Tartó szénszálas árbocra (4 db)

This mount stands out with its construction using carbon fiber for the side panels and anodized aluminum for the front panel. This material combination aims to balance light weight, rigidity, and resistance to marine environments.

This mount is specifically sized to hold four instrument displays. It provides a compact and optimized integration on the mast.

This mount is a dedicated mounting solution for Garmin GNX™ 120 instrument displays.

The weight of this mast mount, for the four-device model and without the devices or cables, is 2.30 kg (5.1 lbs).

The industrial design of this mount is intended for a sleek aesthetic, discreetly integrating into the mast fittings with a so-called "glass mast" approach. It aims to combine lightness, rigidity, and resistance to marine environments.

No, the sun protection cover is not included with this mast mount. However, the mount is designed to allow the attachment of a sun protection cover (in neoprene) via pressure fastenings located at the top and bottom of the mount.

The Garmin mast mount part number is 010-12236-02.

This mount is compatible with masts with diameters ranging from 115 to 200 mm (4 to 8 inches).

No, this mount is specifically designed and dedicated to Garmin GNX™ 120 instrument displays.

This mount is designed for performance sailing. It is compatible with masts with a diameter between 115 and 200 mm (4 to 8 inches).

No, the NMEA 2000 T-connectors and angled drop cables required to connect marine instruments to your NMEA 2000 network are included with the marine instruments themselves, not with the mast mount.

The bracket comes with all necessary hardware to assemble the mount and connect devices to the NMEA 2000 network. This includes mounting screws and threaded rods for securing devices, as well as screws and nuts for NMEA 2000 connectors. A NMEA 2000 backbone cable is also included to extend your network to other instruments.

No, the specific mounting hardware for installing the mast bracket is not included. This hardware must be purchased separately, as it may vary depending on your installation requirements and mast configuration.

For installation, you will need a Phillips screwdriver size #2. A drill and drill bits may be required if you need to drill the mast to attach the bracket. Mounting hardware for the mast must be purchased separately.

The mounting arms of the bracket are not pre-drilled. You will need to drill the holes or prepare the mounting arms of the bracket according to your specific mast mounting requirements.

The devices are secured to the front panel of the bracket using the device straps, threaded rods, and clamping screws provided with the devices. The straps are then fastened to the front panel of the bracket with the included screws.

Yes, a NMEA 2000 backbone cable is included with the bracket. It is used to extend your NMEA 2000 network to the instruments mounted in the bracket.

Sealing gaskets are supplied with the devices (not with the mast mount). They have an adhesive side and must be stuck to the rear of each device, not on the mast mount.

Yes, you must choose a mast location where the mount will not be damaged by normal boat operation. Additionally, if you plan to use a sun protection cover, ensure the top and bottom parts of the mount are accessible for its snap-fit attachment.