DC-DC keitiklis Mastervolt DC Master 24/12-24 (izoliuotas)

This converter provides a nominal output voltage of 13.6 V. It can deliver a continuous current of 24 A and a maximum current of 30 A for 2-minute intervals. The nominal output power is 326 W, with a maximum power of 408 W.

Galvanic isolation is a key feature of this converter, as it provides electrical separation between the input and output circuits. This isolation is important because it eliminates ground loops and suppresses electromagnetic interference, making it ideal for protecting sensitive electronic equipment such as chartplotters, VHF radios, or autopilots.

The dimensions of the Mastervolt DC Master 24/12-24 (Isolated) converter are 217 mm (height) x 87 mm (width) x 50 mm (depth). Its weight is 0.785 kg.

The idle consumption of this converter is very low, less than 15 mA at the nominal input voltage. This helps optimize the autonomy of your battery bank.

Yes, this converter is stabilized, meaning it maintains a constant output voltage even if the input voltage or load varies within the specified limits.

The Mastervolt DC Master 24/12-24 (Isolated) converter has an IP53 protection rating. This means it is protected against dust (limited infiltration) and water splashes.

The isolated models, such as the DC Master 24/12-24 (Isolated), provide galvanic isolation between the input and output, offering additional contact protection and eliminating interference for sensitive equipment. They are also compatible with installations with positive or negative ground, providing greater flexibility compared to non-isolated models, which are primarily suited for negative-ground installations.

This converter is compatible with battery systems having a nominal voltage of 24 V. The full input voltage range is 20 to 32 V DC.

Yes, thanks to its galvanic isolation which eliminates electromagnetic interference and ground loops, this converter is ideal for powering sensitive 12V equipment such as chartplotters, VHF radios, autopilots and other electronic navigation devices.

Yes, this DC Master (Isolated) converter is compatible with both negative-ground and positive-ground installations, providing flexible wiring options for various applications.

Yes, this inverter has a two-minute overload capacity, allowing it to deliver up to 30 A (for 2 minutes) for brief current spikes, which is ideal for devices such as autopilot motors or compressors that may have startup power surges.

A cool, dry, and well-ventilated location is recommended for installing the converter to ensure proper operation and longevity.

The converter is mounted using the supplied mounting bracket. Mark the hole positions with the bracket, drill 3.5 mm holes, secure the bracket with the supplied screws, then click the converter into the mounting bracket.

It is imperative to connect the two input wires of the converter first, and only then connect the output wires. Ensure the power source is switched off before making any connections.

Yes, it is essential to integrate a fuse in the positive wiring, placing it as close as possible to the battery to protect the installation.

Before installation, ensure the power source output is turned off and no devices are connected to the batteries. This prevents any hazardous situations during the work.