Garmin OnDeck™ kikötői tápegység-érzékelő, hálózati tápegység csatlakozó

This is a device designed to monitor the presence and status of the shore power supply on your vessel. It integrates with the Garmin OnDeck system for remote monitoring.

It detects fluctuations or interruptions in shore power supply. Its role is to help prevent damage to sensitive onboard equipment and identify potentially hazardous poor connections.

The sensor integrates with the Garmin OnDeck system and transmits digital data to the central unit. This information can then be monitored remotely via the ActiveCaptain® mobile application.

The sensor is available in two main versions:

Wired version: Accepts an input voltage of 90 to 264 V AC.Plug-in version: Compatible with standard plugs from 100 to 240 V AC, covering North American, European, UK, and Australian standards.

In wired mode, the Garmin OnDeck™ shore power sensor accepts an input voltage of 90 to 264 V AC.

In plug-in version, the Garmin OnDeck™ shore power sensor is compatible with an input voltage of 100 to 240 V AC.

The Garmin OnDeck™ shore power sensor provides a 5 V DC output voltage.

Yes, the sensor is fully compatible with ActiveCaptain®. Integration with this app ensures fast data transmission and allows you to remotely track your vessel's charge cycle history.

The sensor must be installed in a dry location to prevent any damage. It must also be mounted in a position not exposed to extreme temperatures or conditions, and where it will not be submerged. Adequate ventilation is required.

Yes, several precautions must be observed:

Always disconnect the vessel's power supply before starting installation. Ensure the device is properly grounded before applying power. Install the device when the vessel is ashore or securely moored in calm water conditions. When drilling or cutting, always check what is on the other side of the surface to avoid damaging the vessel.

Installation is flexible and can be completed by following the provided instructions. However, if you encounter difficulties during installation, it is recommended to contact Garmin product support for assistance.

The sensor must be installed in a location not exposed to extreme temperatures or conditions. It must not be submerged and should have adequate ventilation. It is also recommended to mount it at least 102 mm (4 inches) away from cables and other potential sources of interference.

It is imperative not to remove the inline fuse holder when connecting the power cable. The appropriate fuse must be in place, as specified in the product documentation, to prevent any risk of bodily injury or product damage caused by fire or overheating. Connecting the power cable without the appropriate fuse voids the product warranty.

Yes, it is essential to install the shore power sensor in a dry location to prevent any damage to the device.

Yes, the use of OnDeck services, including monitoring via the OnDeck shore power sensor, is subject to a Garmin OnDeck™ service plan. Each OnDeck™ product requires its own service plan.

By continuously monitoring shore power supply, the OnDeck™ shore power sensor quickly detects fluctuations or interruptions. Early detection helps prevent damage to sensitive onboard equipment and identifies potentially hazardous poor connections before they cause major issues.

The Garmin OnDeck™ shore power sensor weighs approximately 90 grams (0.2 lb).

Yes, for the OnDeck system to remain in full-power mode and allow configuration after subscription activation, you must activate the "Boat-in-Use" input or the shore power sensor. Without this, the OnDeck system may enter sleep mode.

The sensor output is compatible with standard 100 to 240 V AC power inputs, specifically those used in North America, Europe, the United Kingdom, and Australia.

Yes, thanks to its integration with the OnDeck system and the ActiveCaptain® app, the sensor allows you to track the charge cycle history of your vessel.