Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 20%

CZone

80-911-0013-00

CZone SI signalo sąsajos įrenginys

The CZone SI interface (80-911-0013-00) integrates 6 versatile inputs (0-34V DC, 0-1000 Ohms) into the NMEA 2000 network for intelligent automation and monitoring. This IPX5 module is compatible with tank level sensors, switches, and voltage or resistive signals. It is supplied with the main module.

Public priceGet pro pricing

287,82€

287,82€ ~~362,16€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Mažai liko

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Produkto paskirtis	L'interface de signal CZone SI connecte le système CZone à des capteurs externes, des alarmes et des dispositifs de commutation, permettant un fonctionnement intelligent et automatisé des circuits en fonction de l'état de l'entrée.
Komunikacijos protokolas	NMEA 2000
Įėjimų skaičius	6.0
Išėjimų skaičius	0.0
Laidinis įėjimas	Connecteur NMEA 2000
Laidinis išėjimas	Connecteur NMEA 2000
Jungties tipas	Connecteur NMEA 2000
Suderinama su MasterBus	Non
Suderinama su CZone	Oui
Sujungiamas prie NMEA 2000	Oui
Veikimo įtampos diapazonas	9-16 V DC
Montavimo tipas	Montage en surface
IP klasifikacija	IPX5
Matmenys (P x A x G)	100 x 156 x 42 mm
Svoris	0.281
Alarm Trigger Conditions	Interrupteur de niveau d'eau élevé
Analoginio įėjimo varžos diapazonas	0-1000
Analoginio įėjimo įtampos diapazonas	0-34
Analog Input Voltage Range Precise	0-5
Produkto barkodo numeris	80-911-0013-00
Sertifikatai	CE, RCM, NMEA 2000
Suderinamų įrenginių serijos	Tous appareils NMEA 2000
Data Transmission Category	Fluide, Température, Pression
Siunčiami duomenys	Informations de fluide, de température et de pression
Digital Input Voltage Range	0-35
Korpusas: medžiaga	Polycarbonate, ABS
Input Configurability	Oui
Input Signal Type	Interrupteurs (négatif, circuit ouvert, 0-35V DC), sondes de niveau de réservoir (0-5V, 10-180 Ohms, 240-33 Ohms), signaux voltaïques ou résistifs
Input Terminal Type	Bornier à vis
Įrengimo aplinka	Marin
Sąsajos tipas	Interface de signal
Led Status Indication	Oui
MFD suderinamumas	Tous appareils NMEA 2000
Operating Temperature Range C	-20°C à +55°C
Perįtampos apsauga	Oui
Pakuotės svoris	0.363
Tipinis elektros energijos suvartojimas (mA)	100
Maitinimo šaltinis	Alimentation via réseau NMEA 2000
Produkto kategorija (0 lygis)	Marchandise
Produkto kategorija (1 lygis)	NAVICO GROUP
Produkto kategorija (2 lygis)	04 - CZone (40)
Produkto vaidmuo	Intégration de capteurs et interrupteurs externes
Produkto linija	CZone
Produkto tipas	Module d'interface de signal
Produkto tūris (cm³)	655.2
Storage Temperature Range C	-40°C à +85°C
System Automation Functions	Gestion centralisée et automatisée des circuits
Palaikomi bako tipai	Sondes de niveau de réservoir standard (0-5V, 10-180 Ohms, 240-33 Ohms)
Vendor	CZONE
Laidinis tinklas	NMEA 2000

Detailed description

CZone SI (80-911-0013-00) signalo sąsajos įrenginys yra pagrindinis komponentas, skirtas išorinių jutiklių ir jungiklių integruoti į CZone skaitmeninę komutacijos ir stebėjimo sistemą. Sukurtas praplėsti NMEA 2000 tinklo galimybes, jis leidžia centralizuotai ir automatizuotai valdyti grandines naudojant įvairius įėjimo signalus.

Jungčių tipai ir universalumas

Šis modulis turi 6 konfigūruojamus įėjimus, suteikiančius lankstumą įvairioms jūrinėms aplikacijoms. Jis priima įvairių tipų jungiklių signalus (neigiamą, atvirą grandinę, 0-35V DC) grandinių valdymui, taip pat aliarmų signalus, pvz., aukšto vandens lygio jutiklio signalą. Įrenginys palaiko ir standartinius pramoninius bakų lygio jutiklius (0-5V, 10-180 Omai, 240-33 Omai) bei bendro tipo įtampos ar varžos signalus. Įėjimo signalų ribos: 0-1000 Omai varžos signalams ir 0-34V DC įtampai. Kiekvienas įėjimas turi būsenos indikatorių LED, palengvinantį stebėjimą. Šis universalumas išskiria SI sąsają iš paprastesnių įėjimo/išėjimo modulių, kurie apima tik vieną signalo tipą, padarydamas SI sąsają duomenų agregavimo sprendimu CZone sistemai.

