m-Series Mini Dual Circuit Plus™ Battery Switch - Red - m-Series Mini Dual Circuit Plus™ Battery Switch - Red

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 16%

Blue Sea Systems

6011-BSS

Dvigubas grandiklis Blue Sea m-Series Mini Dual Circuit Plus™ – raudona

Le coupe-batterie BLUE SEA m-Series Mini Dual Circuit Plus™ 6011 est conçu pour les petits moteurs et hors-bords, offrant une gestion isolée de deux bancs de batteries avec une capacité continue de 300A par circuit et une fonction de combinaison d'urgence. Sa conception compacte et sa conformité IP66 en font un choix fiable pour les espaces restreints. Le produit inclut son couvercle isolant amovible.

Spalva: Red

Red Black

Public priceGet pro pricing

61,18€

61,18€ ~~73,68€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Produkto paskirtis	Gérer et isoler deux bancs de batteries, ou les combiner, pour alimenter des charges et protéger l'électronique sensible, idéal pour les moteurs hors-bord et petits moteurs thermiques.
Perjungiklio tipas	Dual Circuit Plus™
Nuolatinė srovė (A)	300
Trumpalaikė srovė (A)	450
Įsijungimo srovė (A)	675
Maksimali nuolatinė įtampa	32
Polių skaičius	2
Pozicijos	3
Gnybto tipas	Goujons
Gnybto dydis	3/8"-16 (M10)
Kabelių jungties tipas	À œillet
Valdymo tipas	Manuel rotatif
Montavimo tipas	Surface, encastré avant ou encastré arrière
IP klasifikacija	IP66
Veikimo įtampos diapazonas	0-32
Panelio išpjovos skersmuo	67
Korpusas: medžiaga	Plastique
Matmenys (P x A x G)	75 x 75 x 84 mm
ABYC atitikimas	Oui
Veikiklio spalva	Rouge
Veikiklio stilius	Rotatif
Ampiražas	300
Automatic Charging Relay Compatibility	Oui
Cable Size To Meet Ratings Awg	4/0
Cable Size To Meet Ratings Mm2	120
Depth Behind Panel Front Mount Mm	19.12
Depth Behind Panel Rear Mount Mm	22.86
Įrengimo tipas	Surface, encastré avant ou encastré arrière
Šviesos indikatorius	Non
Max Terminal Stud Torque	13.56
Nominalioji įtampa	12V/24V
Operation Restriction Engine Running	Ne pas éteindre le moteur en marche
Išėjimo lizdų skaičius	2
Panel Cutout Diameter Rear Mm	59
Produkto tipas	Coupe-batterie
Perjungiklio funkcija	Commutateur de batterie
Terminal Stud Material	Cuivre étamé

Detailed description

BLUE SEA m-Series Mini Dual Circuit Plus™ grandiklis (modelis 6011) yra kompaktiškas ir tvirtas įrenginys, skirtas efektyviai valdyti dvi izoliuotas baterijų grupes. Idealiai tinka laivų varikliams ir mažų benzino ar dyzelino variklių sistemoms. Šis jungiklis užtikrina 300A nuolatinę srovę kiekvienam kontūrui, 675A paleidimo srovę 30 sekundėms ir 450A trumpo trukmės srovę 5 minutėms. Dual Circuit Plus™ funkcija leidžia vienu metu jungti dvi baterijų grupes prie visų apkrovų arba sujungti jas didesniam energijos poreikiui ar avarinėms situacijoms.

Modelis turi 3/8"-16 (M10) cinkuoto vario strypelius, užtikrinančius maksimalų laidumą ir puikią korozijos atsparumą jūrinėje aplinkoje. Vienalaikė strypelių konstrukcija garantuoja stabilų ir ilgaamžišką sujungimą. Izoliuojantis korpusas su trimis nuimamomis šoninemis sekcijomis apsaugo galinius kontaktus ir palengvina kabelių prieigą, leidžiant lanksčiai kabelių tiesimui bet kuria kryptimi.

Pozicionavimas ir Blue Sea Systems asortimentas

Blue Sea Systems m-Series yra kompaktiškiausias šios markės modelis, specialiai skirtas įrenginiams, kur erdvė yra ribojamas veiksnys. Su 300A nuolatine galia jis skirtas laivų varikliams ir mažiems šiluminiams varikliams. Jis skiriasi nuo aukštesnių serijų, tokių kaip e-Series (350A nuolatine galia benzino ar dyzelino varikliams) ir HD-Series (iki 600A, skirtas dideliems dyzelino varikliams). Modelis 6011, turėdamas Dual Circuit Plus™ funkciją, leidžia lanksčiai valdyti baterijas, izoliuodamas paleidimo ir aptarnavimo kontūrus bei siūlydamas jungimo funkciją avarinėms situacijoms, garantuodamas optimalų paleidimo baterijos išsaugojimą ir jautrios elektronikos apsaugą.

