CZone temperatūros jutiklis SBH 15m

This sensor is designed to measure battery temperature and transmit this data to the Smart Battery Hub. This information is essential for precise charge management and to optimize battery lifespan, particularly for temperature compensation.

The sensor is supplied with a 15-metre (15M) cable, as stated in the product description.

Battery temperature is a critical factor that affects performance, charge efficiency, and lifespan. Extreme temperatures can reduce charge efficiency, accelerate battery degradation, and in some cases pose safety risks. Monitoring enables temperature-compensated charging and better management.

Using this sensor allows the Smart Battery Hub to adjust charging parameters based on the battery's actual temperature. This optimizes charging efficiency, extends battery life, and helps prevent overcharging or undercharging due to temperature variations.

Yes, this sensor is designed by BEP/CZone for use in the marine environment, which implies resistance to typical conditions encountered on board a boat, such as humidity and temperature variations.

No, the temperature sensor is a passive component powered directly by the Smart Battery Hub to which it is connected and does not require a separate external power supply.

The sensor must be mounted directly on a battery terminal or the battery body to obtain the most accurate temperature reading. It then connects to a dedicated port on the Smart Battery Hub. Follow the specific installation instructions in your Smart Battery Hub manual.

For optimal measurement, the sensor should be placed on the negative terminal of the battery or on the side of the battery itself, in direct contact with the surface to accurately reflect the internal temperature. Avoid placing it in a location that could be directly heated by an external source other than the battery.

Installation is generally straightforward and involves physically mounting the sensor to the battery and plugging it into the designated port on the Smart Battery Hub. No complex software configuration is typically required for the sensor itself.

Installation generally does not require specific tools for the sensor itself. Basic tools for handling batteries and cables (such as a wrench for terminals or a screwdriver if a mount is used) may be needed to secure the sensor in place.

It is strongly discouraged to cut or splice the temperature sensor cable, as this could compromise measurement accuracy or signal reliability. The 15-meter length is designed to accommodate various setups.

The sensor connects to a dedicated port on the Smart Battery Hub. This port is usually labeled "Temp Sensor" or similar. The connection is plug-and-play for easy installation.

This sensor is specifically designed to be compatible with BEP and CZone Smart Battery Hubs. It is recommended to check your Smart Battery Hub documentation to confirm compatibility with model 80-716-0032-00.

Yes, the sensor measures the physical temperature of the battery and is therefore compatible with all battery types, including lead-acid batteries (AGM, gel, flooded) and lithium batteries (LiFePO4). The charge management based on this temperature is then handled by the Smart Battery Hub.

This sensor is designed to work specifically with BEP and CZone Smart Battery Hubs. Compatibility with hubs from other brands is not guaranteed and is generally not possible due to proprietary communication protocols and connectors.

Yes, the temperature sensor is a passive component that measures temperature. Its compatibility is not directly related to the system voltage (12V or 24V), but rather to compatibility with the Smart Battery Hub, which is designed to operate in these systems.

Compatibility with older models depends on their specifications. It is recommended to consult the technical documentation for your specific Smart Battery Hub BEP or CZone model or contact technical support to confirm compatibility with sensor 80-716-0032-00.