NMEA 2000 nugaros kabelis 10 m

This NMEA 2000 backbone cable measures precisely 10 meters in length.

Yes, this cable is fully compatible with all NMEA2000 certified devices, including those from brands like Garmin or Raymarine. It uses standard Micro-C connectors.

It is labeled "low-loss" because it uses an 18 AWG conductor, thicker than standard cables. This minimizes voltage drop over long distances, ensuring stable power supply and data signal for all devices connected to the network.

No, this cable is a backbone cable designed to build or extend the backbone of your network. To connect a device, you must use a T-connector on the backbone, then a drop cable between the T-connector and the device.

This cable is fitted with standard NMEA2000 Micro-C connectors at each end, ensuring a secure and watertight connection with other network components.

Yes, absolutely. Navico is the parent company of Simrad, Lowrance, and B&G, so this cable is designed for perfect compatibility with all their NMEA 2000 equipment.

Cutting and splicing a NMEA2000 cable is strongly discouraged. This could compromise signal integrity, waterproofing, and overall reliability of your navigation network.

The backbone cable, or "backbone", is the communication and power backbone of the NMEA2000 network. All devices (displays, transducers, GPS antennas, etc.) connect to this main cable via T-connectors.

Yes, provided your existing network is a genuine NMEA 2000 backbone using Micro-C connectors, you can use this Navico cable to replace or extend a backbone segment without any compatibility issues.

Yes, this cable is specifically designed for marine environments. The connectors and the cable itself are robust and designed to withstand vibration, moisture, and spray.

No, no specific tools are required. Micro-C connectors are hand-tightened for a simple, fast, and secure connection.

Yes, in compliance with the NMEA2000 standard, this cable carries both digital data between devices and the 12V electrical power required to operate most sensors and small displays on the network.

Yes, you can connect multiple backbone cables end-to-end to extend the length of your network. Using this low-loss cable is in fact recommended for long backbones to maintain signal quality.

No, this cable is not compatible with an NMEA 0183 network. The protocols, connectors, and wiring are completely different. To connect NMEA 0183 devices to an NMEA 2000 network, a specific adapter or gateway is required.

The packaging contains a single Navico-branded NMEA 2000 backbone cable, 10 meters in length.

Using a single 10-meter cable reduces the number of connection points on your backbone. Fewer connections mean fewer risks of failures, signal loss, or waterproofing issues, improving the overall reliability of your installation.

To connect this cable to a Raymarine SeaTalkNG network, you will need a specific adapter cable (SeaTalkNG to NMEA2000 Micro-C). While the protocols are compatible, the connectors are physically different.

This cable is an official Navico product, known for its high-quality marine electronic equipment.

This product is covered by Navico's standard manufacturer warranty. It typically covers manufacturing and material defects under normal use conditions.

Yes, although robust, the NMEA 2000 cable is designed to be sufficiently flexible to be routed through boat bulkheads and technical conduits.