Echolotas EAGLE 7" 83/200 HDI

HDI stands for Hybrid Dual Imaging. This is a technology that combines two types of sonar in a single transducer:

CHIRP sonar: Provides excellent target separation, allowing clear distinction between individual fish or fish close to structures.
DownScan Imaging™: Delivers detailed, near-photographic images of structures and the seabed directly beneath your boat.

Yes, the Eagle 7 fishfinder has an IPX7 waterproof rating. This means it is protected against temporary immersion in water up to 1 meter deep for 30 minutes.

The Eagle 7 fishfinder operates on a 12 V DC power supply. The accepted voltage range is 10.8 V to 18 V DC.

A 3 A fuse is recommended to protect the electrical installation of your Eagle 7 fishfinder.

The Eagle 7 is equipped with a single memory card reader. It is compatible with microSD cards up to 32 GB.

The Eagle 7's maximum electrical consumption is 6.6 W, which corresponds to a current of 550 mA at 12 V DC.

The Eagle 7 fishfinder is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F).

Yes, the Eagle 7’s single transducer port is also compatible with Lowrance SplitShot™ and TripleShot™ transducers, giving you upgrade options.

The screen alone (without the mounting bracket or transducer) weighs 0.67 kg (1.48 lb).

To take a screenshot on the Eagle 7, simply press the Pages button and the Power button simultaneously.

To clean the housing, use warm water with a small amount of dish soap or mild detergent. It is important not to use a high-pressure water jet for cleaning.

The HDI 83/200 depth sounder uses multiple frequencies for its different technologies:

CHIRP Sonar: 83 kHz (CHIRP Medium) and 200 kHz (CHIRP High). DownScan Imaging™: 455 kHz and 800 kHz.

No, the Eagle series is designed to operate as a standalone unit. It does not include networking features (such as Ethernet or NMEA 2000) found in higher-end series like the Lowrance Elite FS or HDS.

Yes, you can record depth sounder data (sonar logs) to a microSD card inserted in the device. The files are saved in .sl2 format, allowing you to review them later or use them to create custom bathymetric charts.

To instantly create a waypoint at your current position in an emergency (MOB - Man Overboard), press the Zoom in (+) and Zoom out (-) buttons simultaneously.

The Eagle 7 fishfinder comes with a basic worldwide chart plot. It is also compatible with more detailed C-MAP® DISCOVER™ and Navionics® marine charts for enhanced navigation.

Yes, a flush-mount installation is possible. A specific gasket kit for flush-mounting in the dashboard is available separately (part number 000-16254-001).

Yes, the Eagle 7's sounder port is fully compatible with the Lowrance TripleShot™ transducer, which combines CHIRP, SideScan, and DownScan Imaging™ technologies.

Absolutely. With its HDI 83/200 dual-frequency transducer and mapping features, the Eagle 7 fishfinder is perfectly suited for both freshwater fishing (lakes, rivers) and coastal sea fishing.

The Lowrance Eagle 7 fishfinder features a 7-inch color display. It provides a resolution of 800 x 480 pixels, ensuring good clarity for sonar and chart data.

Additionally, the display has wide viewing angles of 85° in all directions (up, down, left, and right), ensuring excellent readability from various positions aboard your vessel.