Broadband 3G/4G antenos jungiamasis kabelis, 20 m

This connection cable has a total length of 20 meters (approximately 66 feet).

This cable is specifically designed to be compatible with Broadband 3G and Broadband 4G radar systems from B&G, Simrad, and Lowrance.

This cable provides data connection and power supply between the radar scanner (antenna) and the RI10 interface box, which then transmits the information to a compatible multifunction display.

No, this cable is not compatible with newer radar series. It must not be used with the following models:

HALO2000HALO3000HALO20HALO20+HALO24

This cable is equipped with two different connectors:

A proprietary 14-pin connector on the radar scanner side for a robust and watertight connection. A connector intended for the RJ45 port of the RI10 interface box.

Yes, this cable is fully compatible with Broadband 3G and 4G radars from B&G, Simrad, and Lowrance.

No, this cable does not connect directly to the display. It links the radar antenna to the RI10 interface box. This box is then connected to your display or network.

Yes, absolutely. This cable is marine-grade, designed to withstand harsh marine conditions including UV exposure, saltwater, and temperature fluctuations.

The installation guide specifies that the connector diameter is 23 mm. Therefore, you must plan for a hole of this size for cable passage.

This cable is designed to connect the radar antenna to the RI10 interface box.

The reference (SKU or part number) for this 20-meter cable is AA010212.

Yes, this interconnect cable is designed to carry both the radar data signals and the power supply required for the scanner to operate from the interface unit.

Yes, this cable connects a Broadband 3G/4G radar to the RI10 unit, which is itself compatible with B&G multifunction displays in the Zeus range (all models).

Yes, although this product is the 20-metre version, the manufacturer also offers this type of cable in other lengths, including 10 metres and 30 metres, which are sold separately.

Yes, this 20-metre cable is perfectly suited to connect a Simrad Broadband 4G radar antenna to its RI10 interface box.

No specific tools are required to connect pre-assembled connectors. The scanner-side connection screws on by hand, and the RJ45 connection to the RI10 housing simply clips into place.

Yes, this cable is compatible with Broadband 3G/4G radar systems connected to Lowrance HDS multifunction displays (all models) via the RI10 interface box.

Yes, the 20-meter length provides high flexibility for installations on various types of boats, allowing the cable to run from the mast or radar mount to the console where the interface box is located.

Yes, if your radar is a Broadband 3G or 4G model, this cable is the correct choice to connect it to the RI10 interface box, which then connects to a Simrad NSS display (all models).

The connection to the RI10 box is designed to be watertight. Use the supplied gland: pass the cable through it, connect it, then hand-tighten the locking nut to compress the seal and ensure watertightness.