NMEA 2000 T-elágazó csatlakozó

This connector is an essential component for NMEA 2000 networks aboard vessels. It enables connecting an NMEA 2000 device to the main network cable, called the "backbone", thereby ensuring marine data communication between different equipment.

The Garmin NMEA 2000 "T" connector part number is 010-11078-00.

Yes, this connector is designed to the NMEA 2000 standard and uses "Micro" type connectors. It is compatible with all NMEA 2000 devices and cables with matching "Micro" connectors, regardless of brand.

Yes, the connector is designed for optimal sealing in a marine environment. It includes orange O-rings that provide protection against water and moisture when connections are properly tightened.

This connector has a three-way configuration. It consists of one male connector and two female connectors, allowing you to create a branch on the main NMEA 2000 network.

Absolutely. The NMEA 2000 network is an industry standard. Therefore, this Garmin connector is fully compatible with NMEA 2000 equipment from other manufacturers such as Raymarine, B&G, Simrad, Lowrance, etc., provided they use "Micro"-type connectors.

For installation, the T-connector is placed on the main cable (the "backbone") of your NMEA 2000 network. The two female ends connect to the backbone, and the male end allows you to plug in a drop cable that will lead to your NMEA 2000 device.

No, this connector is designed for secure attachment using clamping nuts that can be tightened by hand. These nuts are designed to prevent cross-threading and ensure a reliable connection. A firm manual tightening is usually sufficient to guarantee both sealing and conductivity.

No, this connector is specifically designed for NMEA 2000 networks. It is not compatible with cables or devices using the NMEA 0183 standard, which is a different communication protocol.

Orange O-rings are sealing elements. They are built into the connector design to create a watertight seal when connections are tightened, protecting electrical contacts from salt water and moisture, which is essential in a marine environment.

The NMEA 2000 "T" connector is a passive component. It is used solely for the physical distribution of the network and does not consume power or process data.

Yes, this "T" connector is ideal for extending an existing NMEA 2000 network. It allows you to easily add new devices by creating new branches on the main backbone cable without having to redo the entire wiring.

Yes, although the main reference is 010-11078-00, a revised version of this connector may have a 45-degree offset. This can affect physical orientation when installing in confined spaces, but functionality remains unchanged.

This T-connector uses NMEA 2000 "Micro" type connectors. This is the most common format for small and medium NMEA 2000 networks.

No, a correctly installed and NMEA 2000-compliant T-connector, like this Garmin model, does not affect the network’s speed or reliability. It provides a stable, transparent physical connection for data transmission.

The connector design includes robust clamping nuts that allow for secure attachment. It is important to tighten these nuts firmly by hand to ensure connections remain stable and do not loosen due to vibrations or boat movements.

The T-connector itself is usually not supplied with protective caps. These caps are separate accessories, often included with NMEA 2000 starter kits or sold individually, to protect unused ports on the "backbone" or devices.

The T-connector is a passive component that attaches to the main backbone cable to create a connection point. The drop cable, on the other hand, is the cable that connects this T-connector to the NMEA 2000 device. The T-connector is the "access point", and the drop cable is the "path" to the device.

This T-connector is designed to extend or create connection points in a network, not to repair a damaged cable. If a cable is damaged, it is generally recommended to replace it or use specific junction connectors for repair, if this is possible and compliant with standards.

Yes, every NMEA 2000 device you wish to integrate into your main network (backbone) will require a T-connector. The T-connector allows you to create the necessary branch to connect the device via a drop cable.