Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - Garmin

Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - visuel officiel Garmin 2

Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - visuel officiel Garmin 3

Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - visuel officiel Garmin 4

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 15%

Garmin

010-02706-00

Sistema LiveScope™ Plus su sonde GLS 10™ ir LVS34

Le système Garmin LiveScope™ Plus avec sonde GLS 10™ et LVS34 offre une visualisation sonar en temps réel avancée. Ce système complet est conçu pour améliorer la connaissance situationnelle sous-marine. Le kit inclut le module GLS 10™, la sonde LVS34, le kit de montage sur tableau arrière et la visserie nécessaire.

Konfigūracija: Visas rinkinys

Visas rinkinys LVS34 echoloto atskirai LVS34-IF jutiklis

Public priceGet pro pricing

1.863,56€

1.863,56€ ~~2.199,00€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Echoloto technologijos	LiveScope
Sonaro dažniai	530-1170 kHz (LiveScope) ; 800 kHz (DownScan) ; 455 kHz (SideScan) ; 200 kHz (Sonar traditionnel)
Su derinami displėjai	Tout afficheur Garmin compatible avec le réseau Garmin (ex: ECHOMAP Ultra, GPSMAP) et le module GLS 10
Magistralės suderinamumas	NMEA 2000,Garmin Marine Network
Laidinis tinklas	Garmin Marine Network,NMEA 2000
Belaidis ryšys	Aucune
Montavimo tipas	Arrière (transom)
Žvejybos tipas	Lac, Rivière, Mer
Įmontuota GPS antena	Non
Įmontuotas greičio jutiklis	Non
Paketo turinys	Module sondeur GLS 10, Sonde LVS34, Kit de montage arrière, Câble d'alimentation, Câble réseau, Documentation
Išleidimo metai	2022.0

Detailed description

Sistema Garmin LiveScope™ Plus su sonde GLS 10™ ir LVS34 yra pažangiausia realaus laiko sonaro vaizdavimo sistema. Jį sudaro GLS 10™ sonaro modulis ir LVS34 sonde. Šis rinkinys skirtas suteikti dinamišką ir momentinį situacijos supratimą po vandeniu. Skirtingai nuo tradicinių sonaro sistemų, kurios gali pateikti statišką vaizdą arba vėluojančius skenavimus, LiveScope Plus suteikia neatidėliotiną perspektyvą, būtiną navigacijai ir objektų ar struktūrų aptikimui. Privaloma atnaujinti Garmin žemėlapio braižytuvo programinę įrangą įdiegiant šį įrenginį, kad užtikrinti suderinamumą ir optimalų veikimą.

Įdiegimas ir eksploatacinės pastabos

Įdiegimas LiveScope™ Plus LVS34 galinės lentos tvirtinimo komplekto reikalauja ypatingo dėmesio, siekiant užtikrinti patikimumą ir našumą. Proceso metu naudojami specialūs įrankiai: gręžtuvas, 17 mm raktai (įskaitant dinamometrinį raktą, suveržiant 20 N·m arba 15 lbf·ft), kryžminis atsuktuvas nr. 2, lipni juosta ir jūrinis mastikas. Pilotiniai gręžiniai turi būti atlikti 4 mm (5/32 colio) grąžtu 19 mm (7/10 colio) gylį, o tvirtinimui naudojamos 20 mm varžtai su jūriniu mastiku. Kabeliai gali būti vedami per 32 mm (1 1/4 colio) prakišos angą arba per galinės lentos viršų, vengiant elektros trukdžių šaltinių.

Montavimo ypatumai yra lemiami: sonde negali būti įrengta ties propelerio taku, už turbulenciją ar oro burbuliukus sukeliančių elementų, ir turi būti montuojama kuo arčiau laivo centro ašies. Už bortinių ar sterndraivinių variklių turėtų būti montuojama ant dešiniojo borto, kur propelerio ataka leidžiasi žemyn. Reikia atkreipti dėmesį, kad sonde našumas ribotas esant greičiams virš 19 km/h (12 mylių/val.), kai dugno grįžtamasis signalas ir gylio duomenys gali sumažėti. Be to, dideliu greičiu sonde trauka gali paveikti kurso stabilumą, potencialiai sumažinti maksimalų greitį arba sukelti dreifą. Garmin pabrėžia, kad sonaro duomenys skirti tik situacijos supratimui ir negali užkirsti kelio visų seklumų ar susidūrimų. Galinės lentos tvirtinimo atramos nėra skirta lūžti smūgio atveju, o po vandeniu esančių objektų sužalojimai nėra apdrausti garantija.

Padėtis Garmin asortimente

LiveScope™ Plus su sonde GLS 10™ ir LVS34 yra pažangiausias siūlymas Garmin realaus laiko sonaro sistemų asortimente. Jis skirtas reikliesiems naudotojams, kuriems reikalinga neatidėliotina ir detalizuota po vandeniu matomumo, tiek sportinei žvejybai, tiek precizinei navigacijai. Ši sistema yra esminė sudedamoji dalis suderinamų Garmin žemėlapio braižytuvų, siūlančių sklandų integravimą ir pranašesnes displėjaus galimybes pilnai jūros aplinkos įsisąmoninimui. Rekomenduojama profesionalaus kvalifikacijos įrenginio įdiegimas, siekiant optimizuoti našumą ir įrangos ilgaamžiškumą. Įdiegimo pagalbos vaizdo įrašai prieinami garmin.com/videos/lvs34.

