Vessel Systems Monitor Tank Sender - Diesel, Water, Waste - Vessel Systems Monitor Tank Sender - Diesel, Water, Waste

Vessel Systems Monitor Tank Sender - Diesel, Water, Waste - Dimension Drawing

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 10%

Blue Sea Systems

1810-BSS

Monitorius laivo sistemų bakų jutiklis – dyzelinas, gėlas vanduo, nuotekos

Le capteur ultrasonique BLUE SEA VSM 422 PN 1810 est conçu pour la surveillance précise des niveaux de réservoirs de diesel, d'eau et d'eaux usées. Sans pièces mobiles, il offre une fiabilité et une précision de +/- 3.81mm.

Ce capteur, compatible avec le système VSM 422, est livré avec son joint et s'installe via un montage SAE à 5 boulons, nécessitant un perçage de 1-5/8".

Public priceGet pro pricing

161,04€

161,04€ ~~180,84€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Veikimo įtampa	10-32 V
Veikimo temperatūra	-40 à 85 °C
Rekomenduojamas saugiklio vardinė vertė	5 A
Montavimo tipas	Modèle SAE à 5 boulons
Sertifikatai	ABYC H-24
Palaikomų skysčių tipai	Diesel, eau douce, eaux usées
Palaikomų bakų skaičius	1
Jautiklio jungties tipas	3 fils (vers moniteur VSM 422)
Jautiklio varžos suderinamumas	N/A (ultrasonique)
Konfigūruojami parametrai	Calibrage de la profondeur du réservoir
Konfigūracijos metodas	Via le moniteur de système de bord VSM 422
Jungties tipas	3 fils (non spécifié)
Duomenų išvestis	Niveau de réservoir (via interface 3 fils)
Accuracy	+/- 3.81 mm (0.125")
Digital Filtering Feature	Oui, pour compenser le ballotement des liquides
Įžeminimo tipas	Directement au bus négatif
Sprogimo rizikos apsauga	Oui
Installation Cutout Diameter Mm	41.3 mm (1-5/8")
Maximum Dead Band Top	50.8 mm (2.00")
Didžiausias gylis	812.8 mm (32.00")
Max Mounting Screw Torque	1.7 N·m (15 in-lbs)
Modelio pavadinimas	VSM 422 Ultrasonic Tank Sender
Sensor Design Type	Sans pièces mobiles

Detailed description

Skirtas tiksliai stebėti laivo bakų lygiams, ultragarsinis jutiklis BLUE SEA VSM 422 PN 1810 yra techninė išeitis skirta esminiams skysčiams. Jis specialiai pritaikytas dyzelino, gėlo vandens ir nuotekų bakams, skirtingai nuo PN 1811 modelio, kuris skirtas tik benzino bakams. Šis jutiklis neturi jokių judančių dalių, todėl pasižymi ilgaamžiškumu, eliminuojant mechaninio dilimo ir gedimo riziką, būdingą plūdurių jutikliams.

Tikslumas ir techninė tvirtumas

VSM 422 PN 1810 siūlo matavimo tikslumą ±3,81 mm (0,125"), kas yra privalumas griežtai tvarkant atsargas ir atliekas. Jo konstrukcija įtraukia skaitmeninį filtravimą, kompensuojantį klaidų, atsirandančių dėžėje judant skysčiams, garantuojant stabilų rodmenį net plaukiant. Įrenginys veikia 10–32 V nuolatinės srovės įtampos diapazone ir atlaiko iki 812,8 mm (32,00") bakų gylį. Darbinė temperatūros riba nuo -40°C iki 85°C užtikrina jo veiklą įvairiomis jūrinėmis sąlygomis.

Įrengimas ir atitikimas

Jutiklio įrengimas atliekamas standartiniu 5 varžtų SAE modeliu, su maksimalia sukimo jėga 1,7 N•m (15 in-lbs). Reikalingas 1-5/8" (41,3 mm) skersmens angos. BLUE SEA VSM 422 PN 1810 yra apsaugotas nuo užsiliepsnojimo ir testuotas pagal ABYC H-24 standartą kurui skirtų sistemų komponentams, patvirtinant saugos reikalavimų atitikimą. Jis turi būti tiesiogiai prijungtas prie laivo pagrindinio neigiamo maitinimo laido, kad išvengti didelių apkrovų (pvz., akumuliatorių įkroviklių) interferencijos, garantuojant stabilumą ir tikslumą. Jutiklis tiekiamas su sandarumo tarpikliu, skirtu tiksliai elektrinių jungčių ir montavimo angų išdėstymui.

