8 m ilgio RealVision 3D zondo kabelio jungiamasis laidas

This 8-meter extension is specifically designed to extend the cable length of your Raymarine RealVision 3D transducer. It allows greater flexibility in positioning the transducer on your vessel, particularly when the distance between the transducer and the multifunction display exceeds the standard cable length.

The Raymarine A80477 extension cable is 8 meters long.

No. This extension cable is specifically calibrated by Raymarine to maintain the integrity of the complex signal required by RealVision 3D transducers. It ensures lossless data transmission, guaranteeing optimal operation of features such as 3D imaging, DownVision, SideVision, and high-frequency CHIRP sonar.

Yes, this extension is designed with a robust and watertight connection, making it perfectly suited to the marine environment.

The A80477 extension is a passive component that is inserted between the RealVision 3D transducer and the Raymarine processing unit or multifunction display.

No, this extension is specifically designed for Raymarine RealVision 3D transducer cables. It is not compatible with traditional 2D transducers (such as conventional CHIRP or standalone DownVision) because it is calibrated for the complex signal of RealVision 3D transducers.

No, this extension is plug-and-play. No additional software configuration is required once it is connected.

The A80477 extension integrates directly and seamlessly with Raymarine RealVision 3D sounder systems. It connects simply between the RealVision 3D transducer cable and the corresponding input on your multifunction display or compatible sounder module.

Using the Raymarine A80477 extension ensures that imaging and fish detection performance is not compromised. Unlike generic solutions, this extension is specifically calibrated to maintain the integrity of the complex signal required by RealVision 3D transducers, thereby ensuring the proper operation of advanced features.

This extension cable is designed to extend the cables of RealVision 3D transducers. It must be used with a complete RealVision 3D system, including a RealVision 3D transducer and a Raymarine multifunction display compatible with RealVision 3D technology.

Yes, the A80477 extension cable is compatible with all Raymarine RealVision 3D transducers. It is designed to integrate seamlessly with these systems.

The model number or SKU of this extension is A80477.

It is strongly discouraged to cut and splice the cables of a depth sounder or their extensions. This can compromise the integrity of the complex signal and the watertightness of the system, leading to performance loss or malfunctions. It is recommended to use the appropriate cable length or to manage any excess cable in a secure manner.

No, this extension is only required if the standard cable length of your RealVision 3D transducer is insufficient to reach the desired location of your multifunction display or sounder module. If your current cable is already long enough, you do not need this extension.

The A80477 extension uses Raymarine-specific connectors, designed for RealVision 3D transducers, ensuring a robust and watertight connection compliant with the brand's marine standards.

No, this extension is exclusively designed for transducers and systems using Raymarine's RealVision 3D technology. It is not compatible with earlier generations of transducers or different sonar technologies.

To ensure you buy the correct extension cable, verify that your fishfinder is a Raymarine RealVision 3D model. The part number A80477 is specifically designed for this range of fishfinders.

During installation, ensure the connectors are clean, dry, and properly aligned before firmly plugging them in. Do not force the connection and make sure the sealing gaskets are in place to ensure water protection. Avoid tight bend radii for the cable.

Yes, if the distance between your RealVision 3D transducer and your RealVision 3D external fishfinder module (such as an RVX module) or your RealVision 3D-compatible multifunction display exceeds the length of the standard transducer cable, this 8-metre extension cable will be required to establish the connection.

This extension is designed to be inserted between and extend the original cable of the RealVision 3D transducer. It prevents the need for splices or excessive strain on the original cable, which could damage the transducer or compromise signal quality.