Kabel podaljšave ActiveTarget 3 m (10 ft)

This Lowrance ActiveTarget extension cable is 3 metres (or 10 feet) long.

This cable extends the connection between the ActiveTarget transducer and the ActiveTarget sounder module. It provides increased flexibility for positioning your equipment on the boat.

Yes, like all Lowrance accessories, this cable is designed to withstand the demanding conditions of the marine environment, including exposure to salt water and UV rays.

The part number (SKU) of this extension cable is 000-16069-001.

Yes, this is an official Lowrance accessory, ensuring compatibility and optimal performance with your ActiveTarget systems.

The weight of this extension cable is approximately 0.2 kg.

No, this extension cable is specifically designed for ActiveTarget and ActiveTarget 2 transducer systems. It is not compatible with StructureScan or Active Imaging transducers.

This cable uses proprietary Lowrance connectors specific to ActiveTarget systems, ensuring a secure and watertight connection.

The extension cable does not directly improve the fishfinder's performance. Its role is to provide installation flexibility, allowing you to position the transducer and module optimally for better data acquisition based on your boat's configuration.

Yes, the cable is designed to be sufficiently flexible to facilitate routing through the various sections of your boat, while maintaining its robustness and resistance to marine constraints.

This extension cable is fully compatible with first-generation Lowrance ActiveTarget real-time fishfinder systems as well as the ActiveTarget 2 system.

Lowrance does not recommend using multiple extension cables in series. For optimal performance and to avoid any signal degradation, it is preferable to use a single extension cable of the appropriate length.

Yes, this cable is compatible with Lowrance HDS Live, Elite FS and HDS Carbon multifunction displays, provided they are connected to an ActiveTarget or ActiveTarget 2 module, as the cable connects the transducer to the ActiveTarget module, not directly to the display.

Yes, this extension cable is compatible with all ActiveTarget modules, including the original versions and ActiveTarget 2.

No, this cable has proprietary Lowrance connectors and is designed specifically for Lowrance transducers and ActiveTarget modules. It is not compatible with equipment from other manufacturers.

Installation is straightforward: simply connect one end of the extension cable to the ActiveTarget transducer port and the other end to the corresponding port on the ActiveTarget module. Ensure connections are tight and watertight.

No, no specific tools are generally required to connect this cable. The connectors are designed to be screwed or clipped by hand, ensuring a secure connection.

Yes, during routing, avoid pinching the cable, bending it at sharp angles, or running it near electrical interference sources (such as engine power cables). Use cable ties to secure it firmly and protect connectors from moisture and shocks.

Yes, this cable is designed for marine use and can be permanently installed outdoors. It is made with materials resistant to UV and salt water, but it is still recommended to protect it from excessive chafing and impacts.

The Lowrance ActiveTarget 3-meter (10 ft) extension cable, part number 000-16069-001, is designed to extend the connection between your ActiveTarget™ or ActiveTarget 2 transducer and the ActiveTarget module.

It provides several installation benefits for your fishfinder system:

Increased flexibility for positioning components on your boat. Particularly useful for pole mounts requiring additional length. Makes transducer disconnection easier for storage or transport. Enables multi-station setups, allowing real-time sonar viewing from different observation points.