Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 4%

Raymarine

E70340

Bronzinė skersinė zondinė srovė su 12° kūgio spinduliu HIGH CHIRP CPT-S, 10 m kabelis

La sonde bronze traversante RAYMARINE E70340 CPT-S offre une détection sous-marine précise grâce à son faisceau conique HIGH CHIRP de 12°. Conçue pour une durabilité accrue en milieu marin, elle est idéale pour les MFD Raymarine compatibles nécessitant un sonar traditionnel performant. La sonde est fournie avec un câble de 10m intégré.

Kampas: 12 laipsniai

0 laipsnių 12 laipsniai 20 laipsnių

Public priceGet pro pricing

308,58€

308,58€ ~~324,00€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Echoloto technologijos	CHIRP Haute Fréquence
Sonaro dažniai	170-230
Veikimo temperatūra	-10 à +50
Didžiausias nuskaitomo gylio riba	274.0
Sondos medžiaga	Bronze
Sonaro jungties tipas	Raymarine CPT-S
Kabelio ilgis	10.0
Su derinami displėjai	Raymarine Axiom, Element, Dragonfly (avec adaptateur si nécessaire)
Produkto gylis	100
IP klasifikacija	IPX6/IPX7
Belaidis ryšys	Non
Montavimo tipas	Traversante
Sertifikatai	2013/53/EU,EN ISO 8846:2017
Apšvietimo kampas	25
CHIRP aukštoji dažniuotė	170-230
Įmontuotas greičio jutiklis	Non
Išleidimo metai	2017.0
Garantija	2.0

Detailed description

RAYMARINE E70340 bronzinė skersinė zondinė srovė skirta povandeninio detekcijos sistemoms CHIRP. Šis CPT-S modelis yra skersinė bronzinė zondinė srovė su 12° kūgio spinduliu HIGH CHIRP, kompensuojanti laivo korpuso V formą. Ją komplektuoja 10 m ilgio integruotas kabelis, palengvinantis įrengimą įvairiems laivams.

Precizinė CHIRP Sonaro Technologija

Įtraukta į Raymarine CPT-S seriją, ši zondinė srovė naudoja HIGH CHIRP technologiją, kad suteiktų detalius sonaro atsakymus ir pagerintų taikinių atskyrimą. Skirtingai nuo DownVision sistemų, kurios siūlo foto realistinį dugno vaizdą, šis modelis koncentruojasi į tradicinį kūginį spindulį, optimizuotą žuvų detekcijai ir tiksliai dugno sekimui įvairiuose gyliuose. Jos bronzinė konstrukcija leidžia laikytis kaip patvaresnė alternatyva plastikinėms versijoms (pvz., A80447 su tuo pačiu 12° kūgio spinduliu), ypač tinkama griežtoms jūrinėms sąlygoms ir korpusams iš medžio ar stiklo pluošto.

Įrengimas ir Atitikimas

E70340 zondinė srovė skirta skersiniam įrengimui, reikalaujančiam korpuso perforavimo. 12° kampas specialiai parinktas korpusams su vidutiniu deadrise, užtikrinant, kad sonaro spindulys nukreiptas vertikaliai į dugną. Būtina neardyti zondinės srovės kabelio, nes tai reikšmingai pablogintų sonaro veikimą, anuliuotų CE Europos ženklą ir panaikintų garantiją. Šis produktas atitinka harmonizuotas normas 2013/53/EU ir EN ISO 8846:2017, garantuojančias jo patikimumą ir saugumą jūrinėje aplinkoje. Siekiant optimalios veiklos, zondinė srovė turi būti naudojama tik vandenyje, kad išvengti perkaitimo.

Documentation

Type	Nom
	EN - Plan technique - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	FR - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Expert review

Pol CONIN

Skaitmeninės veiklos vadovas

« Technical analysis of the Raymarine CPT-S bronze 12° CHIRP transducer »

The Raymarine CPT-S E70340 transducer is a technically sound choice for recreational boaters and anglers seeking a reliable and robust CHIRP sonar solution. Unlike RealVision 3D multi-element sensors that provide sophisticated imaging, this model focuses on the performance of a dedicated HIGH CHIRP conical beam. Its bronze construction is a major advantage for durability, outperforming plastic versions in harsh marine environments, particularly for boats kept afloat year-round or in saltwater. It is especially well-suited to wooden or fiberglass hulls, where a through-hull installation is preferred to eliminate turbulence.

The 12° beam angle of the transducer is specifically designed to compensate for the deadrise of hulls with moderate angles, ensuring the sonar beam is perpendicular to the seabed for optimal readings. It is essential to verify the compatibility of this angle with your hull design before installation to avoid beam tilt that would degrade performance. Although the CPT-S series is an earlier generation compared to the newer RealVision systems, it remains relevant for compatible Raymarine MFDs (such as Dragonfly models or certain A, eS, and gS series) requiring a traditional CHIRP sonar for precise fish detection and bathymetry.

Through-hull installation, while more complex than a transom-mount setup, delivers superior hydrodynamic performance and better transducer protection. It requires careful attention to hull drilling and sealing to maintain the vessel's integrity. This transducer does not provide DownVision or SideVision imaging, so it should be prioritized if your primary need is a high-performance traditional CHIRP sonar without advanced imaging features, or if you are complementing an existing system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Bronzinė skersinė zondinė srovė su 12° kūgio spinduliu HIGH CHIRP CPT-S, 10 m kabelis

308,58€

308,58€ ~~324,00€~~

Frequently asked questions

Need help? Contact us

What is HIGH CHIRP technology and what is the purpose of the conical beam of this depth sounder?

The HIGH CHIRP technology used by this Raymarine CPT-S depth sounder delivers highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional conical beam of this depth sounder is optimized for precise fish detection and bottom tracking across various depths.

Why does this through-hull transducer have a 12° angle?

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel's hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, especially for hulls with moderate deadrise.

What type of installation is required for this Raymarine transducer?

This transducer is a through-hull model, meaning it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper installation and to maintain the enhanced warranty benefits.

Can I cut the depth sounder cable if its 10-meter length is excessive for my sailboat?

No, it is imperative not to cut the depth sounder cable. Cutting the cable will significantly reduce the fishfinder’s performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

Which Raymarine devices is this CPT-S transducer compatible with?

This CPT-S transducer is designed to be compatible with Raymarine CHIRP sonar systems. It generally works with Raymarine multifunction displays (MFD) from the Axiom and Element series, as well as with certain Dragonfly models that support CPT-S conical-beam transducers.

Why is this transducer made of bronze rather than plastic?

This transducer is made of bronze to provide enhanced durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

How should I maintain and clean my depth sounder to ensure its performance?

To maintain your depth sounder's performance, follow these recommendations:

Apply a thin coat of water-based antifouling paint to the depth sounder to prevent marine growth buildup. Reapply every 6 months or at the start of each season.

Clean the depth sounder with a soft cloth and mild household detergent.

For stubborn grime, use a scrubbing pad such as Scotch Brite™, taking care not to scratch the face of the depth sounder.

Caution: Never use ketone-based paint, spray paint, or harsh cleaning solvents like acetone, as these will damage the depth sounder.

Which compliance standards does this Raymarine transducer meet?

This Raymarine E70340 transducer complies with European harmonized standards. It meets Directive 2013/53/EU for marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.