Airmar B117 – bronzinė skersinė 600W (50/200kHz) srovės matuoklis su temperatūros jutikliu (8 kontaktų)

The B117 is a transducer with a bronze housing, designed for fiberglass or wooden hulls. The P319 has a plastic housing, better suited for metal hulls to avoid galvanic corrosion issues. Both models offer the same performance in terms of frequency and power.

The Airmar B117 has a power rating of 600W RMS. This means it can transmit a strong signal for precise detection, even in deep water.

This transducer operates at frequencies of 50 kHz and 200 kHz. The 50 kHz frequency is ideal for deep-water detection, while the 200 kHz frequency provides better detail for shallow-water soundings.

Yes, the Airmar B117 integrates a temperature sensor, allowing water temperature to be displayed in addition to depth.

The Airmar B117 is designed to be compatible with Garmin sonar systems. However, it is important to verify specific compatibility with your Garmin fishfinder model. Consult your fishfinder's manual or contact Garmin support for confirmation.

The B117, with its bronze housing, is ideal for fiberglass or wooden hulls. For metal hulls, use the P319 plastic model to prevent galvanic corrosion.

The beam angle of the B117 varies depending on the frequency. At 50 kHz, the angle is approximately 45 degrees, while at 200 kHz, it is approximately 12 degrees.

Although designed for Garmin systems, the Airmar B117 may be compatible with certain fishfinders from other brands. Compatibility will depend on the fishfinder's specifications and its ability to accept an 8-pin transducer connector and the 50/200kHz frequencies.

Airmar offers an anti-fouling coating (Foulfree) that can be applied to the transducer to prevent marine organisms from adhering. This coating extends the transducer's lifespan and maintains optimal performance.

Yes, the B117 is designed for use in saltwater. Its bronze housing is corrosion-resistant.

The Airmar B117 uses an 8-pin connector.

The transducer is supplied with the standard mounting kit, including a sealing gasket. However, specific tools (drill, etc.) are not included.

Yes, detailed installation documentation is available on Airmar's website and in the product packaging.

Yes, the B117 is compatible with fiberglass composite hulls. It is important to follow the installation instructions to ensure proper sealing.

Regular cleaning of the transducer is recommended to remove dirt and marine organisms. Applying an antifouling coating can also reduce the frequency of cleanings.