e-Series Selector Battery Switch with AFD - e-Series Selector Battery Switch with AFD

e-Series Selector Battery Switch with AFD - Mounting Diagram

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 13%

Blue Sea Systems

9002E-BSS

Baterijos atjungimo jungiklis e-Series su AFD

Conçu pour les moteurs in-bord, le sélecteur de batterie Blue Sea e-Series 9002E-BSS avec AFD gère deux parcs batteries avec une intensité continue de 350A. Sa fonction de déconnexion du champ d'alternateur protège les diodes de l'alternateur, et sa certification IP66 assure une durabilité marine. Le sélecteur de batterie est livré seul.

Public priceGet pro pricing

68,04€

68,04€ ~~78,30€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Produkto paskirtis	Gestion de puissance des systèmes électriques marins, sélection et combinaison de parcs de batteries, démarrage d'urgence.
Perjungiklio tipas	Sélecteur 4 positions
Nuolatinė srovė (A)	350
Trumpalaikė srovė (A)	600
Įsijungimo srovė (A)	1200
Maksimali nuolatinė įtampa	32
Polių skaičius	1
Pozicijos	4 (OFF, 1, 2, 1+2)
AFD apsauga	Oui
Gnybto tipas	Goujon, cuivre étamé
Gnybto dydis	3/8"-16 (M10)
Kabelių jungties tipas	Cosses à œillet sous écrou
Valdymo tipas	Manuel rotatif
Montavimo tipas	Montage en surface ou sur panneau
IP klasifikacija	IP66
Veikimo įtampos diapazonas	0-32V DC
Panelio išpjovos skersmuo	92.08
Svoris	0.52
Matmenys (P x A x G)	98 x 98 x 79 mm
Garantija	99.0
Veikiklio spalva	Noir
Actuator Feedback Type	Tactile
Veikiklio stilius	Bouton rotatif
Ampiražas	350
Cable Entry Count	5
Sertifikavimo institucija	IMCI
Suderinamas variklio tipas	Moteurs in-bord essence et diesel
Flange Nut Material	Acier inoxydable
Įrengimo tipas	Montage en surface / sur panneau
Šviesos indikatorius	false
Make Before Break Feature	Oui
Mounting Hole Pattern Compatibility	PERKO, Guest
Operation Restriction Engine Running	Oui
Produkto tipas	Commutateur de batterie
Perjungiklio funkcija	Sélectionne et combine les parcs de batteries
Terminal Stud Design Type	Monobloc
Warranty Period Text	À vie

Detailed description

Sukurtas elektros sistemų jūrinėms įrangoms valdyti, Blue Sea e-Series 9002E-BSS baterijos jungiklis su integruotu AFD siūlo sprendimą sistemoms, kurioms reikalingas patikimas maitinimas ir pažengusi alternatoriaus apsauga. Šis jungiklis leidžia pasirinkti baterijų parką 1 ar 2, arba juos sujungti (1+2) tiek įkrovai, tiek avarinei startui.

Pažengusi apsauga su integruotu AFD

Įjungtas į Blue Sea e-Series 9002E-BSS baterijos jungiklį, alternatoriaus lauko atjungimo įtaisas (AFD) yra esminė saugos savybė. Jis apsaugo alternatoriaus diodus nuo galimų pažeidimų, kai jungiklis perjungiamas į OFF poziciją varikliui dirbant. Nutraukdamas alternatoriaus lauko laidą, AFD sumažina jo išėjimo įtampą iki nulio, užkirsdamas kelią destruktyviems įtampos šuoliams. Ši funkcija yra lemiama jūsų įkrovos sistemos ilgaamžiškumui.

Eksploatacinės savybės ir jūrinė konstrukcija

9002E-BSS suprojektuotas vidaus varikliams (benzininiams ir dyzeliniams), atlaikantis 350A nominalią nuolatinę srovę, 600A trumpo laikotarpio srovę (5 min.) ir 1200A starto srovę (30 s.), esant maksimaliai 32V nuolatinei įtampai. 3/8"-16 (M10) vario lydinio varžtai, 7/8" (22,22 mm) ilgio, užtikrina maksimalią laidumą ir didelį korozijos atsparumą, leidžiant prijungti kelis 4/0 AWG (95mm²) kabelių lizdus. Rekomenduojamas varžtų sukimo momentas – 15,82 N·m (140 in-lb). Funkcija "make-before-break" užtikrina baterijų bankų perjungimą be maitinimo nutraukimo, esminis kritiniams sistemoms.

Saugumas, atitikimas ir montavimas

Šis jungiklis atitinka uždegimo apsaugos reikalavimus (UL 1500, SAE J1171, ISO 8846), todėl tinkamas įrengti ant benzininių laivų. Robusčiausia konstrukcija su IP66 apsaugos laipsniu apsaugo nuo dulkių ir stiprių vandens čiurkšlių, užtikrinant ilgaamžiškumą jūrinėje aplinkoje. Korpusas leidžia montuoti ant paviršiaus arba užpakalinio panelio, suderinamas su dauguma PERKO ir Guest baterijos jungiklių gręžimo modelių. Blue Sea e-Series 9002E-BSS išsiskiria AFD ir IP66 apsaugos integravimu – esminių savybių saugumui ir ilgaamžiškumui jūrinėje aplinkoje. Jis naudoja vario lydinio varžtus, užtikrinančius geresnį laidumą ir korozijos atsparumą, ir priima 4/0 AWG kabelius, garantuodamas optimalią galios valdymą reikalingoms sistemoms. Atitikimas ABYC E-11 ir UL 1107 standartams patvirtina jo patikimumą ir našumą jūrinėje aplinkoje.

