Szívókorongos tartó Garmin GT típusú szondákhoz hátsó táblára

This suction mount is specifically designed to be compatible with Garmin fishfinders from the GT and CV series, which are typically mounted on the transom. It allows for temporary and flexible attachment of these transducers.

This mount is particularly suited to lightweight boats and situations requiring a temporary installation. It is ideal for canoes, kayaks, small inflatable boats or for use on rental boats where drilling the hull is not desirable.

To install the mount, ensure the stern transom surface is clean, smooth, and dry. Firmly press the suction cup against the surface and apply pressure to create adhesion. The mount can then be used to secure your GT or CV transducer.

Yes, the design of this mount allows adjustable angle for the transducer. This flexibility is essential to optimize sonar returns, reduce noise, and ensure clear readings by adapting to water conditions and boat speed.

The suction mount is equipped with a robust suction cup designed to adhere firmly to smooth surfaces, even when the vessel is in motion. It ensures the depth sounder remains securely in place for dynamic use, although it is always recommended to check adhesion regularly, especially at high speed.

The main advantage of this mount is its flexibility and non-invasive nature. It allows for quick installation and removal of the transducer without requiring any hull drilling. This is ideal for users who want to move their transducer between different boats or avoid any permanent modifications to their vessel.

Yes, like most Garmin marine accessories, this mount is designed to withstand marine environments, including exposure to salt water. It is made from durable materials to ensure a long service life under these conditions.

Yes, to ensure optimal adhesion of the suction cup, it is strongly recommended to clean and dry the transom surface where the mount will be attached. A clean and smooth surface guarantees better suction and more secure holding.

Yes, this suction mount (part number 010-11849-17) is an original accessory from Garmin, designed specifically for their GT and CV transducers.

To remove the mount, simply release the suction cup's pressure. Most robust suction cups have a small tab or lever that breaks the vacuum. Gently pull this tab to detach the suction cup from the surface without leaving marks or damage.

Yes, the product description clearly states that this suction mount is compatible with Garmin GT and CV series transducers, designed to be mounted on the transom.

Yes, as long as the mounting surface on the transom is smooth, clean, and non-porous, this suction cup mount can be used on aluminum or fiberglass hulls. The key is to have a flat surface for proper adhesion.

The Garmin suction cup mount (reference 010-11849-17) is a separately sold mounting accessory. The compatible transducer must be purchased separately.

The lifespan of a suction cup depends on its maintenance, frequency of use, and exposure to the elements. However, heavy-duty suction cups designed for marine environments are built to last. Regular cleaning and proper storage will extend its lifespan.

No, this mount is specifically designed for Garmin transducers in the GT and CV series, which are intended to be installed on the transom. Its design and adjustability are optimized for this configuration.

Yes, one of the main advantages of this mount is its portability. Thanks to its suction cup mounting system, it can be easily installed and removed, making it ideal for transferring between different boats without effort or tools.

Although the suction cup is robust and designed to hold the transducer in motion, it is still recommended to monitor adhesion at high speeds. For very high speeds, a permanent installation might be more suitable. The mount is ideal for moderate fishing or cruising speeds.

To maintain optimal grip, regularly clean the suction cup with fresh water and mild soap to remove any salt, sand, or dirt residue. Ensure it is dry before storing. Avoid leaving it exposed to direct sunlight for extended periods when not in use to preserve its elasticity.

Yes, this mount is fully suitable for transducers used in trolling, as it allows horizontal positioning of the transducer in the water and angle adjustment to optimize sonar return quality at trolling speeds.

No, one of the advantages of this mount is that it is non-invasive. Properly installed and removed, it should leave no marks or damage on the smooth surface of your boat's transom, as it requires neither drilling nor permanent adhesive.