Deckhand Dimmer - 24V DC 12A - Deckhand Dimmer - 24V DC 12A

Deckhand Dimmer - 24V DC 12A - Dimensioned Drawing

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Prihranek 13%

Blue Sea Systems

7509-BSS

Regulator Deckhand - 24 V DC 12 A

Q: What is the primary function of the Deckhand 7509 dimmer?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the brightness of unregulated LEDs, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Q: Which types of lights can be controlled by this dimmer?

This dimmer can control the brightness of:Unregulated LED lightsIncandescent bulbsHalogen bulbs

Q: What is the nominal voltage required for the Deckhand 7509 drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

Q: What is the supported operating voltage range for this variable speed drive?

The Deckhand 7509 variable speed drive can operate within a voltage range of 18 V to 32 V DC.

Q: What is the maximum output current that the drive can handle?

The Deckhand 7509 drive can handle a maximum output current of 12 A.

Q: How does the "bulb saver" function protect bulbs?

The "bulb saver" function built into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

Q: How does the overcurrent protection of the drive work?

The Deckhand 7509 drive has built-in overcurrent protection. If the device stops working due to an overcurrent, simply correct the excessive load, then hold the drive switch pressed until the circuit flashes to reset it.

Q: What temperature range can the Deckhand 7509 drive operate in?

The Deckhand 7509 drive is designed to operate across a wide temperature range, from −40°C to 85°C.

Q: What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) for light intensity control.

Q: Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer has memory that retains the last lighting intensity setting used.

Le variateur BLUE SEA Deckhand 7509 est un contrôleur numérique d'éclairage 24 V CC de 12 A, optimisé pour les LED non régulées, halogènes et incandescentes. Il se positionne comme une solution polyvalente dans la gamme Deckhand, avec une sortie temporisée et une protection intégrée contre les surintensités. Un interrupteur momentané (ON)-OFF-(ON) est inclus.

Napetost: 24 V

12 V 24 V

Tok: 12 A

6 A 12 A

Naslov: Privzeti naslov

Privzeti naslov Privzet naslov

Public priceGet pro pricing

122,57€

122,57€ ~~141,60€~~

DDV vključen Dostava se izračuna ob plačilu.

Na zalogi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Support service

Choose complementary installation support

Technical specifications

Vrsta vmesnika za upravljanje	Interrupteur momentané (ON)-OFF-(ON)
Vrsta upravljanja	Modulation de largeur d'impulsion (PWM)
Združljivi sistemi osvetlitve	LED non régulées, incandescentes, halogènes
Zone Control	Non
Območje delovne napetosti	18 à 32
Tipična poraba električne energije	< 0.05
Vrsta namestitve	Montage en surface
Dimenzije izdelka	82.55 x 88.9 x 50.8
Podpora za zatemnitev	Oui
Vsebina paketa	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Certifikati	E-marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Dimmer Memory Function	Oui
Ignition Protection Standard	ISO 8846, SAE J1171
Illuminated Exit Delay Max Minutes	5
Maximum Output Current	12
Maximum Parasitic Current	<2
Nazivna napetost	24
Operating Temperature Range C	-40 à 85
Overcurrent Protection	Oui
Reset Mechanism Type	Manuel (maintenir l'interrupteur enfoncé)

Detailed description

Namenjen sistemom na 24 V DC, regulator Deckhand 7509 podjetja BLUE SEA je digitalno rešitev za upravljanje osvetlitve. Omogoča natančno regulacijo svetilnosti za neurejene LED, žarnice z žarilno nitjo in halogene. Regulator vključuje funkcijo osvetljene izhodne naprave z nastavljivim zakasnitvijo od 1 do 5 minut, kar zagotavlja dodatno varnost pri izkrcanju.

Tehnične značilnosti in funkcije

Deckhand 7509 ima pomnilnik za zadnjo nastavitev svetilnosti in podpira več lokacij stikal. Funkcija »bulb saver« ščiti žarnice pred prezgodnjim staranjem, ko se baterije čolna polnijo. Premaknjene nogice za montažo omogočajo optimalno namestitev z možnostjo nameščanja več regulatorjev v bližini. Vključen je trenutni stikalo (ON)-OFF-(ON) za takojšnjo uporabo. Ima vgrajeno zaščito pred preobremenitvijo, ki se ponastavi z enostavno manipulacijo stikala.