Documentation

Type	Nom
	EN - Instructions - e-Series Selector Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector Battery Switch with AFD
	EN - Manual - e-Series Selector Battery Switch with AFD
	EN - Certificate - e-Series Selector Battery Switch with AFD
	EN - Certificate - e-Series Selector Battery Switch with AFD
	EN - Certificate - e-Series Selector Battery Switch with AFD

Expert review

Pol CONIN

Digital Manager

« Technical analysis of the Blue Sea e-Series battery selector with AFD »

The Blue Sea e-Series battery selector with AFD, part number 9002E-BSS, is a critical component for the electrical management of boats equipped with inboard engines, whether gasoline or diesel. Its primary function, the disconnection of the alternator field (AFD), is a key operational feature. It eliminates the risk of damaging the alternator diodes, a common and costly scenario if a standard switch is toggled to OFF while the engine is running. This built-in protection is a decisive advantage over switches lacking this feature, where a handling error can lead to expensive repairs.

Installation is straightforward thanks to its versatile design, allowing surface or rear-panel mounting. It is rated to accommodate heavy-gauge battery cables up to 4/0 AWG, and its tinned copper studs ensure optimal conductivity and long-term corrosion resistance. This robustness is reinforced by its IP66 rating, making it suitable for marine environments exposed to spray and water ingress. It is particularly relevant for vessels where power reliability is critical, such as cruising sailboats or mid-sized powerboats requiring precise management of two battery banks.

While designed for efficient management of two battery banks and alternator protection, it is essential to follow installation procedures, including terminal torque and correct AFD wiring. It does not replace an advanced battery manager for complex systems with multiple charging sources, but excels in its role as a robust and secure selector for standard starting and service configurations.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Baterijos atjungimo jungiklis e-Series su AFD

68,04€

68,04€ ~~78,30€~~

Frequently asked questions

Need help? Contact us

What are the main functions of this Blue Sea e-Series battery selector?

This battery selector allows you to manage two battery banks. You can select bank 1, bank 2, or combine both (1+2) for charging or emergency starting.

What is the integrated AFD function and what is it used for?

AFD stands for "Alternator Field Disconnect" (alternator field disconnection). It is an essential safety function that protects the alternator diodes from damage. If the switch is turned to the OFF position while the engine is running, the AFD cuts the alternator field wire, reducing its output to zero and preventing destructive voltage spikes.

What is the maximum continuous direct current rating this selector can handle?

The Blue Sea e-Series 9002E-BSS battery selector has a continuous rated current of 350 amperes.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32V DC.

Is this product ignition-protected?

Yes, this battery selector is marked "Ignition Protected". It meets the external ignition protection requirements of UL 1500 and SAE J1171.

Is the switch housing waterproof?

Yes, the switch housing is rated IP66, meaning it is protected against powerful water jets.

What are the different switch positions available on this selector?

This selector offers four positions:

OFF: Off. 1: Selects battery bank 1. 2: Selects battery bank 2. 1+2: Combines battery banks 1 and 2.

What are the dimensions of the terminal studs and what material are they made of?

The terminal studs are made of tinned copper, measure 3/8"-16 (M10), and have a length of 7/8" (22.22 mm). They are manufactured in a single piece for maximum conductivity, corrosion resistance, and to reduce the risk of overheating.

What is the intermittent rated current of this switch?

The intermittent rated current of this switch is 600 amperes for 5 minutes (per UL 1107).

What is the cranking rating of this selector?

The cranking rating of this selector is 1200 amperes for 30 seconds.

Where should I install the battery selector?

The battery selector must be installed in an easily accessible location close to the batteries. Its design allows for surface mounting or rear-panel installation.

What type of battery cable is recommended for this switch?

To meet current specifications, use 4/0 AWG (95mm²) battery cables per terminal.

What is the recommended torque for battery cable terminals?

The recommended torque for battery cable terminals is 15.82 N·m (140 in-lb).

How to connect the AFD (Alternator Field Disconnect) device?

To connect the AFD, disconnect the field wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 on the selector.

Are there any precautions to take before installation?

Yes, it is imperative to disconnect the positive terminal of the battery before any installation. It is also advisable to consult a marine electrician for proper wiring and installation information compliant with NFPA 302 and/or ABYC E11 standards.

Can I switch the switch to the OFF position while the engine is running?

No, you must never switch the switch to the OFF position while the engine is running. It is recommended to turn off all electrical devices before setting the battery switch to OFF.

For which types of engines is this battery selector suitable?

This battery selector is designed for high-power applications and is suitable for inboard gasoline and diesel engines.

Is this selector compliant with maritime standards?

Yes, it complies with all American Boat and Yacht Council (ABYC) requirements for battery switches. It is also UL listed (UL 1107 for electrical power switches) and meets external ignition protection requirements UL 1500 and SAE J1171. It is CE certified and compliant with ISO 8846.