MasterBus 0,5 m kabelis

This cable is designed to connect and enable communication between Mastervolt devices (battery chargers, inverters, energy monitors) within your onboard power network using the CAN-bus communication protocol.

No, the MasterBus cable is specifically designed for Mastervolt's proprietary network. It is intended to connect exclusively to devices compatible with the MasterBus ecosystem.

The connection is made in a daisy-chain configuration. Simply connect one device's cable to the next using the standardized MasterBus ports on your equipment.

Yes, as with any MasterBus network, both ends of your device chain must be terminated with a terminator resistor (MasterBus Terminator), regardless of the cable length between devices.

Yes. This 0.5m cable is specifically recommended for direct bridging between very close components, such as a MasterShunt and a Mastervolt Lithium-Ion battery.

The cable itself uses the Mastervolt-specific CAN-bus protocol. To connect your MasterBus network to an NMEA 2000 network, you will need a specific interface (MasterBus NMEA 2000 Interface) in addition to this cable.

Yes, this cable is designed to provide optimal durability in demanding marine and mobile environments, ensuring a reliable connection despite vibrations and harsh onboard conditions.

This MasterBus cable strictly complies with the RoHS directive (2011/65/EU) and the NEN-EN-IEC 63000:2018 design standard regarding the restriction of hazardous substances in electrical equipment.

The MasterBus 0.5-meter cable is extremely lightweight, with a total packaged weight of only 28 grams (0.028 kg).

No specific tools are required. The connectors snap directly and easily into the MasterBus ports of your devices, following a plug-and-play system.

Although the cable is designed to minimize interference, it is still recommended during installation to physically separate communication cables from high-power cables to ensure optimal data signal.

The MasterBus network transmits both communication data and a low power supply. This allows small control interfaces or displays to be powered directly via the communication cable.

A MasterBus cable has two ends and connects exactly two adjacent devices within your network chain.

You can connect all Mastervolt devices in the MasterBus ecosystem equipped with MasterBus ports: battery chargers, inverters, combined systems, energy monitors, shunts, and various control interfaces.

Yes, the cable is ready to use. It comes with high-quality connectors already fitted and secured at both ends.

Daisy-chaining means that devices are connected one after another. This cable links device A to device B, then another cable links device B to device C, forming a continuous communication chain.

Yes. Its short 50 cm length is perfectly suited to neatly connect two network interfaces or Mastervolt modules mounted side by side on a DIN rail in your electrical panel.

The cable uses the CAN-bus communication protocol, which forms the reliable and fast foundation of the MasterBus system for power system synchronization.