Paketas 2 nerūdijančio plieno skersinės 20° zondu RVM-420, tiesioginis sujungimas su AXIOM2 ir RVM1600 (2 x 2 m, kabelis Y ir 8 m ilgio prailginimas)

The Raymarine RVM-420 pack (reference T70544) is a complete solution including two stainless steel through-hull transducers, specifically designed for hulls with a deadrise angle of 16° to 24°. It integrates RealVision 3D, DownVision, SideVision, and high-frequency CHIRP technologies for detailed sonar imaging. This pack is intended for port and starboard installation for optimal coverage.

Raymarine RVM-420 sounders integrate several advanced sonar technologies for comprehensive underwater visualization:

RealVision 3D: Provides a three-dimensional view of the seabed, structures, and fish.DownVision: Delivers a clear, photographic image of the seabed and structures beneath the boat.SideVision: Enables visualization of structures and fish to the sides of the vessel.High-frequency CHIRP: Enhances target separation and image resolution.

The RVM-420 through-hull transducers are made of stainless steel, ensuring secure mounting and increased durability in the marine environment.

The RVM-420 transducers have a 20° angle. They are specifically designed for boat hulls with a deadrise angle between 16° and 24°. This integrated angle ensures optimal performance without requiring a fairing block.

The T70544 pack includes the following:

Two RVM-420 stainless steel through-hull transducers with a 20° angle. Two 2-metre transducer cables each. A Y-cable to connect both transducers to a single input. An 8-metre extension cable.

The RVM-420 transducers are directly compatible with Raymarine AXIOM2 multifunction displays. They are also compatible with other models in the Axiom range, such as AXIOM, AXIOM+, AXIOM Pro, AXIOM XL, and AXIOM 2 XL displays, provided they are equipped with the appropriate RealVision MAX sounder module or have integrated RealVision MAX capability.

Yes, these transducers are designed for direct compatibility with Raymarine RVM1600 fishfinder modules, as well as Axiom2 displays that integrate RealVision MAX technology.

The RVM-420 depth sounders are through-hull transducers. This means they are installed by drilling through the boat's hull so the transducer element is in direct contact with the water, ensuring optimal sonar performance.

Yes, installing the RVM-420 through-hull depth sounders requires drilling the hull of the vessel for each sounder. This process is essential for secure mounting and to ensure the transducer is correctly positioned to pick up sonar signals.

Yes, antifouling paint can be applied to RVM-420 transducers. It is recommended to follow the specific instructions from the antifouling paint manufacturer and Raymarine for reapplying antifouling to avoid degrading the transducer's performance.

The pack includes two transducers (one for port and one for starboard) to provide improved and more comprehensive SideVision coverage on both sides of the boat. This setup is particularly beneficial for larger vessels or those seeking detailed side imaging over an extended area.

Yes, transducer positioning is critical for optimal performance. It is recommended to install them in an area where the water flow is smooth and free of turbulence, away from propellers, keels, through-hulls, or other transducers. Specific guidelines are provided in the installation manual for fiberglass cored hulls.

Yes, calibration is required after installation. The RVM-420 transducers require AHRS (Attitude and Heading Reference System) RealVision calibration to ensure 3D image accuracy and general transducer calibration for correct depth and imaging readings.

The RVM-420 transducer pack includes:

Two 2-metre transducer cables. A Y-cable to connect both transducers. An 8-metre extension cable. This provides sufficient combined cable length for many installation setups.

The RVM-420 transducers transmit a full range of sonar data to your compatible Raymarine display, including:

Detailed 3D images of the seabed and structures.DownVision views beneath the boat.SideVision views of the boat's sides.Precise depth data.Fish detection and identification.

Although the installation manual provides the exact list, installing through-hull transducers such as the RVM-420 typically requires basic hull-work tools, including:

An electric drill.Hole saws in various sizes for cutting through the hull.Measuring tools.Marine-grade sealant.Appropriate wrenches and screwdrivers for assembly.

Yes, it is strongly recommended to ensure your compatible Raymarine multifunction display (such as the AXIOM2) is running the latest LightHouse software version. Software updates ensure optimal compatibility and access to all RVM-420 transducer features.

The durability of RVM-420 probes is ensured by their stainless steel (316L) construction, a material known for its corrosion resistance and robustness in harsh marine environments. Additionally, their through-hull installation ensures secure and resistant mounting.

To maintain optimal performance of RVM-420 transducers, regular maintenance is recommended, including:

Routine checks to ensure no damage or obstructions are present.Cleaning the transducer surfaces to remove marine fouling.Reapplying antifouling paint if necessary, following the appropriate guidelines.

Yes, the Y-cable and extension cable included in the pack are designed specifically for RealVision sounders in the RVM-400 series, including RVM-420 models, and for their connection to compatible Raymarine sounder modules or multifunction displays. They ensure optimal connectivity and performance.