Laikiklis nulio laipsnių LiveScope™ XR ant stiebo

The primary function of this mount is to position the LiveScope™ XR LVS62 transducer at a fixed 0-degree angle. This optimizes the downward sonar view for detailed and precise vertical analysis directly beneath the boat or ice hole.

This mount is specifically designed for the Garmin LiveScope™ XR LVS62 transducer.

This mount positions the transducer at a fixed 0-degree angle, which is ideal for a downward-looking sonar view.

Benefits include optimized downward sonar view, detailed and precise perspective directly beneath the boat or ice hole. It is essential for ice fishing and open-water fishing requiring vertical analysis, maximizing clarity and accuracy of sonar returns in this specific setup.

Yes, its construction is sturdy and weather-resistant, providing a stable platform for the LVS62 transducer in marine environments.

No, this mount is designed to fix the transducer orientation at a 0-degree angle, providing a "true top-down perspective" with no angle adjustment capability.

Yes, it differs from the multi-purpose mounting options (such as pole mounting, electric motor shaft mounting, or perspective mode bracket) that offer multiple viewing angles. This mount is optimized for a strictly vertical and fixed view.

The product reference (SKU) for this item is 010-13248-02.

The barcode (EAN) for this product is 0753759300098.

No, this mount is a mounting accessory for the LiveScope™ XR LVS62 transducer. The mounting pole and the LiveScope™ XR LVS62 transducer are sold separately.

No, this mount is designed specifically for the LiveScope™ XR transducer LVS62 and is not compatible with other Garmin LiveScope™ transducers such as the LVS32 or LVS34.

Yes, this mount is designed to integrate with existing LiveScope™ XR systems, as it is specifically intended for the LiveScope™ XR LVS62 transducer, which is part of these systems.

For installing the LiveScope™ XR LVS62 transducer, the tools generally required are:

A drillA drill bit suitable for the GLS™ 10 sonar module and the chosen mounting surfaceA flat-head screwdriver or an 8 mm wrenchElectrical tape (preferred) or cable ties

Yes, it is necessary to update the Garmin chartplotter software when you install the LiveScope™ XR LVS62 transducer. Update instructions are found in your chartplotter's owner manual.

Yes, it is crucial to secure the transducer cable to prevent any damage or failure. The cable must be routed so that it does not come into contact with the propeller, is not pinched during deployment or stowage, and is not too close to electrical interference sources.

No, this bracket is designed to permanently secure the transducer at a 0-degree angle, so it does not require frequent adjustments once installed.

This mount is designed to be installed on a dedicated pole, providing a consistent vertical view regardless of an electric trolling motor.

The transducer cable should be routed to avoid damage. It is recommended to create a service loop of at least 25 cm (10 in) long and secure it with black electrical tape or loosely tightened cable ties to prevent cable fatigue.

Yes, to comply with FCC regulations and reduce electromagnetic interference (EMI), it is recommended to install a ferrite bead on each transducer cable, near the connector.

This mount is a dedicated mounting option for the LiveScope™ XR LVS62 transducer and is designed for a specific 0-degree view. It differs from standard mounting kits, which provide versatile views (forward, downward, perspective), and is not a direct replacement for these versatile mounts.