Greitasis jungiklis su mygtuko tipo atstatymu – 15 A

A quick-connect circuit breaker is an electrical protection device designed to be easily installed and removed from a circuit. It provides protection against overcurrent and short circuits, and typically resets after tripping, eliminating the need to replace a fuse.

The main function of the BLUE SEA 7056-BSS circuit breaker is to protect marine electrical circuits from overcurrent and overloads. It serves as a practical alternative to traditional fuses, tripping in case of issues and allowing simple reset via a push-button.

This BLUE SEA 7056-BSS circuit breaker has a rated current of 15 amperes (15 A). This means it is designed to protect circuits where the normal current does not exceed 15 A and will trip if the current exceeds this value significantly.

The 7056-BSS circuit breaker provides similar overcurrent protection to a traditional fuse. However, its major advantage is that it can be reset with a simple push-button after tripping, whereas a fuse must be replaced once it has blown. This makes it more convenient and cost-effective in the long run.

No, the BLUE SEA 7056-BSS circuit breaker is a "reset-only" type. It is designed to trip automatically in case of overload and must be manually reset afterward. It does not provide manual circuit interruption and must not be used as an on/off switch.

The 7056-BSS circuit breaker is a simple thermal circuit breaker, ideal for secondary or accessory circuits. Magneto-hydraulic circuit breakers provide more precise protection and are less sensitive to ambient temperature variations, making them suitable for main circuits or critical loads requiring high tripping accuracy.

Yes, the BLUE SEA 7056-BSS circuit breaker is specifically designed for marine electrical circuit protection. Blue Sea Systems products are renowned for their robustness and reliability in marine conditions.

This circuit breaker is ideal for secondary circuits or accessories where simple thermal protection and quick reset are priorities. It can be used to protect equipment such as lighting, bilge pumps, radios, or other low-power electronic devices requiring 15-amp protection.

This circuit breaker features a quick-connect design, which simplifies installation. It is typically equipped with quick-connect terminals (e.g., flat lugs or screw terminals) that allow for simple and secure cable connections to the circuit.

Installing this quick-connect circuit breaker is designed to be straightforward. Basic marine electrical tools, such as a crimping tool for terminals, a screwdriver (if screw terminals), and wire cutters, are typically sufficient. No specialized tools beyond standard wiring equipment are required.

Yes, its quick-connect design and compact dimensions make it easy to integrate into existing electrical panels or junction boxes. It can be used to replace faulty fuses or circuit breakers of the same rating (15 A) in an existing installation.

Yes, cut-out templates and dimensional drawings are usually provided or available to facilitate installation and integration into a panel. These documents help ensure precise fitting during circuit breaker mounting.

The BLUE SEA 7056-BSS circuit breaker is compatible with 12 V and 24 V marine electrical systems. It is designed to operate efficiently within these common onboard voltage ranges.

Yes, this circuit breaker is designed as a direct replacement for 15 A fuses for overcurrent protection. It can substitute a 15 A fuse in most marine applications, offering the advantage of easy reset without replacement.

Yes, as a Blue Sea Systems product, the 7056-BSS circuit breaker is designed to integrate seamlessly with other components from the brand, such as busbars, distribution panels, or fuse blocks, to create a consistent and reliable marine electrical system.

Yes, as long as the electronic device requires 15 amp protection and operates on a 12 V or 24 V system, this circuit breaker is suitable. It is ideal for protecting equipment such as VHF radios, GPS units, fishfinders, or lighting systems.

This circuit breaker provides reliable protection against overcurrents and overloads. It is designed to detect excessive current in the circuit and trip automatically to interrupt the power supply, thereby protecting equipment and wiring from damage.

The 7056-BSS circuit breaker uses a thermal mechanism. In case of overload, excessive current causes an internal component to heat up. As it expands, it triggers the breaker mechanism and opens the circuit. Once the issue is resolved and the breaker has cooled, it can be manually reset using the push-button.

When the circuit breaker trips due to an overload, the push-button usually pops out, indicating that the circuit has been interrupted for safety reasons. Before resetting it, it is recommended to identify and resolve the cause of the overload to prevent another trip.

Yes, although primarily designed for thermal protection against overloads, a circuit breaker such as the 7056-BSS also provides short-circuit protection. A short circuit is an extreme form of overcurrent that causes the circuit breaker to trip rapidly to protect the electrical system.