Atitikties ir techninės įrengimo reikalavimai

Šis grandiklis atitinka ABYC reikalavimus baterijų jungikliams ir yra sertifikuotas pagal UL 1107. Jis taip pat atitinka UL 1500 ir SAE J1171 normas, skirtas apsaugai nuo išorinio užsiliepsnojimo, todėl tinka benzinu varomų laivų įrengimui. Maksimali darbinė įtampa – 32V DC. Norint užtikrinti optimalų veikimą, rekomenduojama naudoti 4/0 AWG (120 mm²) kabelius prie kiekvieno gnybto, su 13,56 N·m (120 in-lb) sukimo momentu. Kompaktiškos matmenys (apie 74,93 mm x 74,93 mm) ir įvairios montavimo galimybės (paviršius, priekinis panelis, galinis panelis) palengvina integravimą į įvairias sistemas.

Documentation

Type	Nom
	EN - Instructions - m-Series Mini Dual Circuit Plus Battery Switch - Red
	EN - Dimensioned Drawing - m-Series Mini Dual Circuit Plus Battery Switch - Red
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - m-Series Mini Dual Circuit Plus Battery Switch - Red
	EN - Manual - m-Series Mini Dual Circuit Plus Battery Switch - Red
	EN - Certificate - m-Series Mini Dual Circuit Plus Battery Switch - Red
	EN - Certificate - m-Series Mini Dual Circuit Plus Battery Switch - Red
	EN - Certificate - m-Series Mini Dual Circuit Plus Battery Switch - Red

Expert review

Pol CONIN

Digital Manager

« Smart management of two battery banks for small boats »

The BLUE SEA m-Series Mini Dual Circuit Plus™ 6011 battery switch is an essential component for small to medium vessels equipped with two separate battery banks, such as a starter bank and a house bank. Its Dual Circuit Plus™ design is particularly relevant for sailboats and motorboats with outboard or small inboard engines, where power management and circuit isolation are critical.

This model stands out from its e-Series and HD-Series counterparts due to its ultra-compact format and 300A continuous capacity, making it ideal for installations where space is a major constraint. It not only isolates the starter bank to preserve its charge but also protects sensitive electronic equipment from voltage fluctuations during engine start-up. The "combine" function provides additional safety by allowing both banks to be linked in an emergency, for example to start the engine with a weak battery or for critical radio communication.

For installation, the 3/8" (M10) tinned copper stud system is robust and ensures a reliable connection, requiring a tightening torque of 13.56 N·m. Cable access is facilitated by the removable insulating housing. It is recommended to pair it with an Automatic Charging Relay (ACR) to automate the charging of both banks from the engine alternator, thereby optimizing battery lifespan and ease of use. It is imperative to disconnect the positive terminal of the battery before any manipulation and to consult a professional for wiring compliant with ABYC standards.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Dvigubas grandiklis Blue Sea m-Series Mini Dual Circuit Plus™ – raudona

61,18€

61,18€ ~~73,68€~~

Frequently asked questions

Need help? Contact us

What is the primary function of the BLUE SEA m-Series Mini Dual Circuit Plus™ battery switch?

The BLUE SEA m-Series Mini Dual Circuit Plus™ battery switch is designed to manage two isolated battery banks efficiently. It allows simultaneous switching of both banks to all loads, or combining them for increased power needs or emergency situations.

What is the DC current rating of this battery switch?

This battery switch has a DC current rating of 300A DC per circuit.

What are the starting and intermittent capacities of this model?

The capacities of this battery switch are as follows:

Starting current (30 seconds): 675A DC per circuitIntermittent current (5 minutes): 450A DC per circuit

What is the maximum operating voltage supported by this battery switch?

The maximum operating voltage supported by this battery switch is 32 Volts DC.

What are the materials and dimensions of the connection studs?

The connection studs are made of tinned copper for maximum conductivity and corrosion resistance. Their dimensions are 3/8"-16 (M10).

Is this battery switch protected against ignition?

Yes, this battery switch is protected against ignition. It is marked as such and meets the external ignition protection requirements UL 1500 and SAE J1171, as well as ISO 8846 and Directive 94/25/EC (amended by 2003/44/EC).

How does the battery switch design protect the rear contacts?

The battery switch features an insulating housing with three removable side sections. This design protects the rear contacts and simplifies cable access, allowing flexible wire routing in all directions.

What is the length of the connection studs?

The connection studs are 7/8" (22 mm) long.

Is this battery switch waterproof or dustproof?

Yes, this battery switch is rated IP66, meaning it is protected against dust and powerful water jets.

What is the difference between Blue Sea Systems' m-Series and e-Series or HD-Series?

The m-Series, to which this product belongs, is Blue Sea Systems’ most compact series with a continuous capacity of 300A, designed for outboard motors and small heat engines. The e-Series offers a continuous capacity of 350A for inboard gasoline or diesel engines, and the HD-Series is intended for large diesel engines with a capacity of up to 600A.

What type of battery cable is recommended for this battery switch?

Use 4/0 AWG (120 mm²) cable per terminal to meet current specifications. Using smaller cables will reduce current capacity.

What is the recommended torque for connection studs?

The recommended torque for connection studs is 120 in-lb (13.56 N·m).

What precautions should be taken before installing the battery switch?

Before installing the battery switch, it is imperative to disconnect the positive terminal of the battery. It is also advisable to consult a marine electrician for proper wiring.