Documentation

Type	Nom
	EN - Instructions - Vessel Systems Monitor Tank Sender - Diesel, Water, Waste

Expert review

Pol CONIN

Digital Manager

« Reliability of BLUE SEA ultrasonic tank monitoring »

The BLUE SEA VSM 422 PN 1810 ultrasonic sensor represents a significant advancement over traditional mechanical level probes, which are often prone to failure due to moving parts or fouling. Its ultrasonic technology ensures complete non-contact with the fluid, eliminating issues related to corrosion or failure linked to the tank environment. For sailboat or powerboat owners, this type of sensor provides increased reliability for monitoring diesel fuel, freshwater, and wastewater levels—critical information for voyage planning and onboard autonomy.

During installation, it is essential to follow placement recommendations: the sensor must be mounted at least 76.2mm (3.00") away from any wall, bulkhead, or dip tube to avoid parasitic sound reflections that could distort measurements. On irregularly shaped or conical tanks, it is advisable to position it on the deepest part to optimize accuracy. The three-wire wiring, with a 10-32V DC power supply, facilitates integration into most modern marine electrical systems. A key consideration is grounding: direct connection to the main negative bus is mandatory to ensure signal integrity and avoid interference from other current consumers. It is also important to note that if the sensor loses power, the VSM 422 monitor will display the tank as "full," which may have implications for high-level alarm systems.

This sensor is part of a complete monitoring solution with BLUE SEA’s VSM 422 system, offering a high-performance and durable alternative to float or resistance probes.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Monitorius laivo sistemų bakų jutiklis – dyzelinas, gėlas vanduo, nuotekos

161,04€

161,04€ ~~180,84€~~

Frequently asked questions

Need help? Contact us

What type of technology is used by the BLUE SEA VSM 422 PN 1810 tank level sensor?

The BLUE SEA VSM 422 PN 1810 sensor uses ultrasonic technology. This design, with no moving parts, ensures increased reliability and eliminates the risks of wear or mechanical failure commonly associated with traditional float-type sensors.

Which types of fluids are compatible with the VSM 422 PN 1810 tank sensor?

The VSM 422 PN 1810 sensor is specifically designed for monitoring diesel, fresh water, and wastewater levels. It is not compatible with gasoline tanks, for which the PN 1811 model is required.

What is the measurement accuracy of the BLUE SEA VSM 422 PN 1810 level sensor?

The BLUE SEA VSM 422 PN 1810 sensor provides a measurement accuracy of +/- 3.81 mm (0.125"). It also features digital filtering to compensate for errors caused by liquid sloshing in mobile tanks, ensuring stable readings even while underway.

What is the maximum tank depth that the VSM 422 PN 1810 sensor can measure?

The BLUE SEA VSM 422 PN 1810 sensor can measure tanks up to a maximum depth of 812.8 mm (32.00").

What mounting type is required to install the BLUE SEA VSM 422 PN 1810 tank sensor?

The sensor is installed using a standard 5-bolt SAE mounting pattern. A 1-5/8" (41.3 mm) hole is required for tank integration. Maximum recommended bolt torque is 1.7 N•m (15 in-lbs).

What is the required power supply voltage range for the VSM 422 PN 1810 tank sensor?

The VSM 422 PN 1810 sensor operates on a voltage range of 10 to 32 Volts DC. It requires an external power supply and must be connected as directly as possible to the main negative bus of the boat's electrical system to avoid interference from high loads.

Are there specific recommendations for the sensor's location in the tank?

Yes, for optimal performance, the sensor should be located at least 76.2 mm (3.00") from any wall, baffle, dip tube, or other obstruction to avoid sound reflections. Ideally, it should be mounted on the deepest part of the tank if it is conical in shape, or as close as possible to the center of the tank’s top if it is rectangular.

What is the warranty policy for the BLUE SEA VSM 422 PN 1810 tank sensor?

Blue Sea Systems offers a satisfaction guarantee. Any Blue Sea Systems product a customer is not satisfied with can be returned for a refund or replacement at any time.