Plastikinė skydo tipo skenerio Raymarine TM150M 300W gylio/temperatūros

The Raymarine TM150M transducer (A80806) is a depth and water temperature sensing transducer. It uses CHIRP mid-band technology and is designed to be mounted on the transom of your vessel.

The TM150M transducer is primarily designed to measure depth below the hull and water temperature. These data are essential for navigation and optimizing fishing strategies.

The Raymarine TM150M transducer has a power output of 300W. This power is suitable for coastal navigation and fishing at moderate depths.

The TM150M depth sounder uses CHIRP mid-band technology. This technology emits a pulse over a wide frequency band to improve target discrimination and underwater image clarity.

The TM150M transducer operates in the 95 to 155 kHz frequency range. This is known as the CHIRP mid-band.

CHIRP mid-band technology offers several advantages:

Better target discrimination, making it easier to distinguish individual fish or schools of fish.Improved clarity of underwater images.Versatility across various fishing and sailing conditions, providing a good balance between signal penetration and resolution.

The TM150M transducer, with its 300W power and mid-frequency band (95–155 kHz), is optimized for coastal navigation and fishing at moderate depths. For very deep waters, CHIRP transducers with low frequency and higher power (e.g., 1 kW) are generally more suitable.

The TM150M transducer body is made of plastic. This makes it a lightweight and durable option for transom mounting.

No, the Raymarine TM150M transducer is a depth/temperature transducer only. It does not provide speed data.

A CHIRP mid-band sounder (such as the TM150M) transmits a pulse across a wide frequency range (e.g., 95-155 kHz) and processes the echoes to produce a more detailed image. A fixed-frequency sounder transmits and receives on a single specific frequency (e.g., 50 kHz or 200 kHz), offering less detail and target discrimination compared to CHIRP.

Yes, the TM150M transducer is supplied with an integrated cable for connection to a compatible Raymarine multifunction display or a sounder module.

The TM150M transducer is recommended for moderate-sized recreational vessels such as rigid inflatables, sport fishing boats, or small cruisers. Its transom-mount design and 300W power output make it ideal for coastal navigation and fishing at moderate depths where hull penetration is not desired or feasible.

The TM150M transducer is designed for mounting on the transom of the vessel. It is installed on the outside of the hull, at the rear of the boat.

Transom mounting is a popular option because:

It does not require drilling through the hull, simplifying installation.It is often easier to install than through-hull transducers.It allows adjusting the transducer angle to optimize performance.

Yes, the TM150M transducer is a plastic transom-mounted transducer, making it compatible with most hull types, including fiberglass, aluminum, or wooden hulls. The key is to find a location on the transom that ensures laminar water flow for optimal performance.

Installing the TM150M depth sounder requires common tools such as a drill, drill bits, a screwdriver, and marine sealant. It is recommended to carefully follow the instructions provided with the depth sounder for correct and secure installation.

Yes, to optimize performance, the depth sounder must be installed in an area where the water flow is as smooth as possible, away from turbulence generated by the propeller, keels, or other appendages. It should be placed slightly below the waterline and oriented correctly to ensure accurate readings.

The TM150M transducer is compatible with Raymarine multifunction displays (MFD) featuring integrated CHIRP technology, such as the Axiom or Element series. It can also be used with a compatible Raymarine external CHIRP sounder module, like the CP100, if your MFD does not have an integrated CHIRP sounder.

No, the Raymarine TM150M transducer is specifically designed for use with Raymarine fishfinder systems and multifunction displays. It is generally not compatible with devices from other manufacturers due to specific connectors and communication protocols.

This depends on your current Raymarine equipment. If your Raymarine multifunction display already has an integrated CHIRP depth sounder (as is the case for many Axiom or Element models), an additional depth sounder module is not required. If your MFD does not have this integrated feature, you will need an external compatible CHIRP depth sounder module (e.g., a Raymarine CP100) to use the TM150M transducer.