Integracija ir techniniai duomenys

CZone SI signalo sąsajos įrenginys integruojamas į NMEA 2000 tinklą, perduodant standartizuotus duomenis, tokius kaip skysčių, temperatūros ir slėgio informaciją į daugiafunkcius ekranus bei kitus suderinamus įrenginius. Jo matmenys: 100 x 156 x 42 mm, o svoris – 281 g. Su IPX5 laipsnio laikinos panardinimo apsauga, jis tinka jūrinėms aplinkoms. Modulis atitinka EMC normas IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1 ir ISO 7637-2, garantuojančias elektromagnetinį suderinamumą ir atsparumą elektrinėms interferencijoms. Jis puikiai papildo esamas CZone sistemas, pvz., Touch 10 ekranus ar kombinuotus modulius, veikdamas kaip NMEA 2000 nepriklausomų jutiklių šliuzas.

Documentation

Type	Nom
	_tchdat_bep1_pdf.pdf
	czone_signal_interface_user_installation_manual_v2.pdf

Expert review

Pol CONIN

Digital Manager

« The CZone SI interface: the analog-to-digital gateway for your NMEA 2000 network »

The CZone SI signal interface is a critical component for any CZone installation seeking to integrate analog or passive sensors and switches into an NMEA 2000 environment. Its primary role is to digitize these signals for use by the CZone system, enabling centralized automation and monitoring.

This module is particularly relevant for retrofits or custom installations where existing equipment (tank float switches, bilge pump switches, hatch position sensors, manual navigation lights) must be connected to the digital network. It eliminates the complexity and cumbersome wiring of traditional analog systems by providing a single interface for 6 inputs. Integrating this interface significantly simplifies wiring topology and alarm management.

It is essential to plan the module’s location to optimize sensor cable lengths and ensure the NMEA 2000 network is properly sized to accommodate it. While IPX5 provides splash resistance, installing it in a dry compartment or under a deck maximizes its lifespan. This module is a smart choice for integrators aiming to offer clients a unified, intelligent management solution for onboard equipment, fully leveraging CZone system capabilities.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

CZone SI signalo sąsajos įrenginys

287,82€

287,82€ ~~362,16€~~

Frequently asked questions

Need help? Contact us

What is the CZone SI signal interface?

The CZone SI signal interface (part number 80-911-0013-00) is a central module designed to integrate external sensors and switches into a CZone digital switching and monitoring system. It extends the capabilities of the NMEA 2000 network for centralized and automated management of circuits from various inputs.

How many configurable inputs does the CZone SI interface have?

The CZone SI signal interface is equipped with 6 configurable inputs, providing great flexibility for various marine applications.

What types of signals can the CZone SI signal interface accept?

This module is versatile and can accept multiple signal types:

Traditional switch signals (negative, open circuit, 0-35V DC) for output control.Alarm triggers, such as a high-water level switch.Industry-standard tank level probes (0-5V, 10-180 Ohms, 240-33 Ohms).General voltage or resistive signals.

What are the specific input ranges for resistive and voltage signals?

The specific input ranges for the CZone SI interface are:

0 to 1000 Ohms for resistive signals. 0 to 34 V DC for voltage signals.

Does the CZone SI interface have status indicators for its inputs?

Yes, each input on the CZone SI signal interface is equipped with an LED status indicator, making monitoring and diagnostics easier.

What are the physical dimensions of the CZone SI signal interface?

The dimensions of the CZone SI signal interface are 100 x 156 x 42 mm.

What is the weight of the CZone SI signal interface?

The weight of the CZone SI signal interface is 281 grams (0.281 kg).

What is the water protection rating of the CZone SI interface?

The CZone SI signal interface has temporary immersion protection with an IPX5 waterproof rating.

How does the CZone SI interface connect to the boat's system?

The CZone SI signal interface integrates with the NMEA 2000 network, enabling standardized communication with other compatible devices in the boat's system.

Is the CZone SI signal interface compatible with multifunction displays (MFD)?

Yes, via its integration into the NMEA 2000 network, the CZone SI interface enables the transmission of standardized data to multifunction displays (MFD) and other compatible devices.

Which tank level sensor types are supported by the CZone SI interface?

The CZone SI interface supports standard industry tank level sensors with signal ranges of 0-5V, 10-180 Ohms, and 240-33 Ohms.

Can the CZone SI interface be used to trigger alarms?

Yes, the CZone SI interface can be configured to accept alarm triggers, such as those from a high water level switch, enabling proactive monitoring.

What is the role of the CZone SI signal interface in a larger CZone system?

In a CZone system, the SI interface acts as a data aggregation solution. It collects information from various sensors and switches, then integrates it into the NMEA 2000 network for centralized management and monitoring.

What types of data does the CZone SI interface transmit on the NMEA 2000 network?

The CZone SI interface transmits standardized data such as fluid levels, temperature, and pressure over the NMEA 2000 network.

Is the installation of the CZone SI signal interface complex?

The CZone SI signal interface is designed for seamless integration into an existing CZone system via the NMEA 2000 network. For optimal installation and configuration of inputs, it is recommended to follow the manufacturer's detailed instructions or consult a professional.

What is the reference number (SKU) of this product?

The reference number (SKU) for the CZone SI signal interface is 80-911-0013-00.

Is the CZone SI interface specifically designed for a marine environment?

Yes, as a CZone product, this interface is specifically designed for marine applications, as evidenced by its IPX5 protection rating and its ability to integrate with NMEA 2000 networks.