Kit mise à jour de l’unité de puissance ST4000 à MKII

Autopilot Mk II Wheel Drive and Installation Kit

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 6%

Raymarine

E12093

Zestaw modernizacyjny jednostki napędowej ST4000 do MkII

Conçu pour les propriétaires de pilotes automatiques ST4000, le kit Raymarine E12093 permet une mise à jour vers l'unité de roue motrice Mk II, offrant une compatibilité avec les systèmes de direction de 1 à 3.5 tours de butée à butée et les roues de 3 à 8 rayons. Ce kit intègre une unité de puissance moderne au système ST4000 existant. Le kit inclut l'unité de roue motrice, le support de piédestal, des inserts de serrage de rayon, des vis, des forets, une clé Allen, des rotules, un câble d'alimentation de 4.5m et, si fourni, un capteur d'angle de barre.

Prix publicBénéficier du tarif pro

4.066,79 PLN

4.066,79 PLN ~~4.335,86 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ montażu	Fixation sur roue et sur piédestal
Materiał	Plastique ABS et métal
Kolor	Noir
Modele kompatybilne	Pilotes automatiques Raymarine ST4000
Wymiary produktu	Diamètre global : 361 mm ; Diamètre couverture avant : 228 mm ; Hauteur : 135 mm ; Tube moteur : Ø 48 mm, longueur 171 mm (+ 60 mm dégagement câble)
Wykończenie	Gris mat
Typ montażu	Fixation sur roue et piédestal
Zawartość zestawu	Unité de roue motrice, support de piédestal, 3 inserts de serrage de rayon 16 mm, 3 inserts de serrage de rayon 12 mm, 3 colliers de serrage de rayon, 6 vis de serrage M5 x 16 mm, 4 vis de support n° 10 x 3/4 in, forets (6 mm, 4 mm), clé Allen 3 mm, 2 rotules, goupille de barre, 3 vis à tête cylindrique n° 8 x 3/4 in, goujon, 2 écrous, 2 vis à tête fraisée n° 8 x 3/4 in, câble d'alimentation 4.5 m, clip de câble et vis, capteur de position de gouvernail (si fourni)
Typ produktu	Unité d'entraînement de roue pour pilote automatique

Description détaillée

Zestaw modernizacyjny Raymarine E12093 przeznaczony jest dla użytkowników systemów autopilota ST4000, którzy chcą zmodernizować swoją jednostkę napędową. Zestaw zastępuje starą jednostkę napędową nowym napędem koła sterowego Mk II, integrując tym samym technologię autopilotów z serii Evolution firmy Raymarine. To rozwiązanie pozwala przedłużyć żywotność istniejących systemów ST4000 poprzez poprawę wydajności jednostki sterującej.

Zgodność i specyfikacja techniczna

Napęd koła sterowego dostarczany w zestawie jest kompatybilny z kołami sterowymi o 3, 4, 5, 6, 7 lub 8 ramionach. Został zaprojektowany do współpracy z układami sterowania o zakresie obrotu od 1 do 3,5 obrotu (od ogranicznika do ogranicznika). Średnica przedniej osłony wynosi 228 mm (9,0 cala), a średnica całkowita 361 mm (14,2 cala). Wysokość urządzenia wynosi 135 mm (5,3 cala), średnica rury silnika to 48 mm (1,9 cala) przy długości 171 mm (6,7 cala), wymagając dodatkowego luzu 60 mm (2,4 cala) dla kabla. Jednostka ta integruje się z istniejącym sterownikiem autopilota ST4000, oferując ukierunkowaną modernizację zamiast całkowitej wymiany systemu.

Montaż i zawartość zestawu

Montaż napędu koła sterowego polega na zamocowaniu jednostki do koła przy użyciu wstępnie nawierconych otworów mocujących w osłonie przedniej oraz podłączeniu do istniejącej jednostki sterującej. Zestaw E12093 obejmuje sam napęd koła sterowego, wspornik podstawy, trzy wkładki mocujące ramienia o średnicy 16 mm i trzy o średnicy 12 mm, trzy obejmy mocujące ramię, sześć śrub M5 x 16 mm, cztery śruby mocujące nr 10 x 3/4 cala, wiertła o średnicy 6 mm i 4 mm, klucz imbusowy 3 mm, dwie kulowe przeguby, sworzeń steru, trzy wkręty walcowe nr 8 x 3/4 cala, sworzeń, dwie nakrętki, dwa wkręty z łbem stożkowym nr 8 x 3/4 cala, kabel zasilający o długości 4,5 m (15 stóp), uchwyt kabla oraz śrubę nr 6 x 1/2 cala, a także czujnik kąta wychylenia steru (jeśli był pierwotnie wyposażony). W zależności od konfiguracji może być wymagany opcjonalny zestaw montażowy do podstawy/przegrody (E15017).

Documentations

Type	Nom
	EN - Notice d'installation - Kit mise à jour de l’unité de puissance ST4000 à MKII

Avis de l'expert

Pol CONIN

Kierownik ds. cyfrowych

« ST4000 upgrade: performance and autopilot integration »

This Raymarine E12093 kit is a practical and cost-effective solution for navigators equipped with an ST4000 autopilot who wish to upgrade to a more modern drive unit without replacing their entire system. By integrating the Mk II wheel drive, this kit enables a transition to a more responsive and potentially higher-performance tiller drive, aligned with Raymarine’s Evolution range standards.

In terms of installation, the process is manageable for a knowledgeable user. The instructions detail key steps such as attaching the unit to the wheel spokes (using pre-drilled holes) and securing the bracket (which may require drilling). It is critical to follow EMC installation guidelines to avoid interference, particularly by maintaining adequate spacing from radio transmission equipment. Compatibility with wheels featuring 3 to 8 spokes and steering systems with 1 to 3.5 turns lock-to-lock covers a wide range of cruising sailboats.

