (7/16 in) and 13 mm (1/2 in) socket wrenchTorque wrenchStainless steel countersunk bolts 5/16-18 (M8 x 1.25) if the supplied bolts are too short for the mounting surface.A padlock suitable for outdoor use with a shackle of 6.35 mm (1/4 in) or less is recommended to secure the handle.

To mount the quick-release plate on the boat's deck:

Select a mounting location on the bow, ensuring the deployed engine will be as close as possible to the boat's center and the U-shaped bracket extends beyond the gunwale. Place the provided mounting template and mark the hole locations on the deck. Drill the mounting holes with a 9 mm (11/32 in) bit. Position the quick-release plate on the deck, aligning the holes. Secure the plate with the supplied bolts, washers, and nuts, tightening the nuts to a torque of 14.9 N·m (11 lbf·ft).

To install the quick-release bracket on the engine:

Position the engine on its side. Loosely attach the bracket to the engine using the bolts, washers, and locking nuts provided in the two holes closest to the propeller shaft. Deploy the engine by pressing the unlock lever and rotating the engine head. Secure the bracket to the engine using the remaining bolts, washers, and locking nuts. Tighten all six nuts to 10.85 N-m (8 lbf-ft). Return the engine to its stowed position.

Yes, it is possible to add a LiveScope transducer (sold separately) to the Force Kraken 75" motor using a dedicated LiveScope mounting bracket. This bracket allows the transducer to be mounted on the motor shaft, providing additional real-time sonar capabilities.

Installing a LiveScope transducer on the Force Kraken requires several delicate steps and involves disconnecting the engine from the battery. The key steps are:

Opening the shaft cap and disconnecting internal cables.Removing the skeg and nose cone.Removing the propeller motor and old seals.Passing the LiveScope transducer cables through the shaft.Installing the new seals and propeller motor.Installing cable glands and reinstalling the nose cone and skeg.Attaching the LiveScope mounting bracket and assembling the transducer.It is critical to use only the hardware provided in the LiveScope kit to avoid damaging the engine or the transducer.

Yes, when installing the propeller motor on the shaft base, it is imperative to apply a medium-strength thread locking compound, such as LOCTITE® 243™, to the threads of the six tapped holes. This ensures a secure connection and prevents water infiltration, which could damage the motor.

The LiveScope mount for the Force Kraken motor is compatible with Garmin LiveScope LVS32, LVS34, and LVS62 transducers (sold separately). The mount kit includes specific adapter discs and mounting buttons of various sizes to fit each of these transducer models, ensuring secure and correct attachment.

Yes, the Force Kraken 75" motor is compatible with 24V and 36V electrical systems. Thrust output varies with supply voltage: it delivers 36 kg (80 lbs) at 24V and 45 kg (100 lbs) at 36V, providing flexibility for different boat configurations.

The Force Kraken motor is designed to integrate with the Garmin ecosystem. While the provided document focuses on compatibility with LiveScope transducers, its integration with virtual anchoring technology and minimization of electromagnetic interference for clear sounder returns suggest extended compatibility with Garmin chartplotters and other devices for optimized navigation and fishing experience. It is recommended to consult compatibility specifications for specific accessories.

The motor must be installed at the bow of the boat. However, it is important to check that the deck is strong enough to support the motor's weight and force. A reinforcement plate or additional boat reinforcement may be required if the surface is inadequate. The bracket must be installed so that the U-shaped part extends beyond the gunwale for correct mounting.