Vtičnik v obliki T za omrežje NMEA 2000

The CZone NMEA 2000 T-connector is an essential component designed to individually connect each electronic device to the main backbone of your NMEA 2000 network. It ensures a connection compliant with the topology required by the NMEA 2000 standard.

Its main role is to allow a single electronic device to connect to the NMEA 2000 backbone. It is crucial for maintaining network integrity and avoiding direct daisy-chaining of equipment, a practice prohibited by the NMEA 2000 standard.

Yes, this connector is NMEA 2000-certified, ensuring full compatibility with all devices compliant with this standard, regardless of brand (CZone, B&G, Garmin, Raymarine, etc.).

Yes, CZone modules, including this T-connector, are specifically designed to withstand harsh marine environments, ensuring reliable performance and durability in demanding conditions.

This T-connector is designed to connect a single device in a decentralized manner to the backbone. CZone multi-way connectors (such as models 80-911-0047-00 or 80-911-0048-00) allow centralizing multiple device connections at a single point, providing a different space management approach.

No, the T-connector itself is a passive component and does not require a separate power supply. The NMEA 2000 backbone as a whole requires a 12V DC power supply to operate.

Yes, this connector uses standard micro NMEA 2000 cables and connectors, making it easy to integrate into most NMEA 2000 networks.

The NMEA 2000 standard specifies a bus topology with drop cables (derivations) for each device. Direct daisy-chaining is not allowed as it can disrupt communication and network integrity, making the T-connector essential for compliant installation.

The product part number (SKU) for this CZone NMEA 2000 network T-connector is 80-911-0029-00.

No, this connector is specifically designed for NMEA 2000 networks. It is not compatible with the NMEA 0183 standard, which uses a different protocol and connectors.

To connect a device, you must use an NMEA 2000 drop cable. This cable plugs into the male port of the T-connector and into the NMEA 2000 port of your device.

There is no strict limit on the number of T-connectors themselves, but the NMEA 2000 network has limits regarding the total number of devices (LEN), the maximum backbone length, and the length of drop cables. Each device connected via a T-connector must comply with these specifications.

This is a passive component. It contains no active electronics and does not process data. Its role is purely physical, allowing devices to connect to the backbone.

Yes, its robust design for the marine environment provides resistance to water spray and humidity, typical of NMEA 2000 components intended for marine use.

You will need NMEA 2000 backbone cables to form the main bus and NMEA 2000 drop cables with micro standard connectors to connect devices to the T-connector.

No, this connector is designed for 'micro' type NMEA 2000 networks. 'Mini' NMEA 2000 connectors are a different size and are not directly compatible without specific adapters.

No, T-connectors can be installed in any orientation along the NMEA 2000 backbone. The key requirement is that the backbone is properly terminated at each end of the network.

Yes, for each device you wish to connect to the NMEA 2000 network, a T-connector is a mandatory component to ensure compliance with the standard and proper system operation.

Yes. This T-connector is ideal for adding new devices to an existing NMEA 2000 network by simply tapping into the backbone to create a new connection point.

The CZone NMEA 2000 T-connector is designed to individually connect each electronic device to the main backbone of your NMEA 2000 network. This topology is essential for NMEA 2000 compliance, which prohibits direct daisy-chaining of equipment.

Backbone connection: The T-connector connects directly to the NMEA 2000 backbone cable. It has two backbone ports, allowing the network continuity to be maintained.Device connection: The third port of the T-connector is used to connect a drop cable leading to your NMEA 2000 device (fishfinder, GPS, display, etc.).Power supply: Ensure your NMEA 2000 backbone is properly powered with 12V DC so that all connected devices function correctly.Compatibility: This connector uses standard micro NMEA 2000 cables and connectors, ensuring compatibility with all NMEA 2000-certified devices, regardless of brand.Its robust design is specifically suited to demanding marine environments, providing a reliable and durable connection.