e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 10%

Blue Sea Systems

11001-BSS

Izklop-preklopnik baterije e-Series 3 položajev z AFD

L'interrupteur de batterie BLUE SEA e-Series Selector 3 Position avec AFD (11001-BSS) est une solution robuste pour la gestion de deux parcs de batteries sur les moteurs in-bord. Il offre une capacité continue de 350 A à 32 V DC et intègre une protection Alternator Field Disconnect pour l'alternateur. Conçu pour répondre aux exigences ABYC et UL, il garantit sécurité et fiabilité en milieu marin. Ce modèle fait partie de la gamme e-Series actuelle de Blue Sea, et est livré avec l'interrupteur seul.

Public priceGet pro pricing

72,24€

72,24€ ~~80,34€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Namembnost izdelka	Gestion et isolation des parcs de batteries, démarrage d'urgence
Tip stikala	Sélecteur de batterie
Nihajoči tok (A)	350
Prekinoma tok (A)	600
Vžigalna tok (A)	1200
Maksimalna napetost enosmernega toka	32
Število polov	1
Položaji	3
AFD-zaščita	Oui
Tip priključka	Goujon (cuivre étamé)
Velikost priključka	3/8"-16 (M10)
Vrsta ožičenjske povezave	Cosses à œillet
Vrsta upravljanja	Manuel rotatif
Tip montaže	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
IP razred	IP66
Območje delovne napetosti	Jusqu'à 32V DC
Premer izreznega odprtja za panel	92.08
Območje delovnih temperatur	-40 à +85 °C
Teža	0.52
Dimenzije (D x V x G)	98 x 98 x 40.39
Garancija	99.0
Usklajenost z ABYC	Meets all ABYC requirements
Barva aktuatorja	Rouge
Actuator Feedback Type	Tactile
Stil aktuatorja	Bouton rotatif
Alternator Diode Protection Mechanism	Réduction de la sortie de l'alternateur à zéro
Jakost toka	350
Battery Inputs Count	2
Cable Clearance Mm	27.9
Cable Entry Count	1
Cable Size To Meet Ratings Awg	4/0 AWG
Cable Size To Meet Ratings Mm2	120
Cable Terminal Torque Nm	24.86
Cranking Current Duration	30
Emergency Start Capability	Non
Tip združljivega motorja	In-bord essence ou diesel
Flange Nut Material	Acier inoxydable
High Power Application Focus	Haute puissance, fiabilité et faible génération de chaleur
Ignition Protection Standard	SAE J1171, ISO 8846
Vrsta namestitve	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
Intermittent Current Duration	5
LED indikator	false
Make Before Break Feature	Oui
Max Accepted Cable Size Mm2	120
Maksimalno število baterij v serijski povezavi	2.0
Maksimalna polnilna tok (A)	350.0
Maksimalni izpustni tok (A)	350.0
Mounting Area Required Sq In	15
Mounting Compatibility Brands	Perko, Guest
Mounting Hardware Type	Vis 1/4" (M6)
Orientacija montaže	Montage en surface, sur panneau arrière ou sur panneau avant
Vrhovni izpustni tok	1200.0
Okoliš uporabe izdelka	Marin et embarqué
Podtip izdelka	Interrupteur de batterie
Recommended Cable Connection Method	Un câble 4/0 AWG à chaque borne batterie, deux câbles 4/0 AWG à la borne commune
Priporočeni kontinuirani tok izpusta	350.0
Selector Positions Description	Batterie 1, Batterie 2, Arrêt
Območje temperatur skladiščenja	-40 à +85 °C
Funkcija stikala	Sélection de batterie
Terminal Stud Length Mm	22.22
Terminal Stud Material	Cuivre étamé
Terminal Stud One Piece Design	Oui
Terminal Torque Nm	15.82
Ul Certification Standard	UL 1107, UL 1500
Warranty Period Text	Garantie à vie

Detailed description

Namenjen električnim morskim in vgrajenim sistemom, preklopnik baterij BLUE SEA e-Series Selector 3 položajev z AFD (referenčna številka 11001) zagotavlja zanesljivo upravljanje dveh baterijskih parkov. Ta preklopnik s 3 položaji (baterija 1, baterija 2, izklop) je namenjen predvsem aplikacijam, ki zahtevajo visoko moč, preverjeno zanesljivost in nizko generacijo toplote, kot so čolni opremljeni z notranjimi motorji na bencin ali dizel.

Zmogljivost in tehnične značilnosti

Model 11001 zagotavlja električno zmogljivost z zmožnostjo zagona 1200 A v 30 sekundah. Podpira prekinjen tok 600 A (5 minut) in kontinuiran tok 350 A pri 32 V DC. Njegovi vijaki za priključke iz pocinkane bakrene zlitine 3/8"-16 (M10) zagotavljajo maksimalno prevodnost in odpornost proti koroziji, z dolžino 22,22 mm za nameščanje več kabelskih končnic. Priporočeni navor za privijanje je 15,82 N·m (140 in-lb). Za dosego nominalnih vrednosti je potrebna uporaba kablov 4/0 AWG (120 mm²).

Napredne funkcionalnosti in skladnost

Posebna značilnost modela 11001 je funkcija Alternator Field Disconnect (AFD), ki ščiti diode alternatorja v primeru izklopa motorja z vklopljenim vžigom, tako da zmanjša izhod alternatorja na nič. Ta zaščita je ključna za trajnost sistema polnjenja. Preklopnik je tudi zaščiten proti vžigu (ignition protected), kar ustreza zahtevam SAE J1171, UL 1500 in ISO 8846, kar ga naredi varnega za namestitev na čolnih na bencin. Skladno je z zahtevami ABYC za preklopnike baterij in je naveden UL 1107. Njegova ohišje omogočajo montažo na površino ali na zadnjo stran panela, kar zagotavlja fleksibilnost pri namestitvi. V nasprotju s modeloma Selector 4 Position ali Dual Circuit Plus iz serije e-Series ta preklopnik nima funkcije "make-before-break" za preklapljanje med bankama 1 in 2, kar pomeni, da je potrebno preiti skozi položaj "OFF" pred preklopom med bankama.

