Fekete Quantum Q24D Doppler radarantenna 10 m-es táp- és adatkábellel

The Quantum Q24D radar integrates Doppler processing that analyzes target movement in real time. Echoes approaching your vessel are displayed in red, while those moving away appear in green. This feature significantly enhances situational awareness and safety at sea, particularly in high-traffic areas or reduced visibility conditions.

CHIRP pulse-compression technology offers several key advantages:

High image resolution, enabling precise detection of targets at short and long ranges.Low power consumption, which benefits your vessel’s autonomy.Better target separation, even when targets are close to each other.

The key difference lies in the integration of Doppler target processing. The Quantum Q24D adds this essential layer of information, enabling instant identification of moving targets and their direction (approaching in red, receding in green), which was not available on the first generation of Quantum radars.

The physical dimensions of the Quantum Q24D radome are as follows:

Diameter: 541 mm (21.3 in)Height: 209 mm (8.2 in)Weight: 5.6 kg (12.3 lb)

The typical power consumption of the Quantum Q24D radar is approximately 17 watts in transmit mode and 7 watts in standby mode.

Yes, the Quantum Q24D radar has an IPX6 protection rating, meaning it is protected against strong water jets and can be used in a marine environment.

Yes, the Quantum Q24D radome is supplied with a 10-metre power and data cable (RayNet to RayNet), simplifying the installation process.

The Quantum Q24D radar offers connection flexibility:

Wi-Fi connection: Enables simplified wireless connection to a compatible Raymarine multifunction display.Wired connection: Via a RayNet cable for complete and reliable network integration.

Yes, for optimal performance, the antenna must be mounted in a location offering:

An unobstructed view in all directions, free of obstacles to prevent shadow zones and false echoes.A position as horizontal as possible.A sufficient safety distance from the vessel’s compasses to avoid any deviation.

Yes, it is crucial to ensure that the four vent holes located under the radome are clear and unobstructed. These holes allow air circulation and prevent moisture buildup inside the unit.

No, the Quantum Q24D radar does not require a separate ground connection. Grounding is adequately provided via the supplied power cable.

The Wi-Fi password for your Quantum Q24D radar is printed on a label located under the radome. It is recommended to write down this password and keep it in a safe place for future use.

Yes, a mounting template is available to simplify the installation of the radar antenna. It is essential to ensure that this template is printed at full scale before using it to mark the drilling points on the mounting surface.

The Quantum Q24D Doppler radar is compatible with the following Raymarine multifunction displays (MFD):

Axiom, Axiom+, Axiom Pro, Axiom XL series eS, gS series a (models a9, a12) c series (models c9, c12) e series (models e7, e9, e12, e16)

The Quantum Q24D Doppler radar is NOT compatible with the following Raymarine multifunction displays (MFD) / chartplotters:

C-Series Widescreen, E-Series Widescreen, C-Series Classic, E-Series Classic, G-Series, A-Series (models A65, A67, A75, A77, A78)

Yes, to ensure full compatibility and access to all Quantum Q24D radar features, your Raymarine multifunction display must run the latest LightHouse software version. Regular updates are available on the Raymarine website.

For the Doppler processing to work correctly, the multifunction display (MFD) must receive valid speed data. This can come from a GPS source, a speed sensor, or any other appropriate source connected to the system.