Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 17%

Blue Sea Systems

7504-BSS

Sterownik Deckhand – 24 V DC 6 A

Q: What is the BLUE SEA Deckhand 7504-BSS autopilot drive?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: Which types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates with a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current this inverter can handle?

The maximum output current that the Deckhand 7504-BSS drive can deliver is 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness control is achieved via pulse-width modulation (PWM), ensuring smooth and gradual variation in light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the delayed illuminated output function?

To activate the illuminated output function:For a 1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute. For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the inverter stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive’s switch pressed until the circuit flashes to reset it.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer integrates a memory function that stores the last used light intensity setting.

Q: What is the operating temperature range of this variable frequency drive?

The inverter is designed to operate within a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Napięcie: 24 V

12 V 24 V

Prąd: 6 A

6 A 12 A

Prix publicBénéficier du tarif pro

102,30€

102,30€ ~~124,32€~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ interfejsu sterowania	Interrupteur momentané (ON)-OFF-(ON)
Typ sterowania	Modulation de largeur d'impulsion (PWM)
Systemy oświetlenia kompatybilne	LED non régulées, incandescentes, halogènes
Zone Control	Non
Zakres napięcia pracy	18 à 32
Typowe zużycie energii	<0.048
Typ montażu	Montage sur panneau
Wymiary produktu	82.55 x 88.9 x 50.8 mm
Kompatybilny z ściemniaczem	Oui
Zawartość opakowania	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Kod kreskowy produktu	SK-000051475
Certyfikacje	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Maksymalny prąd wyjściowy	6 A
Napięcie znamionowe	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Zakres temperatury pracy	−40°C à 85°C
SKU produktu	7504-BSS
Typ produktu	Variateur d'intensité

Description détaillée

Zaprojektowany do optymalizacji oświetlenia na jachcie, sterownik Deckhand 7504-BSS firmy BLUE SEA to cyfrowe rozwiązanie do regulacji natężenia światła w systemach 24 V DC. Umożliwia sterowanie diodami LED bez regulacji, żarówkami żarnikowymi oraz halogenami. Funkcja podświetlanego wyjścia zapewnia regulowany czas opóźnienia (od 1 do 5 minut) dla bezpieczeństwa podczas wchodzenia na pokład i schodzenia z niego. Sterownik obsługuje wiele miejsc montażu przełączników i posiada pamięć ostatniego ustawienia jasności.

Funkcjonalności i osiągi

Wbudowany moduł "bulb saver" wydłuża żywotność żarówek podczas ładowania akumulatorów pokładowych. Przesunięte języki montażowe ułatwiają instalację kilku sterowników obok siebie, optymalizując przestrzeń w rozdzielni elektrycznej. Zintegrowana ochrona przed przeciążeniami zapewnia bezpieczeństwo obwodu – system można zresetować, przytrzymując wciśnięty przełącznik sterownika do momentu, aż obwód zasygnalizuje błyskiem.

Specyfikacja techniczna i zgodność

Pracujący przy napięciu znamionowym 24 V DC z zakresem roboczym 18 V – 32 V, sterownik Deckhand 7504 osiąga maksymalny prąd wyjściowy 6 A. Pobór mocy w stanie czuwania wynosi poniżej 2 mA, a zakres temperatur pracy wynosi od −40°C do 85°C. Regulacja jasności odbywa się metodą PWM (modulacja szerokości impulsu), zapewniając płynną zmianę natężenia. Produkt spełnia normy E, ISO 8846 oraz SAE J1171 dotyczące ochrony przed zapłonem zewnętrznym, co potwierdza jego niezawodność w środowisku morskim.

Pozycjonowanie w ofercie BLUE SEA

W serii Deckhand firmy BLUE SEA model 7504 stanowi referencyjne rozwiązanie 24 V DC 6 A. Uzupełnia dostępne wersje 12 V DC, takie jak 7506 (6 A), 7507 (12 A) i 7508 (25 A), a także mocniejsze modele 24 V DC, np. 7509 (12 A). Sterownik ten został zaprojektowany jako następca starszych modeli, takich jak 7501 lub 7502, oferując lepsze osiągi pod względem prądu i funkcjonalności dla systemów 24 V.

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Sterownik Deckhand – 24 V DC 6 A

102,30€

102,30€ ~~124,32€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the BLUE SEA Deckhand 7504-BSS autopilot drive?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Which types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates with a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current this inverter can handle?

The maximum output current that the Deckhand 7504-BSS drive can deliver is 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness control is achieved via pulse-width modulation (PWM), ensuring smooth and gradual variation in light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the delayed illuminated output function?

To activate the illuminated output function:

For a 1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.
For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the inverter stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive’s switch pressed until the circuit flashes to reset it.

Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer integrates a memory function that stores the last used light intensity setting.

What is the operating temperature range of this variable frequency drive?

The inverter is designed to operate within a wide temperature range, from -40°C to 85°C.

What is the power consumption of the drive in standby (parasitic) mode?

The Deckhand drive’s maximum parasitic current draw is less than 2 mA.

Is it possible to use this inverter/charger with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points on board.

How do offset mounting tabs facilitate installation?

The offset mounting tabs allow multiple drives to be installed side by side in a compact arrangement, thus optimizing the available space on the electrical panel.

What type of switch is included with the Deckhand 7504-BSS dimmer?

The drive comes with a momentary (ON)-OFF-(ON) switch (PN 8216 reference).

How to connect the inverter to the boat's electrical system?

The dimmer connects as follows:

The red wire connects to the +24V DC power supply. The two black wires connect to ground (negative bus bar). The blue wire connects to the lamp. The gray and white wires are the inputs for the switch (Down Input and Up Input). A fuse must be installed on the +24V DC line before the dimmer.

What are the dimensions of the Deckhand 7504-BSS autopilot drive?

The Deckhand 7504-BSS drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS variable frequency drive compliant with marine standards?

Yes, this inverter is E-rated and compliant with external ignition protection requirements per ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer with LEDs that already have an integrated driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LEDs, as well as incandescent and halogen bulbs. Using it with already regulated LEDs may not work correctly or could damage the dimmer or the lights.