CPT-S jutiklio montavimo rinkinys

The Raymarine R70496 CPT-S transducer mounting kit is designed for installing CHIRP CPT-S transducers on the transom of your vessel. This kit provides a secure mount and allows precise adjustment of the transducer position, which is critical for optimizing CHIRP cone sonar signal quality.

This kit is specifically designed for transducers in the Raymarine CPT-S range. These transducers typically equip chartplotters such as Raymarine Dragonfly models or multifunction displays (MFD) compatible with LightHouse II software (version 16) from 2016.

To ensure watertightness during installation, you must use a high-quality marine-grade polyurethane sealant with neutral curing. It is critical not to use sealants containing acetate or silicone, as they could potentially damage the plastics of the transducer and the mounting kit.

Yes, a mounting template is provided with the kit. It simplifies drilling the mounting holes for the bracket and the adjustment slots, enabling precise positioning for clear and reliable sonar readings.

After the initial assembly, it is recommended to perform a water test. This step allows you to finalize the angle and depth of the transducer by adjusting its position in the adjustment slots. The locking hole should only be drilled and the final screw tightened once the optimal position is found and validated, ensuring optimal performance and eliminating turbulence.

Yes, cutting the depth sounder cable significantly reduces the fishfinder's performance and voids the product warranty. Additionally, it invalidates the European CE mark. If the cable is damaged, it must be replaced and cannot be repaired.

No, the depth sounder must be tested and used only when fully submerged in water. Operating the depth sounder out of the water may cause overheating and damage the device.

CPT-S transducers use CHIRP technology with a conical beam. This technology provides target separation and seabed resolution suited to navigation and coastal fishing.