Blue Smart IP67 24/5(1) įkroviklis

The Blue Smart IP67 24/5(1) charger is fully encapsulated, making it waterproof, shock-resistant, and inflammable. Its housing is made of die-cast aluminum, and its electronic components are encapsulated in resin, ensuring IP67 protection.

Yes, the Blue Smart IP67 24/5(1) charger is compatible with Li-ion batteries. It uses a simplified 3-stage charging algorithm (bulk, absorption, float) specifically adapted for this battery type.

The charger uses a 5-stage adaptive charging algorithm for lead-acid batteries: bulk, absorption, reconditioning, float, and storage. This adaptive management automatically optimizes the charging process based on battery usage.

This charger offers 94 % efficiency. It minimizes heat dissipation, wasting three to four times less heat than industry standards. Once the battery is fully charged, its power consumption is less than one Watt.

Yes, the Blue Smart IP67 24/5(1) charger can initiate charging even if the battery has been discharged to zero volts. It can also reconnect a fully discharged Li-ion battery with an internal disconnect function.

Storage mode activates when the battery has not been discharged for 24 hours. It reduces float voltage to 26.4 V for a 24 V battery to minimize gas release and corrosion. Once per week, voltage is increased to absorption level to equalize the battery, preventing stratification and sulfation.

The charger is equipped with Bluetooth Smart technology. This allows monitoring of voltage and current, modifying settings, and wirelessly updating the charger via the VictronConnect app, available for smartphones, tablets, and computers.

Absorption: Normal: 28.8 V; High: 29.4 V; Li-ion: 28.4 VFloat: Normal: 27.6 V; High: 27.6 V; Li-ion: 27.0 VStorage: Normal: 26.4 V; High: 26.4 V; Li-ion: 27.0 V

Yes, the charger is protected against overheating. It can be used in hot environments, such as an engine room. The output current will be reduced if the temperature rises to 60 °C, but the charger will not fail.

The charger can operate with an AC input voltage range of 180 to 265 VAC and a frequency of 45 to 65 Hz. The nominal range is 220-240 VAC 50-60 Hz.

The charger must be installed in a well-ventilated area, close to the battery, but not directly above it due to potential corrosive gases.

Connect the negative terminal (black cable) to the negative terminal (–) of the battery. Connect the positive terminal (red cable) to the positive terminal (+) of the battery. Plug the AC power cable into the wall outlet. The charging cycle will then start.

Yes, the Blue Smart IP67 24/5(1) charger can be used as a power supply.

The charger has two LEDs for status indication:

The yellow LED indicates: bulk charge (fast blinking), absorption (slow blinking), float (steady), storage (off). The green LED indicates: power under voltage.

Yes, Blue Smart IP67 chargers are completely silent as they have no cooling fan or other moving parts.

The Blue Smart IP67 24/5(1) charger measures ambient temperature during the test phase and compensates for temperature during the charging process. No special settings for cold or hot environments are required.

The charger comes with a 1.5-metre black and red cable for battery connection, and a 1.5-metre cable with a CEE 7/7 plug for AC connection.

If connected with reversed polarity, the external ATO-type fuse will blow. It is important to check the polarity of the cables and the correct fuse rating before replacing it.

The Blue Smart IP67 24/5(1) charger has dimensions of 85 x 211 x 60 mm (height x width x depth) and weighs 1.8 kg.

The Victron Energy Blue Smart IP67 24/5(1) charger is designed as a robust and intelligent charging solution, particularly suited to demanding environments. Below are its main features and protections:

Full IP67 protection: Its die-cast aluminum housing and electronic components encapsulated in resin provide complete protection against water, oil, and dust. It is also protected against ignition.

Built-in Bluetooth Smart connectivity: Using integrated Bluetooth technology, you can monitor battery voltage and charge current, adjust settings, and update the charger via the VictronConnect app on your smartphone or tablet.

5-stage adaptive charging algorithm: Optimizes lead-acid battery lifespan with charge stages (bulk, absorption, conditioning, float, storage). The storage mode reduces float voltage and performs weekly equalization to prevent stratification and sulfation.

Li-ion compatibility: Uses a simplified 3-stage charging algorithm for Li-ion batteries.

Recovery of deeply discharged batteries: The charger can initiate charging even if the battery is fully discharged to 0 V and reconnect Li-ion batteries with internal disconnect function.

Overheat protection: Suitable for hot environments. Output current is reduced if temperature rises to 60 °C, but the charger will not fail.

High efficiency: With 94 % efficiency, it minimizes heat dissipation and reduces power consumption to less than 1 W once the battery is fully charged.

Can be used as a power supply: This charger can also function as a power supply.

Integrated protections: Protected against reverse polarity (via a fuse), output short circuits, and overheating.