Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 12%

Raymarine

A80704

RVM-400 0° nerūdijančiojo plieno RealVision 3D skersinė sonda, tiesioginis prijungimas prie AXIOM2 ir RVM1600 (8 m kabelis)

La sonde traversante Raymarine RVM-400 en inox (0°) offre les technologies RealVision 3D, DownVision, SideVision et CHIRP pour une imagerie sous-marine complète. Conçue pour un branchement direct aux écrans AXIOM2 et aux modules RVM1600, elle assure une intégration simplifiée. Cette sonde fait partie de la série RVM-400, offrant une alternative pour les coques à faible inclinaison, tandis que les RVM-412 (12°) et RVM-420 (20°) sont disponibles pour des angles de varangue différents. Inclus: la sonde RVM-400 avec un câble de 8 m.

Public priceGet pro pricing

1.672,91€

1.672,91€ ~~1.914,00€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Echoloto technologijos	RealVision 3D, DownVision, SideVision, CHIRP haute fréquence
Sondos medžiaga	Inox
Sonaro jungties tipas	Connecteur RealVision 25 broches
Kabelio ilgis	8.0
Su derinami displėjai	Raymarine Axiom, Axiom+, Axiom 2 Pro RVM, Axiom Pro, Axiom XL, et modules sondeur RVM1600
Belaidis ryšys	Non
Montavimo tipas	Traversante
Sertifikatai	CE, FCC, RCM
CHIRP aukštoji dažniuotė	150-230
Garantija	2.0

Detailed description

Raymarine RVM-400 skersinė sonda siūlo RealVision 3D sonaro vaizdavimo sistemą suderinamiems navigacijos įrenginiams. Sukurta 0° kampu įrengti skersinei montuotei, ši nerūdijančiojo plieno sonda integruoja DownVision, SideVision, RealVision 3D technologijas bei aukšto dažnio CHIRP sonaro sistemą, teikiančią detalią povandeninę vaizdą. Ji tiesiogiai jungiasi prie Raymarine AXIOM2 daugiafunkcių ekranų ir RVM1600 sonaro modulių, supaprastindama tinklo integraciją.

Įterptos Sonaro Technologijos

RVM-400 sujungia kelias sonaro technologijas, užtikrinančias visapusišką dugno ir vandens stulpo apžvalgą. DownVision ir SideVision galimybės leidžia aptikti šonines ir vertikalias struktūras bei žuvis, o RealVision 3D technologija suteikia trimatį povandeninio pasaulio vaizdą. Aukšto dažnio CHIRP sonaras užtikrina geresnį taikinių atskyrimą ir vaizdo aiškumą nei fiksuoto dažnio sonarai. Ši sonda yra pagrindinis RVM-400 serijos elementas, į kurią taip pat įeina RVM-412 ir RVM-420 modeliai, skirtingi pagal kompensavimo kampus skirtingoms korpuso nuolydžiams.

Integracija ir Įrengimas

RVM-400 sukurta tiesioginiam prijungimui prie AXIOM2 ekranų ir RVM1600 sonaro modulių, todėl nereikia papildomų adapterių ir užtikrinama optimali suderinamybė. Pateiktas 8 m kabelis leidžia lengvai įrengti sondą daugumoje laivų. Skersinė nerūdijančiojo plieno įrengimo sistema užtikrina tvirtą tvirtinimą ir ilgaamžiškumą jūrinėje aplinkoje. Jei reikia ilgesnių kabelių, galimi RealVision kabelių prailginimo variantai, leidžiantys pasiekti didžiausią sujungimo atstumą.

Documentation

Type	Nom
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	FR - Manuel d'utilisation - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)
	EN - Plan technique - Sonde traversante RVM-400 0° Inox RealVision 3D, branchement direct AXIOM2 et RVM1600 (câble 8 m)

Expert review

Pol CONIN

Digital Manager

« Technical analysis of the Raymarine RVM-400 RealVision 3D through-hull transducer »

The Raymarine RVM-400 through-hull transducer is a technical solution for recreational boaters and anglers equipped with an AXIOM2 system or an RVM1600 module. Its main advantage lies in its direct integration, which minimizes potential failure points and simplifies wiring. Unlike solutions with external adapter housings, this direct connection ensures RealVision 3D data transmission without latency, essential for real-time detection of structures and fish schools.

The choice of a 0° stainless steel through-hull transducer is relevant for hulls with low deadrise angles. For boats with a more pronounced deadrise angle, the RVM-412 (12°) or RVM-420 (20°) models from the same series would be better suited to optimize beam quality and avoid air bubbles. The integrated engineering of the RVM-400 allows precise AHRS (Attitude and Heading Reference System) calibration, ensuring stable 3D imaging even in rough seas. This is a significant advantage for users seeking consistent and reliable visualization.

Installation requires precise hull drilling, but electrical connection is simplified thanks to the direct connector. It is crucial to follow placement guidelines to avoid interference and ensure optimal sonar performance. This transducer is particularly recommended for mid-sized boats seeking a high-performance sonar imaging solution without the complexity of a modular system with additional interface housings.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

RVM-400 0° nerūdijančiojo plieno RealVision 3D skersinė sonda, tiesioginis prijungimas prie AXIOM2 ir RVM1600 (8 m kabelis)

1.672,91€

1.672,91€ ~~1.914,00€~~

Frequently asked questions

Need help? Contact us

Which sonar technologies are integrated in the Raymarine RVM-400 transducer?

The Raymarine RVM-400 transducer integrates several advanced sonar technologies for comprehensive underwater vision:

DownVision: Provides a detailed view of the seabed directly beneath the boat.SideVision: Scans lateral areas to detect structures and fish on the sides.RealVision 3D: Offers a three-dimensional representation of the underwater world.High-frequency CHIRP sonar: Enhances target discrimination and image clarity.

What material is the RVM-400 transducer made of and what is its compensation angle?

The Raymarine RVM-400 transducer is made of stainless steel, ensuring durability and resistance in marine environments. It is designed for through-hull installation with a 0° compensation angle. This means it is ideal for hulls with a deadrise angle of 0° at the installation location.

What is the length of the cable supplied with the Raymarine RVM-400 transducer?

The Raymarine RVM-400 transducer comes with an integrated 8-meter (26.2-foot) cable. This length is designed to simplify the installation of the transducer on most vessels.

Which Raymarine multifunction displays directly integrate compatibility with the RVM-400 transducer?

The Raymarine RVM-400 transducer is designed for direct connection to Raymarine AXIOM2 multifunction displays. These displays integrate RealVision technology, which processes the transducer data without requiring an additional module.

Can the RVM-400 transducer be used with other Raymarine multifunction displays besides the Axiom²?

Yes, the RVM-400 transducer is compatible with other Raymarine multifunction displays in the Axiom series, including the Axiom 2 Pro, Axiom 2 XL, Axiom Pro, Axiom XL, and Axiom MFDs. For these models, the transducer must be connected to an RVM1600 sounder module.

What is the recommended installation type for the RVM-400 transducer?

The Raymarine RVM-400 transducer is a thru-hull type. This means it is installed by drilling a hole in the boat's hull, allowing the transducer element to be directly exposed to the water beneath the hull for optimal performance.

Should antifouling be applied to the RVM-400 depth sounder?

Yes, it is recommended to apply antifouling to the RVM-400 depth sounder to prevent marine growth buildup. It is important to use a water-based antifouling, specifically formulated for transducers, to avoid affecting the probe's performance. Avoid metal-based antifoulings that could interfere with the sonar signal.