Documentation

Type	Nom
	EN - Instructions - e-Series Selector 3 Position Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector 3 Position Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector 3 Position Battery Switch with AFD
	EN - Manual - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD

Expert review

Pol CONIN

Odgovorni digitalni vodja

« Technical analysis: BLUE SEA e-Series Selector 3-position battery switch with AFD »

The BLUE SEA e-Series Selector 3-position battery switch with AFD (model 11001-BSS) is a relevant solution for vessels equipped with two battery banks, typically a starter bank and a house bank. Its primary function is to isolate these banks, allowing the user to select power from Battery 1, Battery 2, or disconnect entirely in the OFF position. This is fundamental for electrical safety on board and energy management.

The key added value of this model lies in its Alternator Field Disconnect (AFD) system. This feature is crucial for preventing irreversible damage to the alternator's diodes if the switch is toggled to OFF while the engine is running. Many competing switches or basic models in Blue Sea's m-Series lack this protection, requiring manual precautions or additional circuits. The integration of AFD simplifies installation and enhances the reliability of the charging system.

For installation, it must be mounted near the batteries and the specified torque values (15.82 N·m) for 3/8"-16 (M10) studs must be respected; these are tin-plated copper for better durability in marine environments. Using 4/0 AWG (120 mm²) cables is recommended to ensure nominal performance. It is critical to note that, unlike "make-before-break" switches (such as certain Selector 4-position or Dual Circuit Plus e-Series models), switching from "Battery 1" to "Battery 2" (or vice versa) must be done by passing through the "OFF" position to avoid any uncontrolled interruption of charge or discharge. This is a limitation to consider for systems that cannot tolerate any momentary power interruption. This model is ideal for owners seeking simple and secure management of two batteries with integrated alternator protection, without the complexity or cost of a four-position switch or a Dual Circuit Plus if they do not require the direct combination function via the selector.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Izklop-preklopnik baterije e-Series 3 položajev z AFD

72,24€

72,24€ ~~80,34€~~

Frequently asked questions

Need help? Contact us

What are the main functions of the Blue Sea e-Series Selector 3-position battery switch with AFD?

The switch is designed to manage two battery banks. It allows isolation of the starter and service circuits, and offers the ability to combine both battery banks for emergency starting. It has three positions: battery 1, battery 2, and off (OFF).

What does the 'AFD' (Alternator Field Disconnect) function on this switch mean?

The AFD (Alternator Field Disconnect) function is a distinctive feature that protects the alternator's diodes. If the switch is turned off while the engine is running, it reduces the alternator output to zero, which is critical for the longevity of the charging system.

What is the DC current capacity of this battery switch?

This switch has a DC current capacity of 350 amperes at 32 V DC.

What is its cranking rating?

The cranking rating of this switch is 1,200 amperes for 30 seconds.

Is the switch ignition-protected for use on gasoline-powered boats?

Yes, this switch is ignition-protected. It meets the requirements of SAE J1171, UL 1500, and ISO 8846 standards, making it safe for installation on boats with gasoline engines.

Which types of boats are best suited for this battery switch?

This switch is specifically designed for marine applications requiring high power handling, proven reliability, and low heat generation, such as on boats equipped with inboard gasoline or diesel engines.

What material are the terminal studs made of and what are their dimensions?

The terminal studs are made of tinned copper, ensuring maximum conductivity and corrosion resistance. They are sized at 3/8"-16 (M10) with a length of 22.22 mm (7/8") to accommodate multiple cable lugs.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32 V DC.

What are the certifications and compliance standards for this product?

This product meets ABYC requirements for battery switches, is UL listed (UL 1107 for power switches), and complies with UL 1500 and SAE J1171 ignition protection standards. It is also CE and ISO 8846 certified.

Is the switch water-resistant?

Yes, the switch is rated IP66, meaning it is protected against powerful water jets.

What is the intermittent current rating of this switch?

The switch has an intermittent current rating of 600 amperes for 5 minutes, in accordance with UL 1107.

Where should I install this battery switch?

It is recommended to install the switch in an easily accessible location near the batteries.

What are the possible mounting types for this switch?

The switch housing design allows for surface mounting or rear-panel mounting.

What is the recommended cable gauge for this switch to meet its nominal ratings?

To fully meet the switch's nominal ratings, cables of 4/0 AWG (120 mm²) are required.

How to connect battery cables to the switch terminals?

To comply with the rated value, a 4/0 AWG (120 mm²) cable must be connected to each battery terminal and two 4/0 AWG (120 mm²) cables to the common terminal. Battery cable lugs must be secured under the lock washer and nut.

What is the recommended torque for the switch terminal studs?

The recommended tightening torque for the switch terminal studs is 15.82 N·m (140 in-lb). For battery cable terminals secured under the nut, the tightening torque is 24.86 N·m (220 in-lb).

What precautions should I take before installing the battery switch?

Before installation, it is imperative to disconnect the battery's positive terminal. It is also strongly recommended to consult a marine electrical professional to ensure correct and secure wiring.

How to wire the AFD (Alternator Field Disconnect) function?

To wire the AFD function, disconnect the wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 of the switch.