Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

À la coupeSave 9%

Skysat

2G2.5

2G2.5 TITANEX Cable

The Nexans H07RN-F TITANEX 2G2.5 cable is a flexible rubber cable with 2.5 mm² per conductor, designed for demanding environments. Featuring class 5 flexibility and AG3 impact resistance, it withstands oils, UV, and a maximum conductor temperature of 90°C in continuous service. This cable is ideal for reliable electrical connections in marine or industrial settings.

Retail priceBenefit from the professional rate

3,74€

3,74€ ~~4,15€~~

3,74€ m

Tax included. Shipping calculated at checkout.

Available in stock

LONGUEUR :

M cm

1M 7,5M 10M 15M 20M 35M 50M

Longueur facturée : 1 m (arrondie au mètre supérieur)

Prix publicBénéficier du tarif pro

~~4,15€~~ TTC -10%

3,74€ TTC

soit 3,74€ / m (après remise)

Vous économisez : 0,41€

Free pickup point shipping over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Cable type	Power cable
Section (mm²)	2.5
Number of conductors	2
Color	Black
Max voltage	750
Shielding	Unshielded
Flexibility	High-flex
Current type	AC\|DC
Jacket material	Rubber/elastomer
Conductor material	Copper
Certifications	H07RN-F
Conductor finish	Unfinished
Cable application	Marine power supply
Conductor construction	Multiconductor
Nominal current	16 A
Product type	Flexible electrical cable

Detailed description

The Nexans H07RN-F TITANEX cable, with its 2.5 mm² conductors, is a solution designed for demanding environments. Part of the H07RN-F flexible rubber cable range, it is recognized for its mechanical performance and resistance to harsh conditions, whether industrial, port-related, or event-based. This cable complies with EN 50525-2-21, HD 516, IEC 60245-4 type 66, and NF C32-102-4 standards, and meets the European directive 2011/65/EU (RoHS).

Design and technical performance

The TITANEX H07RN-F features bare copper conductors of flexibility class 5, insulated and sheathed with a special cross-linked elastomer in black. This composition gives it high flexibility and excellent crush resistance (AG3 rating), as well as good resistance to chemicals, oils, and vibrations. The cable is lead-free. It is designed to limit the generation and spread of fire and smoke, with a fire reaction class of Eca according to EN 50575:2014+A1:2016 and is flame-retardant according to IEC 60332-1 and NF C 32-070/C2.

Applications and installation

This cable is suitable for fixed and mobile installations, with a nominal voltage of 450/750V in mobile use and 0.6/1kV in fixed use. Its maximum conductor temperature is 90°C in continuous service. The TITANEX H07RN-F can be laid on cable trays, shelves, inside conduits, or fixed to walls. It can also be installed outdoors without protection thanks to its UV resistance, and submerged with additional mechanical protection. Its flexibility allows a dynamic bending radius of 6 to 8 times its outer diameter and a static bending radius of 3 or 4 times, depending on the diameter, facilitating routing in confined spaces. The presence of a green/yellow (G) conductor ensures electrical protection.

Documentation

Type	Nom
	Nexans TITANEX H07RN-F product sheet

Expert opinion

Pol CONIN

Digital Manager

« Nexans TITANEX H07RN-F 2G2.5: robustness and flexibility for marine environments »

The Nexans TITANEX H07RN-F 2G2.5 cable is a reliable option for electrical installations in marine and industrial environments where robustness and flexibility are critical. Its H07RN-F designation indicates a heavy-duty rubber construction, suited to the mechanical and environmental stresses typical of ships, harbors, or shipyards. The 2.5 mm² cross-section per conductor, combined with a green/yellow protective earth conductor (G), makes it suitable for powering single-phase equipment or small auxiliary circuits requiring secure grounding.

In terms of installation, its class 5 flexibility is a significant advantage for routing through narrow conduits or around obstacles, reducing installation time and difficulty compared to stiffer cables. Its UV resistance allows for deck installations, while its resistance to oils and chemicals ensures extended service life in engine compartments or technical areas. It outperforms standard PVC cables by handling dynamic loads and higher operating temperatures (90°C on the conductor), which is crucial for long-term safety and reliability. However, while its water resistance is rated as 'good,' prolonged immersion without additional mechanical protection is not recommended, limiting its use as a direct submersible cable.

Certified to H07RN-F standards, this cable meets EN 50525-2-21 and is compliant with IEC 60335-1 for appliance safety. It is also suitable for fixed installations in dry, humid, or wet environments, provided it is not subjected to prolonged submersion.

Note: Always verify local electrical codes and marine regulations before installation, as requirements may vary by jurisdiction.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

2G2.5 TITANEX Cable

3,74€

3,74€ ~~4,15€~~

3,74€ m

Frequently Asked Questions

Need help? Contact us

What does the designation '2G2.5' mean for this TITANEX cable?

The designation '2G2.5' for this TITANEX cable indicates it consists of two active conductors and one ground conductor (identified by the green/yellow color), all with a cross-section of 2.5 mm². The 'G' in the designation confirms the presence of the green/yellow protective conductor. This is an H07RN-F type cable, known for its flexibility and robustness.

What are the main applications and environments for using TITANEX H07RN-F cable?

TITANEX H07RN-F cable is designed for demanding applications, whether fixed or mobile. It is ideal for industrial environments (factories, construction sites), ports, or event spaces (festivals, concerts). It can be used to power cranes, machine tools, and motors, both indoors and outdoors.

What are the nominal voltages and maximum operating temperatures for this cable?

This cable has a nominal voltage rating of 450/750V for mobile use and 0.6/1kV for fixed installation. The maximum temperature on the conductor is 90°C in continuous service, and it can withstand up to 250°C in the event of a short circuit. Its operating temperature range is from -25°C to 55°C.

Can the TITANEX 2G2.5 cable be installed outdoors or submerged in water?

Yes, this cable can be installed outdoors without protection thanks to its UV resistance. For submerged use, it requires additional mechanical protection. It can also be laid on cable trays, shelves, inside conduits, or fixed to walls.

What are the flexibility characteristics and minimum bending radii of this cable?

The TITANEX H07RN-F cable offers very high flexibility thanks to its class 5 bare copper conductors. Its minimum bending radii are:

Dynamic: 6 to 8 times the cable’s outer diameter.Static: 4 times the cable’s outer diameter (when the diameter exceeds 12 mm).This flexibility simplifies routing in tight spaces.

Is this cable resistant to chemicals, oils, and fire?

Yes, the TITANEX H07RN-F cable has good resistance to chemicals, oils, and vibrations. It is also flame-retardant to IEC 60332-1 and NF C 32-070/C2 standards, and its fire reaction is classified as Eca per EN 50575:2014+A1:2016, which limits fire and smoke generation and propagation.