Nagyon strapabíró kábel kiegészítő szonda számára (9 m, 8 pólusú)

This extension cable is designed to extend the range of your Garmin transducer cable, allowing greater flexibility in positioning the transducer on your boat and connecting it to your display unit. It is particularly useful when the distance between the transducer and the display device exceeds the original transducer cable length.

This extension cable is 9 meters (or 30 feet) long.

The "ultra-robust" designation indicates that this extension is made with high-quality materials and a reinforced design to withstand marine environment stresses. This includes better resistance to abrasion, twisting, weathering, saltwater, and UV rays, ensuring increased durability and long-term signal integrity.

Yes, as a Garmin product designed for the marine environment and described as "ultra-robust", this cable is specifically manufactured to withstand saltwater corrosion and degradation caused by prolonged exposure to ultraviolet (UV) rays.

Yes, this extension is an original Garmin product. Using branded accessories ensures perfect compatibility and optimal performance with your Garmin equipment.

Yes, the 8-pin connectors on this extension are designed to be watertight when properly connected and tightened to compatible ports on your Garmin sounder and display. It is essential to ensure that the connections are clean and securely fastened to maintain waterproofing.

Yes, the "ultra-robust" design of this extension makes it suitable for marine environments where vibrations may be frequent. Its materials and construction are designed to maintain signal integrity even under mechanical stress. However, it is recommended to secure the cable properly to minimize excessive movement.

Although designed to be robust, the extension cable retains sufficient flexibility to facilitate its passage through conduits and confined spaces on a boat. Its pliability allows for easier installation while maintaining durability.

This extension is compatible with Garmin sounders that use an 8-pin connector. To confirm compatibility, it is recommended to check the connector type of your current sounder or consult the user manual of your Garmin sounder.

Yes, this extension is compatible with many traditional Garmin CHIRP fishfinders (2D) that use an 8-pin connector. Ensure your transducer’s connector matches the 8-pin type of this extension.

Yes, this extension cable is designed to be connected between your Garmin 8-pin transducer and your Garmin display (fishfinder/GPS) with an 8-pin transducer input. It allows you to extend the distance between the two devices.

No, this extension is specifically designed for Garmin equipment and uses an 8-pin proprietary connector. It is not recommended to use it with transducers or devices from other brands, as this could cause compatibility issues, performance problems, or even damage the equipment.

To verify compatibility, inspect the connector on your Garmin transducer. If it is an 8-pin round connector, then this extension cable should be compatible. You can also check the user manual of your transducer or Garmin’s technical specifications on their website to confirm the required connector type.

Garmin's official extension cables are designed to minimize any signal loss. For a 9-meter length, the impact on the depth sounder's signal quality is generally negligible and should not affect the performance of your fishfinder under normal operating conditions, provided the connections are clean and secure.

Compatibility depends on the specific model of your ClearVü or SideVü transducer. Some ClearVü/SideVü transducers use an 8-pin connector (often in combination with a traditional transducer), while others, newer or more complex models, may require a 12-pin connector. Check your transducer’s connector type to ensure compatibility.

Garmin generally does not recommend using multiple extension cables connected in series. While technically possible, this can increase cable resistance and potentially degrade the transducer signal quality, especially over very long distances. It is preferable to use a single extension cable of the appropriate length.

No, installing this extension usually does not require specific tools. Garmin connectors are designed to be hand-tightened, ensuring a secure and watertight connection. Simply ensure the threads are clean and the O-rings are in place and undamaged.

Yes, when installing, ensure you do not excessively bend or pinch the cable, as this could damage the internal conductors. Protect the connectors from dirt and moisture during cable routing. Secure the cable along its path to prevent snagging or unnecessary stress, and ensure connections are tightly secured to guarantee watertightness.

To ensure a watertight connection, thoroughly clean the connectors before assembly. Tighten the extension connectors to the transducer and to the display unit firmly by hand until they are snug. Garmin connectors are designed with internal O-rings that ensure watertightness once properly assembled. Avoid using tools to over-tighten, as this could damage the threads.

No, it is strongly advised against cutting, splicing, or modifying the length of this extension cable. Depth sounder cables are coaxial cables with a specific impedance that is crucial for proper signal transmission. Any modification could alter the impedance, significantly degrade the quality of the depth sounder signal, and void the product warranty.