Vgradnja in skladnost

Z nominalno napetostjo 24 V DC in delovnim območjem od 18 V do 32 V, ta regulator upravlja z izhodnim tokom do 12 A z manjšim odvodnim tokom pod 2 mA. Deluje v razširjenem temperaturnem območju od −40°C do 85°C in uporablja upravljanje s pulznim širinskim moduliranjem (PWM). Regulator Deckhand 7509 je skladen z regulativnimi standardi E-marked, ISO 8846 in SAE J1171 za zaščito pred zunanjim vžigom, ter standardi SAE J1455 in SAE J1113. V okviru linije Deckhand podjetja BLUE SEA je model 7509 regulator 24 V DC z 12 A, ki ponuja večjo zmogljivost upravljanja obremenitve kot model 7504 (6 A pri 24 V DC) in se razlikuje od različic 12 V DC, kot so 7507 (12 A) ali 7508 (25 A).

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 12A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 12A

Payment and security

Your payment information and data are processed securely.

Regulator Deckhand - 24 V DC 12 A

122,57€

122,57€ ~~141,60€~~

Frequently asked questions

Need help? Contact us

What is the primary function of the Deckhand 7509 dimmer?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the brightness of unregulated LEDs, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Which types of lights can be controlled by this dimmer?

This dimmer can control the brightness of:

Unregulated LED lightsIncandescent bulbsHalogen bulbs

What is the nominal voltage required for the Deckhand 7509 drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

What is the supported operating voltage range for this variable speed drive?

The Deckhand 7509 variable speed drive can operate within a voltage range of 18 V to 32 V DC.

What is the maximum output current that the drive can handle?

The Deckhand 7509 drive can handle a maximum output current of 12 A.

How does the "bulb saver" function protect bulbs?

The "bulb saver" function built into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

How does the overcurrent protection of the drive work?

The Deckhand 7509 drive has built-in overcurrent protection. If the device stops working due to an overcurrent, simply correct the excessive load, then hold the drive switch pressed until the circuit flashes to reset it.

What temperature range can the Deckhand 7509 drive operate in?

The Deckhand 7509 drive is designed to operate across a wide temperature range, from −40°C to 85°C.

What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) for light intensity control.

Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer has memory that retains the last lighting intensity setting used.

What is the current draw of the drive when in standby (parasitic current)?

The Deckhand 7509 drive’s maximum parasitic current is less than 2 mA, indicating very low energy consumption in standby mode.

How do I activate and set the timed lighting mode?

To activate the timed lighting mode and set the delay:

1-minute delay: Hold the switch in the upper (lit) position for 2 seconds. The lights will flash. Release the switch after the first flash, and the lights will stay on for 1 minute.2- to 5-minute delay: Hold the switch in the upper (lit) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Is a switch provided with the Deckhand 7509 dimmer?

Yes, the Deckhand 7509 dimmer is supplied with a momentary ON-OFF-ON switch.

Do the offset mounting brackets provide a specific advantage during installation?

Yes, the offset mounting brackets of the Deckhand 7509 autopilot are designed to allow multiple autopilots to be mounted close to each other, optimizing installation space.

What should I do if the drive stops working due to an overcurrent?

If the drive stops working due to an overcurrent, you must first correct the excessive load. Then, hold the drive's switch down until the circuit flashes to reset the built-in protection.

Is it possible to control the variator from multiple locations on the boat?

Yes, the Deckhand 7509 variator supports multiple switching locations, allowing you to control it from different points on your boat.

Is the Deckhand 7509 thruster drive compatible with 12 V DC electrical systems?

No, the Deckhand 7509 thruster drive is specifically designed for 24 V DC marine electrical systems and operates within a range of 18 V to 32 V. It is not compatible with 12 V DC systems.

Can this dimmer be used with regulated LEDs?

No, the Deckhand 7509 dimmer is designed to digitally control the intensity of non-regulated LEDs, as well as incandescent and halogen bulbs.

Which safety and compliance standards does this product meet?

The Deckhand 7509 variable thruster complies with several regulatory standards, including:

E-markedISO 8846 (external ignition protection)SAE J1171 (external ignition protection)SAE J1455SAE J1113

Is the Deckhand 7509 variable frequency drive certified for external ignition protection?

Yes, the Deckhand 7509 variable frequency drive complies with the external ignition protection requirements of ISO 8846 and SAE J1171 standards, ensuring safety in marine environments.