Alternator Alpha Compact 14/200 cu regulator Alpha Pro III

The Alpha Compact 14/200 alternator delivers exceptional power output even at low RPM (from 1350 rpm). It is ideal for quickly recharging your battery banks during harbour manoeuvres or at anchor, while maintaining a compact size suitable for tight engine compartments.

Yes, this model is delivered as standard with the Alpha Pro III smart charge controller. This controller optimizes charging using a three-stage automatic algorithm (Bulk, Absorption, Float) to maximize battery lifespan.

The Alpha Pro III alternator and its regulator are compatible with lead-acid (flooded), Gel, AGM, and Lithium-ion batteries.

The Alpha Compact 14/200 alternator absorbs a maximum power of 5.6 kW, which is equivalent to approximately 7.6 hp (horsepower) of load on your engine.

Absolutely. Thanks to its patented magnetic design and optimized cooling via integrated dual fans, it can withstand a maximum operating temperature of 120 °C.

The Alpha Pro III regulator automatically compensates charging voltage based on temperature (-30mV/°C for a 12 V system) using the included battery temperature sensor. This ensures safe and efficient charging.

No, lithium-ion batteries do not require external temperature compensation. The temperature sensor provided is mainly intended for lead-acid battery banks (flooded, gel, AGM).

This alternator features a very dense and compact design, weighing only 7.5 kg, which greatly facilitates installation in confined spaces.

Yes, the included Alpha Pro III regulator is fully compatible with the MasterBus network. It features two RJ-45 ports for real-time monitoring and advanced configuration from a centralized display.

The Alpha Compact 14/200 alternator is extremely mechanically robust and can withstand rotational speeds up to 20,000 RPM.

The positive output connection (B+) is made via two M8 terminals. It is crucial to tighten the connections to the recommended torque and use cables of appropriate cross-section to avoid overheating or voltage drop.

No, the 14/200 model is specifically designed for 12 V systems (it delivers a nominal current of 200 A at 12 V). For a 24 V system, you should look at the 28/xxx series models.

Yes, the alternator is supplied with a 1.5-metre oil-resistant wiring harness, specifically designed for easy and secure connection between the Alpha Pro III regulator and the alternator.

By default (at 25 °C), the phase voltage in Bulk and Absorption mode is set to 14.25 V, and the float voltage (Float) is 13.25 V. These values are fully adjustable via the MasterBus interface.

Yes, if an isolated mounting is required for your installation, you can use insulating sleeves (available as an option) to insert on each side of the mounting holes, and connect a specific earth cable lug.

The connection for the tachometer signal (W signal or RPM) is made very simply via an isolated quick-connect (faston tab) located directly on the alternator housing.

The D+ LED connected to the regulator serves as an alarm indicator. For example, 3 short flashes every 2 seconds on the D+ LED indicate an excessively high field current, while 2 flashes signal an excessively high battery voltage.

Yes, thanks to the built-in alternator temperature sensor, the Alpha Pro III regulator will linearly reduce output power if the temperature reaches 85 °C and will cut the charge at 120 °C to protect the equipment from any damage.

The Alpha Compact 14/200 is designed to deliver excellent output at low RPM. Its generation speed starts at just 1350 RPM (alternator rotation speed), enabling rapid charging even when the engine is idling.

For the MasterBus network, power supply follows the rule of 1 powered device for every 3 non-powered devices. It is important to distribute powered devices evenly along the line and never create a looped or ring network.