B&G kabelis WS300/700 20 m

No, this 20-metre cable (reference 000-14396-001) is specifically designed for compatibility with B&G WS300 and WS700 wind sensors.

This B&G wind transducer cable is 20 meters long.

Installing the B&G WS300/700 cable requires some marine electronics expertise. It is recommended to consult the wind sensor installation manual and, if necessary, contact a professional.

The B&G WS300/700 cable (000-14396-001) is generally supplied with the necessary connectors for correct installation. Please check the documentation provided with the product for further details.

No, this cable is specifically designed for B&G’s WS300 and WS700 models. Using it with other models may cause compatibility issues and damage your equipment.

Yes, the B&G WS300/700 cable is designed to withstand harsh marine conditions, including UV exposure and saltwater. However, regular inspection is recommended to detect any signs of wear.

The installation manual for the B&G wind sensor (WS300 or WS700) is usually provided with the sensor itself. You can also download it from the B&G manufacturer's website.

The approximate weight of this 20-metre B&G WS300/700 cable is 0.96 kg.

Yes, this B&G WS300/700 20m (000-14396-001) cable is sold individually.

Yes, it is important not to bend or pinch the cable during installation, as this could damage the internal wires. Ensure that the connectors are properly secured and watertight.

This cable connects the wind sensor to the rest of the system. NMEA 2000 compatibility depends on the wind sensor itself and its interface, not directly on the cable.

It is not recommended to cut the cable. If the length is excessive, it is better to coil it carefully, avoiding tight loops. Cutting the cable could affect its performance and void the warranty.

This cable is specifically designed for B&G WS300 and WS700 wind sensors. It is made with marine-grade materials and is built to withstand harsh environmental conditions. A standard cable may not offer the same durability and performance.

The cable itself is designed to withstand moisture and water splashes. However, the waterproofing of the connection will depend on the quality of the connector installation and the use of appropriate seals.

This cable is specifically designed for B&G WS300 and WS700 wind transducers. Compatibility with other models is not guaranteed.

This cable for B&G WS300/700 wind transducer is 20 meters long.

The information regarding the presence of connectors is not available in the product description. It is recommended to check with the supplier or manufacturer.

Installation instructions are usually provided with the product. You can also consult the manufacturer B&G's website for documentation or contact their technical support.

Installing a wind transducer cable may require some marine electronics skills. If you are unsure about performing the installation correctly, it is recommended to hire a professional.

The cable diameter is not specified in the product description. Please refer to the manufacturer's datasheet for this information.

This cable is designed for WS300 and WS700 models. Compatibility with older models is not specified. It is recommended to verify compatibility with the manufacturer.

The presence and duration of any warranty are not mentioned in the product description. Please check the warranty conditions with the seller or manufacturer.

Cutting the cable is not recommended, as it could affect its operation and void the warranty. If a specific length is required, it is best to check if other lengths are available.

The information about the type of connector used is not available in the product description. Please refer to the manufacturer's technical documentation to obtain this information.

This cable is designed to work with B&G WS300 and WS700 wind transducers. Compatibility with instruments from other brands is not guaranteed.

Recalibrating the wind transducer may be necessary after replacing the cable. Consult the wind transducer’s user manual for the calibration procedure.