Capteur Trifonctions Sondeur/Loch et Température

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 13%

Raymarine

T910

Trifunkcinis jutiklis – Gylio matuoklis, greičio matuoklis ir temperatūros jutiklis

Le Raymarine T910 est un émetteur de coque conçu pour traiter les données de profondeur, vitesse et température d'un triducer, s'intégrant au système 12/24Vdc du bateau. Cette unité est essentielle pour centraliser et transmettre ces informations de navigation. Inclus : vis auto-foreuses et gabarit de montage.

Public priceGet pro pricing

217,46€

217,46€ ~~252,00€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Veikimo įtampa	12/24 V
Produkto plotis	47 mm
Produkto aukštis	52.5 mm
Produkto gylis	42.5
Magistralės suderinamumas	NMEA 2000
Laidinis tinklas	NMEA 2000
Montavimo tipas	Montage en surface
Savaiminio užsivėrimo vožtuvas	Non
Įmontuojamas	Non
Įrengimo vieta	Intérieur, au-dessus de la ligne de flottaison, ventilé
Greičio kalibravimas	Via système de navigation connecté
Temperatūros matavimas	Oui
Jautiklio išėjimo tipas	Numérique (NMEA 2000)
Jautiklio tipas	Interface de capteur multifonction

Detailed description

Raymarine T910 yra korpuso jutiklis, skirtas valdyti duomenis iš trifunkcinio jutiklio (triducer), kuris matuoja gylį, greitį ir temperatūrą. Šis įrenginys veikia kaip tarpininkas tarp triducer ir laivo navigacijos sistemos, apjungdamas šiuos tris esminius parametrus tiksliai stebėti. Jis suderinamas su 12/24V nuolatinės srovės bordo maitinimu ir gali būti maitinamas ir iš Raymarine saulės baterijos, kai nėra specializuotos energijos šaltinio.

T910 įrengimas ir jungtis

Raymarine T910 įrengimas reikalauja strategiškai tinkamo pozicionavimo laive. Įrenginys turi būti montuojamas vertikaliai, laidams išeinant į apačią, ir būtinai ne mažiau kaip 50 cm aukščiau plūdrumo linijos. Labai svarbu vengti tiesioginio kontakto su vandeniu ir rinktis gerai vėdinamą zoną, išskyrus hermetiškus sandarius skyrius. Montavimas atliekamas naudojant tris 2,5 mm skylutes ir pateiktas savisriegiančias varžtas, atkreipiant dėmesį, kad nebūtų per stipriai užveržta, siekiant išsaugoti korpuso vientisumą.

Detalės apie kabelių jungimą ir integraciją

Triducerio kabelių prijungimas prie Raymarine T910 turi būti atliktas laikantis konkrečios spalvų kodo sistemos. Triducerio atveju, ekranas turi būti prijungtas prie gylio jungties, o ne prie greičio jungties, siekiant išvengti trumpojo jungimo. Jei greičio jutiklis neturi integruoto temperatūros jutiklio, būtina sujungti rudą ir baltą laidus greičio jungtyje, kad būtų užtikrintas signalo tęstinumą. Silikono tepalo naudojimas ant jungčių rekomenduojamas jungties kokybei pagerinti, o kabelių atramos šalia jutiklio yra privalomos. Galiausiai, dangtelis turi būti tinkamai uždėtas, kad išorinės kabelių apvalkalai liktų viduje, užtikrinant visos kabelių sistemos apsaugą.

Documentation

Type	Nom
	EN - Gabarit de montage - Capteur Trifonctions Sondeur/Loch et Température
	EN - Notice d'installation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température

Expert review

Pol CONIN

Digital Manager

« Raymarine T910 interface: reliable management of triducer data »

The Raymarine T910 is a hull-mounted transmitter essential for vessels requiring reliable centralization of core navigation data: depth, speed, and temperature. This module is not the sensor itself but the electronic interface that receives and processes signals from an external triducer. Its practical value lies in converting raw sensor data into usable information for the onboard electronic system, often for integration into an NMEA or SeaTalkNG network, with NMEA output protocol specifically mentioned in the technical documentation.

Installing the T910 requires consideration. As a hull-mounted transmitter, it is installed inside the vessel, simplifying maintenance and avoiding additional hull penetrations compared to a through-hull transducer. However, this imposes specific constraints: vertical mounting, more than 50 cm above the waterline, and in a ventilated space away from direct moisture. These requirements are critical to ensure longevity and signal reliability. Installers must pay close attention to transducer wiring, including grounding the shield to the depth connector for triducers and bridging the brown and white terminals if the speed sensor lacks a temperature probe. These details are decisive for proper operation and system integrity.

This type of interface is particularly relevant for owners looking to modernize or improve the reliability of their navigation data acquisition without replacing all their sensors. It serves as a key component for converting and transmitting basic data, often a prerequisite for display on multifunction instruments or dedicated screens. It is not suitable for direct exposure to the elements or installation in sealed compartments that would prevent necessary ventilation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Trifunkcinis jutiklis – Gylio matuoklis, greičio matuoklis ir temperatūros jutiklis

217,46€

217,46€ ~~252,00€~~

Frequently asked questions

Need help? Contact us

What are the prerequisites for drilling the mounting holes for the T910?

You must drill three 2.5 mm holes. These holes are marked "B" on the mounting template provided with the device.

Which screws to use to mount the T910 and are there any precautions?

The T910 must be mounted using the self-tapping screws provided. It is critical not to overtighten the screws, as this could damage the housing molding.

How to connect the transducer cables to the T910?

Connecting the transducer cables to the Raymarine T910 must follow the specific color code indicated on the unit. It is also necessary to sleeve the shields to prevent short circuits.

How to connect the ground braid of a triducer to the T910?

For a triducer, the ground braid MUST be connected to the depth connector, not the speed connector. This prevents short circuits and ensures proper operation.

What should I do if my speed sensor does not have an integrated temperature probe?

If your speed sensor does not include a temperature probe, you must connect the brown and white wires of the speed connector. This connection ensures signal continuity.

Should a product be applied to the T910 connection terminals?

Yes, it is recommended to apply silicone grease to the connection terminals to optimize connection quality and protect it.

How to ensure proper cable management after connecting to the T910?

It is recommended to support the cables near the transmitter. Additionally, the unit's cover must be correctly positioned to keep the outer cable sheaths inside the transmitter, ensuring their secure attachment and protection.

How to check that the T910 cover is correctly installed?

Ensure the cover is properly seated and that it secures the outer sheaths of the cables inside the transmitter housing. This ensures connection protection and installation durability.

Is the T910 compatible with all types of transducers?

The Raymarine T910 is specifically designed to be used with a triducer (triple-function transducer) measuring depth, speed, and temperature. Its compatibility will therefore depend on the type of triducer you have.

Can the T910 be used with older transducers?

Yes, the T910 can potentially be used with older transducers. However, it is advisable to carefully check the connections, particularly if the speed sensor does not have an integrated temperature probe, in which case a link between the brown and white terminals of the speed connector will be required.

What types of data can the T910 process?

The T910 is designed to process and interface depth, speed (log), and temperature data. These three types of measurements are consolidated by the unit for your navigation system.

Can incorrect installation of the T910 affect the warranty?

Yes, failure to follow the installation instructions provided with the Raymarine T910 may void your warranty. It is therefore essential to strictly adhere to all guidelines for installation and wiring.