The practical value of this kit lies in its ability to revitalize an existing system. Rather than investing in a complete autopilot, this kit offers a targeted upgrade, optimizing the cost-to-benefit ratio for the user. It is particularly relevant for boats where the ST4000 controller is still functional and where the mechanical aspect of steering can be improved. However, it is essential to verify that the rest of the system (rudder sensor, compass) is in good condition to fully benefit from this update.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Zestaw modernizacyjny jednostki napędowej ST4000 do MkII

4.066,79 PLN

4.066,79 PLN ~~4.335,86 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Raymarine E12093 update kit?

The Raymarine E12093 update kit is designed to modernize existing ST4000 autopilot systems. It replaces the old power unit with a Mk II wheel drive, integrating the technology from Raymarine's Evolution autopilot range. This kit aims to enhance the performance of the helm control unit and extend the lifespan of ST4000 systems.

Which wheel types are compatible with the drive unit of this kit?

The drive unit supplied in this kit is compatible with 3-, 4-, 5-, 6-, 7-, or 8-spoke wheels.

What are the dimensions of the drive unit included in the E12093 kit?

The drive unit has a front cover diameter of 228 mm (9.0 in) and an overall diameter of 361 mm (14.2 in). Its height is 135 mm (5.3 in). The motor tube has a diameter of 48 mm (1.9 in) and a length of 171 mm (6.7 in), requiring an additional 60 mm (2.4 in) clearance for the cable.

Is this kit a complete replacement for the ST4000 autopilot system?

No, this is a targeted upgrade kit. It replaces the power unit with an ST4000 Mk II wheel drive and integrates with the existing autopilot controller, but does not constitute a full system replacement.

Which components are included in the E12093 upgrade kit?

The E12093 kit includes the following items:

The drive unitA pedestal mountThree 16 mm spoke clamping insertsThree 12 mm spoke clamping insertsSix clamping collarsSix M5 x 16 mm clamping screwsFour #10 x ¾ in support screwsA 6 mm drill bitA 4 mm drill bitA 3 mm Allen keyTwo ball jointsOne tiller pinThree #8 x ¾ in cheese-head screwsOne studTwo nutsTwo #8 x ¾ in countersunk screwsA 4.5 m (15 ft) power cableOne cable clip and a #6 x ½ in screw

What are the main steps to install the drive unit?

Installing the drive wheel unit involves four main steps:

Drilling the clamping holes for the spokes in the front cover.Attaching the drive wheel unit to the wheel.Attaching the pedestal bracket.Connecting the drive to the existing control unit.

Is the drive unit compatible with all steering systems?

The unit is designed to operate with steering systems having between 1 and 3.5 turns from hard-over to hard-over.

Should the cover be removed from the drive unit before installation?

Yes, the cover must be removed from the drive wheel unit. The cover is held by three "push-fit" posts that insert into three sockets on the drive ring. To remove it, hold the motor with one hand and pull the cover upward and away from the drive unit.

How to identify the correct spoke holes for tightening on the front cover?

The spoke holes are numbered inside the cover. Position the arrow on the cover upwards and refer to the diagrams in the manual to identify the appropriate holes based on the number of spokes on your wheel (for example, for a 5-spoke wheel, drill the 4 holes marked '5'). It is recommended to mark the holes and verify their alignment by placing the cover against your wheel.

Is it necessary to cut or modify the supplied cables?

Raymarine's EMC installation guidelines recommend using the cables specified by Raymarine. Cutting and reconnecting these cables can compromise EMC performance and must be avoided unless detailed in the installation manual.

Are there any precautions to take regarding the power supply during installation?

Yes, it is critical to ensure the power supply is cut off before making any electrical connection for safety reasons.

Does the product require calibration after installation?

Yes, although the product is supplied with default settings, it is necessary to complete the commissioning procedures detailed in the "Commissioning" section of the relevant autopilot controller manual to ensure optimal performance on your sailboat.

Where should I register my Raymarine product for warranty?

To register your new Raymarine product, you can do so on the Raymarine website at www.raymarine.com/warranty.

What are the recommendations to avoid electromagnetic interference (EMC)?

For optimal EMC performance, Raymarine equipment and connected cables should be:

At least 1 metre (3 feet) away from any equipment transmitting or cables carrying radio signals (e.g., VHF radios, cables, and antennas). For SSB radios, this distance must be increased to 2 metres (7 feet).More than 2 metres (7 feet) from the path of a radar beam.The equipment must be powered by a separate battery from the one used for engine starting, to avoid voltage drops and starter transients that could cause the equipment to reset.

What is the role of this kit compared to Raymarine's Evolution technology?

This kit enables integration of Raymarine Evolution autopilot technology into an existing ST4000 system by replacing the power unit with an Mk II wheel drive.

Is the E12093 kit compatible with autopilot controllers other than the ST4000?

The kit is specifically designed as a "ST4000 power unit upgrade kit to MKII" and integrates with the existing ST4000 autopilot controller. It is not stated to be compatible with other controllers.

What is the length of the power cable supplied with the kit?

The kit includes a power cable with a length of 4.5 meters (15 feet).

Is the kit supplied with the tools required for drilling?

Yes, the kit includes a 6 mm drill bit and a 4 mm drill bit, as well as a 3 mm Allen key, required for certain installation steps.

What is the function of the pedestal mount included in the kit?

The pedestal mount is a component included in the kit, essential for securing the drive unit to your boat's helm pedestal, ensuring stable and secure installation.