GlobalLink 520

The Victron Energy GlobalLink 520 is a communication gateway designed for remote monitoring of your Victron systems. It connects your equipment to the Victron Remote Management (VRM) portal via a 4G LTE-M cellular connection, providing access to your installation data from anywhere in the world.

The GlobalLink 520 uses 4G LTE-M (LTE Cat-M1) technology. This technology is optimized for Internet of Things (IoT) applications, providing low power consumption and stable connectivity, even in mobile environments such as recreational vehicles.

Yes, the GlobalLink 520 supports LTE-M technology, which handles handover and roaming. This makes it ideal for use in moving vehicles, such as a motorhome, ensuring stable connectivity (with an optional external antenna for optimal performance).

The power consumption of the GlobalLink 520 is minimal and varies depending on configuration:

At 12 V: 20 mA (relay open) to 40 mA (relay closed)At 24 V: 10 mA (relay open) to 20 mA (relay closed)At 48 V: 5 mA (relay open) to 10 mA (relay closed)These values are given with Bluetooth enabled.

The external dimensions of the GlobalLink 520 (height x width x depth) are 123 x 67 x 23 mm.

Yes, the GlobalLink 520 is equipped with an internal antenna. It also features an SMA connector for optional external antenna installation, with a switch to select the antenna to use.

The GlobalLink 520 is designed to operate within a temperature range of -20 to +50 °C.

Yes, the GlobalLink 520 is equipped with two digital inputs that can be configured as pulse counters. It also includes a relay (1 x NO/NC) that can be remotely controlled, supporting up to 30VDC/2A or 125VAC/0.5A.

The GlobalLink 520 features two isolated VE.Direct ports, enabling wired connection of Victron devices such as:

BMV battery monitorsSmartShuntsPhoenix MPPT solar chargersPhoenix invertersPhoenix Smart IP43 chargers

Yes, the GlobalLink 520 supports connecting up to 10 additional Victron Smart products via Bluetooth Low Energy (BLE). This allows their data to be transmitted to the VRM portal.

Yes, the GlobalLink 520 supports RuuviTag and RuuviTag Pro sensors. These sensors connect via Bluetooth Low Energy (BLE) and can be configured through the VictronConnect app to transmit temperature, humidity, and barometric pressure data to the VRM portal.

Yes, the GlobalLink 520 is specifically designed to connect to the Victron Remote Management (VRM) portal. This free online portal allows you to monitor the current and historical status of your Victron system, including battery voltage, state of charge, power consumption, and energy production.

Yes, it is possible to replace the preinstalled SIM card with a custom SIM card. Ensure your carrier supports the LTE-M (CAT-M1) standard, which differs from standard 4G (LTE). The device consumes an average of 1 to 2 MB of data per week.

You can check LTE-M coverage for your area on the SIM card provider’s website, 1nce.com, at the following address: https://1nce.com/en/coverage/. Victron Energy also provides a list of operators with active GlobalLink 520 devices on their network via the Victron Energy community.

The GlobalLink 520 packaging contains:

The GlobalLink 520A 1.5 m long power cable with a 1 A inline fuse, M10 eyelets, and a power connectorTwo plug-in terminal blocksPlease note that VE.Direct cables are not included and must be purchased separately.

To install the GlobalLink 520, follow these steps:

Note the VRM portal ID written on the device label.Install the GlobalLink 520 near the Victron devices you want to monitor.Connect your compatible devices to the GlobalLink 520 via a VE.Direct cable or Bluetooth.Power the unit with DC (8 V - 70 V).The device will start connecting to the network (the LED will flash blue).

Once the GlobalLink 520 is installed and connected to the network (the LED indicator flashes yellow and/or green), you can add your installation to your account on the VRM portal. Use the VRM portal ID noted on the device label during the installation step.

The GlobalLink 520 connection status is indicated by its multicolor LED:

Flashing blue: Connecting to VRM in progress.Flashing green: All systems operational, connected to VRM and both VE.Direct devices.Flashing green and yellow: Connected to VRM, but only one VE.Direct device connected.Flashing yellow: Connected to VRM, but no VE.Direct devices connected.Solid red: Problem detected, device is rebooting.Flashing purple: Device is updating its software.

The GlobalLink 520 requires a DC power supply with a wide voltage range, from 8 to 70 VDC.

The GlobalLink 520 comes with a preinstalled and prepaid SIM card providing five years of 4G LTE-M connectivity at no additional cost. This connectivity is included in the device's purchase price.