Replacement Motor, T1/T2 12V
In stock
Technical specifications
Technical specifications
| Operating voltage | 12 V |
| Operating temperature | -20 à +65 °C |
| Max power consumption | 100 |
| Typical power consumption | 100 W |
| Bus compatibility | Aucun |
| Wired network | Aucun |
| Wireless connectivity | Aucun |
| Mounting type | Interne au vérin hydraulique |
| Certifications | BS EN 60945:2002 (CEM),BS EN 28846:1993 (Protection contre l'allumage),Directive CEM 2014/30/UE |
| Drive unit type | Moteur pour vérin hydraulique linéaire |
| Hard-over time | Dépend du vérin (T1: 13 s, T2: 9 s) |
| Mounting hardware included | Non (visserie interne au vérin) |
| Mounting orientation | Toutes orientations (interne au vérin) |
| Integrated rudder angle sensor | Non |
| RF300 rudder feedback | Non (compatible avec les capteurs de barre externes) |
| Dual rudder support | Non |
| Disengageable | Oui |
| Compatible Ram Models | B&G T1, B&G T2 |
| Max Boat Weight T1 Ram | 12000 |
| Max Boat Weight T2 Ram | 20000 |
| Max Thrust T1 Ram | 700 |
| Max Thrust T2 Ram | 675 |
| Weight | 2.225 |
Detailed description
Detailed description
The B&G 12V replacement motor is an essential component designed for B&G T1 and T2 hydraulic cylinders, which are part of marine autopilot systems. This motor provides the driving function within these compact, pre-filled, and sealed units that integrate a hydraulic cylinder, pump, motor, clutch, and reservoir.
Compatibility and Performance of Hydraulic Cylinders
This motor is compatible with the 12V T1 and T2 hydraulic cylinders. The 12V T1 cylinder is intended for boats up to 12,000 kg, offering a maximum intermittent thrust of 700 kg and a rudder time of 13 seconds. Its protection rating is IP67, with an ambient temperature range of -15 to +55 °C. The 12V T2 cylinder is designed for boats up to 20,000 kg, with a maximum intermittent thrust of 675 kg and a rudder time of 9 seconds. It is powered by a 100W motor, requires a NAC-3 computer, and has a protection rating of IP44, with a temperature range of -20 to +65 °C.
Technical Specifications of T1 and T2 Cylinders
The T1 and T2 cylinders integrate a complete hydraulic system, eliminating the need for external pipes or reservoirs. They are designed for installation below deck. These units ensure power and efficiency for autopilot operation, including a Power Steer mode in case of manual steering failure. Internal relief valves protect the unit against rudder shocks or groundings. The robust construction combines an aluminum body, a chrome-plated stainless steel piston rod, and seals made of Nitrile and PTFE.
Your payment information and data are processed securely.
