SeaTalk kabelis 9 m

This SeaTalk Raymarine cable is 9 meters long. This length is ideal for extending and connecting instruments over significant distances aboard your boat.

This cable is designed for networks using Raymarine's SeaTalk I communication protocol. It is a proprietary Raymarine protocol, distinct from newer NMEA standards.

The Raymarine SeaTalk cable D287 is used for extending and connecting instruments within Raymarine proprietary SeaTalk I networks. It enables the necessary communication between various sensors and displays for navigation data display.

Yes, this is a genuine Raymarine cable, specifically model D287, designed for SeaTalk I systems.

The product reference for this 9-meter SeaTalk cable is D287.

Yes, as a component of Raymarine marine electronics, this cable is specifically designed for use in marine environments, providing resistance to typical conditions encountered at sea.

Yes, the SeaTalk I protocol uses a three-wire bus that includes power (12V), ground, and data wire. This cable therefore allows the transmission of both data and power to compatible instruments.

This cable is specifically compatible with Raymarine SeaTalk I systems. It provides direct interoperability with equipment from this generation, such as ST40, ST60, or ST80 instruments.

No, this cable is designed for Raymarine’s proprietary SeaTalk I networks. It is not directly compatible with NMEA 2000 systems, which use a different protocol and connectors. Specific gateways are required to bridge the two network types.

This cable is designed for SeaTalk I systems, which are older Raymarine architectures. Newer Raymarine devices typically use the NMEA 2000 protocol (or SeaTalkng, which is based on NMEA 2000). This cable will not be directly compatible with these newer devices without an adapter or a bridge.

No, this cable uses Raymarine SeaTalk I proprietary protocol and connectors. It is not designed to directly connect to instruments from other brands that do not use this specific protocol.

No, the D287 cable is designed for the SeaTalk I protocol. SeaTalkng is a newer protocol based on NMEA 2000 and uses different connectors. To connect SeaTalk I devices to a SeaTalkng network, a SeaTalk to SeaTalkng converter is required.

Installing a SeaTalk I cable involves connecting it to compatible instruments. If you have basic knowledge of marine wiring and follow Raymarine's installation diagrams, the task can be completed. Always ensure power is disconnected before handling.

Yes, it is possible to extend a SeaTalk network by connecting multiple SeaTalk I cables together. However, it is important to respect the maximum recommended lengths for the SeaTalk network to avoid any signal loss or performance degradation.

This cable uses Raymarine SeaTalk I proprietary connectors. These connectors are designed to ensure a reliable and watertight connection in a marine environment.

This cable can be installed to connect SeaTalk I instruments located at different positions on your sailboat, such as between the helm station and a chart table, or to link remote sensors. Its 9-meter length provides good flexibility for routing in various configurations.

During installation, ensure the cable is properly routed and secured to prevent physical damage. Also check that connections are clean and watertight to maintain signal integrity and prevent corrosion in the marine environment.

This cable is primarily intended for maintenance or upgrading existing SeaTalk I systems. For new installations, it is generally recommended to choose systems based on NMEA 2000 (or SeaTalkng), which are the current industry standards for interconnecting marine equipment.

To verify compatibility, you must identify the model of your Raymarine instruments. Instruments compatible with SeaTalk I often include the ST40, ST60, ST80 series, and other older devices. You can consult the user manual of your instruments or check for specific SeaTalk I ports (usually 3-pin connectors).

Yes, the D287 cable is an ideal solution for replacing a faulty SeaTalk I cable of 9 meters or less in an existing network. It will maintain communication between your compatible Raymarine instruments.