Documentation

Type	Nom
	Notice d'installation - Instructions d'installation du kit de montage tableau arrière LiveScope Plus LVS34 (EN)

Expert review

Pol CONIN

Skaitmeninės veiklos vadovas

« Technical Analysis: Garmin LiveScope Plus LVS34 System »

The Garmin LiveScope™ Plus system, integrating the GLS 10™ module and LVS34 transducer, represents a significant advancement in real-time underwater situational awareness. As an engineer and installer, I emphasize the critical importance of installation in strict compliance with the provided guidelines. The transom-mount kit, while robust for normal use, is not designed to absorb impacts, and any damage caused by underwater collisions is not covered by the warranty. It is therefore essential to select a mounting location that minimizes shock risk while optimizing transducer performance.

Mechanical installation requires precision: pilot hole drilling (4 mm) and through-hull fitting (32 mm if required) must be executed carefully. Applying marine sealant and adhering to the 20 N-m (15 lbf-ft) torque specification for support bolts are critical for hull integrity and transducer stability. Cable routing must strictly avoid electrical interference sources to ensure signal clarity. Additionally, a software update for the Garmin chartplotter is mandatory to ensure compatibility and fully exploit the system's capabilities.

Operationally, it is important to note that LVS34 transducer performance degrades above 19 km/h (12 mi/h), and drag may affect the boat's course-keeping. These limitations must be considered during high-speed navigation. Finally, while LiveScope Plus provides exceptional visualization, it is essential to remember that sonar information is provided solely as situational awareness aid and must not replace the helmsman's vigilance to avoid collisions or groundings.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sistema LiveScope™ Plus su sonde GLS 10™ ir LVS34

1.863,56€

1.863,56€ ~~2.199,00€~~

Frequently asked questions

Need help? Contact us

What is the Garmin LiveScope™ Plus system with GLS 10™ transducer and LVS34?

The Garmin LiveScope™ Plus system is a cutting-edge real-time sonar visualization solution. It consists of the GLS 10™ sonar module and the LVS34 transducer. This setup is designed to provide dynamic and instant situational awareness underwater, offering an immediate perspective for navigation and object or structure detection, unlike traditional sonar systems that may present static views or delayed scans.

What are the main components included in the LiveScope™ Plus system?

The LiveScope™ Plus system comes with two main components:

The GLS 10™ sonar module, which is the sonar processing unit.The LVS34 transducer, which is the LiveScope™ Plus transducer.These two elements work together to provide real-time sonar images.

Which tools are required to install the LiveScope™ Plus LVS34 transom-mount kit?

To install the LiveScope™ Plus LVS34 transom-mount kit, you will need the following tools:

A drill and drill bits.A 17 mm (5/8 in) wrench.A torque wrench with a 17 mm (5/8 in) socket.Masking tape.A #2 Phillips screwdriver.Marine sealant.

Are there any specific considerations for mounting the LiveScope™ Plus transducer on the transom?

Yes, several considerations are important for optimal installation:

The transducer must not be installed in the propeller wash path. For vessels with outboard motors and sterndrives, it is recommended to install the transducer on the side of the propeller’s downwash, typically starboard side.Choose a location where the transducer will not be subjected to vibration during launch, towing, or storage.Avoid installing the transducer behind strakes, struts, fittings, water outlets, through-hull transducers, or anything that could create air bubbles or cause turbulent water, as this can interfere with the sonar beam.Install the transducer as close as possible to the boat’s centerline.On twin-propulsion vessels, install the transducer between the propulsors if possible.

How to adjust and secure the LiveScope™ Plus transducer after mounting it on the transom?

After connecting the transducer to the mount and the mount to the transom, you must adjust its angle and depth:

Adjust the transducer angle so that the element is parallel to the waterline.Using a M5 hex key, tighten the screw that secures the transducer to the mount.Adjust the height of the transducer mount on the transom so that the transducer is submerged when the boat is in the water.Using a #2 Phillips screwdriver, tighten the five screws that secure the mount to the transom.Test the transducer angle and depth and make any necessary adjustments.

Is it necessary to update the software of my Garmin chartplotter when installing the LiveScope™ Plus system?

Yes, it is mandatory to update the software of your Garmin chartplotter when installing the LiveScope™ Plus system. This update ensures compatibility and optimal performance of the device.

Are damages to the LiveScope™ Plus transducer caused by an underwater impact covered by the warranty?

No, damages to the transducer, its mounting bracket, or the boat caused by an impact with an underwater object are not covered by the warranty. The transom mount bracket is not designed to detach upon impact, and striking an underwater object can damage the equipment.