AC Master 24/1000 (230V) keitiklis

The AC Master 24/1000 is a high-frequency device that converts 24V DC from your battery bank into 230V AC. It is ideal for powering household equipment during navigation or in semi-professional applications.

It delivers a continuous power output of 1000 W (even at an ambient temperature of 40 °C). It can also handle significant load spikes with a peak power of up to 2000 W for 3 seconds, ideal for starting engines or compressors.

Yes, it uses pure sine wave technology. This guarantees exceptional power quality with harmonic distortion below 5 %, essential for the safe operation of sensitive electronic equipment.

To ensure optimal operation and preserve the lifespan of your installation, Mastervolt recommends using a 24V battery bank with a capacity of 65 Ah or greater.

To safely connect the converter to your 24V battery bank and avoid voltage drops, you must use a minimum cable section of 16 mm².

A 63 A DC fuse (slow-blow type) is strongly recommended to protect the power circuit between the battery and your converter.

Cooling is provided by a variable-speed fan controlled by temperature and load. It remains quiet at low power usage and activates only when the unit heats up or is heavily loaded.

This model is designed to be compact and lightweight. It measures 200 x 372 x 83 mm (Height x Width x Depth) and weighs only 3.3 kg, making it easy to install on board.

Yes, this converter can be integrated into a MasterBus system. However, this requires the addition of a MasterBus AC Master Interface (sold separately) to interface with the network.

Thanks to its automatic energy-saving system, standby consumption is very low:

ON mode (no load): less than 0.8 AEnergy-saving mode: less than 0.05 A

The device integrates multiple automatic safety features to protect your installation:

Overheating and overloadShort circuitsBattery voltage too high or too lowPolarity reversal (protected by a fuse)

The device has an IP21 protection rating. It is not waterproof and must be installed in a dry, well-ventilated location, protected from direct water spray.

To ensure optimal cooling and comply with the IP21 protection rating, the manufacturer recommends horizontal mounting on a solid bulkhead.

To protect your 24V batteries from destructive deep discharges, the converter automatically shuts off if the voltage drops to 21 V. It will restart automatically when the voltage rises back to 25 V.

Yes, it is designed to operate within an ambient temperature range of -20 °C to 60 °C. Note, however, that the maximum available power gradually decreases if the ambient temperature exceeds 40 °C.

The standard model (reference 28021000) is equipped with a standard European socket (Schuko), allowing you to plug in most of your household appliances directly and easily.

Continuous power (1000 W) is the load the device can supply indefinitely without overheating. Peak power (up to 2000 W) is a brief energy reserve (a few seconds) to handle the startup surge of demanding appliances.

Yes. Thanks to its pure sine wave technology and full galvanic isolation between input and output, it delivers power of a quality equivalent to that of the mains supply, ideal for computers, televisions, and navigation equipment.

Yes, there is a remote control option via a switch that allows you to turn the converter on or off immediately, along with all connected equipment, without needing direct access to the device.

This converter has an excellent energy efficiency of 94 %. This optimizes the use of your battery bank by minimizing energy losses as heat.